Model of Bottom Hole Assembly with Rotary Steerable System
Sergey Nikitin1, Aleksandr Ashcheulov2, Viktor Lozhechko3

1Sergey Nikitin*, Higher School of Transport, Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Russia.
2Aleksandr Ashcheulov, Higher School of Transport, Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Russia.
3Viktor Lozhechko, Higher School of Transport, Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Russia.

Manuscript received on October 12, 2019. | Revised Manuscript received on 22 October, 2019. | Manuscript published on November 10, 2019. | PP: 3716-3722 | Volume-9 Issue-1, November 2019. | Retrieval Number: A4800119119/2019©BEIESP | DOI: 10.35940/ijitee.A4800.119119
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: This article presents a static model of bottom hole assembly (BHA) with rotary steerable system (RSS). This model is aimed at estimation of control actions generated by RSS actuators upon drilling path definition. The model can be also applied for estimation of BHA strength properties.
Keywords: Directional Drilling, Rotary Steerable System, Push-the-bit, Research, Static Model, Drilling Mode, Soil Strength.
Scope of the Article: Soil-Structure Interaction