Analysis and Construction of the Multicoil Induction Cookers
A.K.M. Al Shaikhli2, Amanoeel Thomas Mika2

1Prof. Dr. A. K. M. Al Shaikhli, Department of Electrical Engineering, University, Technology, Baghdad Iraq.
2Amanoeel Thomas Meka, Department of Electrical Engineering, University, Technology, Baghdad Iraq.
Manuscript received on 14 June 2015 | Revised Manuscript received on 23 June 2015 | Manuscript Published on 30 June 2015 | PP: 1-10 | Volume-5 Issue-1, June 2015 | Retrieval Number: A2077065115/15©BEIESP
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (

Abstract: Induction cooker is one of the domestic appliances that enjoins increased demand at the present time, because it has proved its efficiency compared to traditional cookers. Some features of the advantage of the induction cooker are speed in heating and good performance in heat distribution. This paper deals with multicoil induction cookers which can be classified into three types. The first type discuss how to heat any kind of metal loads (magnetic or non-magnetic), while the second type discuss how to increase the diameter of the coil (obtain adaptable – diameter burners formed by concentric planar windings). Finally, the third type discuss the effect of two considerations on the characteristic of the control circuit in the double coil induction cooker, the first is the gap length between the load and heating coil, and the second is the kinds of the load.
Keywords: Induction Cooker, Multicoil Induction Cookers, Adaptable – Diameter Burners, Gap Length Between The Load And Heating Coil , Kinds of The Load.

Scope of the Article: Predictive Analysis