Fabrication of Wireless Remote Controlled Electric Lawn Mower
Parthipan G1, Dhiyaneswaran J2, Vimal raja M3, Rajesh K4, Sanjeeviraj K5

1Parthipan G, UG Student, Department of Mechanical Engineering, Sri Krishna College of Engineering and Technology- Coimbatore, Tamil nadu-India- 641008. .
2Dhiyaneswaran J, Assistant Professor, Department of Mechanical Engineering, Sri Krishna College of Engineering and TechnologyCoimbatore, Tamil nadu-India- 641008
3Vimal raja M, Assistant Professor, Department of Mechanical Engineering, Kalaignar karunanidhi Institute of Technology, Coimbatore. Tamil nadu-India- 641402
4K.Rajesh, Assistant Professor, Arunai engineering college – Tiruvannamalai- Tamilnadu – India – 606603
5K.Sanjeeviraj, Assistant Professor, Sreenivasa Institute of Technology and Management Studies, – Murukampattu- Chittoor- Andhra Pradesh517127.

Manuscript received on 02 July 2019 | Revised Manuscript received on 09 July 2019 | Manuscript published on 30 August 2019 | PP: 2024-2027 | Volume-8 Issue-10, August 2019 | Retrieval Number: J93140881019/2019©BEIESP | DOI: 10.35940/ijitee.J9314.0881019
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: Pollution is considered as an important problem in the present world. Usage of Gas Lawn-mowers creates Noise and Smoke pollution which is harmful to the environment. So the replacement of Gas mowers with the Electric lawn mowers which runs by Electric motors will be the better solution. The design objective is to build an electric lawn mower which is controlled by using a micro-controller called NodeMCU. The micro-controller is connected wirelessly to the mobile phone through Wi-Fi. The use of IoT (Internet of Things) in this lawn mower plays a major role. The whole model is controlled with the mobile application. We use a total of three controls in the application which is used to control the movements of the geared motors. Two of these controls are used for the motion of the lawn mower, and the third controls the cutting motor. The speed of all these motion motors can be controlled since analog outputs are obtained from the NodeMCU. Here, human effort is less. Compared to the gas mower, the electric mower has a less pollution rate.
Keywords: Lawn Mower, Electric Motors, Micro-controller, Node MCU
Scope of the Article: Wireless ad hoc & Sensor Networks