2bee9194-bcbf-4721-96dc-affe2d3494ae beie director@blueeyesintelligence.org 10.35940/ijitee.E8670.0310521 P. Sooksaen, S. Suttiruengwong, K. Oniem, and K. Ngamlamiad, "Fabrication of porous bioactive Glass-Ceramics via decomposition of natural fibres," J. Met. Mater. Miner., vol. 18, no. 2, 2008.10.1111/ijag.12618A. Yadav et al., "Melt property variation in GeSe2‐As2Se3‐PbSe glass ceramics for infrared gradient refractive index (GRIN) applications," Int. J. Appl. Glas. Sci., vol. 10, no. 1, pp. 27-40, 2019.10.1016/j.ceramint.2013.09.074M. A. Binhussain, M. Marangoni, E. Bernardo, and P. Colombo, "Sintered and glazed glass-ceramics from natural and waste raw materials," Ceram. Int., vol. 40, no. 2, pp. 3543-3551, 2014.10.3390/ma12122032D. M. Ayala Valderrama, J. A. Gómez Cuaspud, J. A. Roether, and A. R. Boccaccini, "Development and characterization of glass-ceramics from combinations of slag, fly ash, and glass cullet without adding nucleating agents," Materials (Basel)., vol. 12, no. 12, p. 2032, 2019.W. Holland and G. Beall, "Glass-ceramic technology (American ceramic society)," Westerville, OH, 2002.10.1007/978-3-658-17018-9_1M. Stoica, "Theoretical Consideration about Metallic Glasses," in Fe-Based Bulk Metallic Glasses, Springer, 2017, pp. 1-20.10.4236/jcpt.2016.64004G. A. Sycheva, "Crystal growth and nucleation in glasses in the lithium silicate system," J. Cryst. Process Technol., vol. 6, no. 4, pp. 29-55, 2016.10.1007/978-3-319-93728-1_4M. Allix and L. Cormier, "Crystallization and Glass-Ceramics," in Springer Handbook of Glass, Springer, 2019, pp. 113-167.10.3390/ma12071037J.-W. Lee, Y.-I. Jang, W.-S. Park, S.-W. Kim, and B.-J. Lee, "Photocatalytic and Pozzolanic Properties of Nano-SiO2/Al2O3-TiO2 Powder for Functional Mortar," Materials (Basel)., vol. 12, no. 7, p. 1037, 2019.10.1016/B978-0-12-803581-8.10238-3A. Hoppe, E. Boccardi, F. E. Ciraldo, A. R. Boccaccini, and R. G. Hill, "1.10 bioactive glass-ceramics," Compr. Biomater. II, pp. 235-243, 2017.10.1016/j.jnoncrysol.2012.10.017L. Chen, C. Yu, L. Hu, and W. Chen, "Effect of La2O3 on the physical and crystallization properties of Co2+-doped MgO-Al2O3-SiO2 glass," J. Non. Cryst. Solids, vol. 360, pp. 4-8, 2013.10.24294/can.v2i1.875S. H. Din, "Nano-Composites and their Applications: A review," Charact. Appl. Nanomater., vol. 2, no. 1, 2019.10.1016/S0266-3538(03)00062-9C. M. Thompson, H. M. Herring, T. S. Gates, and J. W. Connell, "Preparation and characterization of metal oxide/polyimide nanocomposites," Compos. Sci. Technol., vol. 63, no. 11, pp. 1591-1598, 2003.10.1007/s41779-019-00438-zM. Kozłowski, G. Khater, P. Olesik, and M. Mahmoud, "Preparation and characterization of lightweight glass-ceramics based on industrial wastes," J. Aust. Ceram. Soc., vol. 56, no. 1, pp. 11-20, 2020.10.13036/17533562.58.6.033J. Kang, J. Wang, J. Cheng, X. Peng, Y. Hou, and S. Qian, "Structure and properties of CaO-MgO-Al2O3-SiO2 glasses obtained by vitrification of granite wastes," Phys. Chem. Glas. J. Glas. Sci. Technol. Part B, vol. 58, no. 6, pp. 249-255, 2017.10.1016/j.ceramint.2018.06.099D.-G. Kim, B. Konar, and I.-H. Jung, "Thermodynamic optimization of the K2O-Al2O3-SiO2 system," Ceram. Int., vol. 44, no. 14, pp. 16712-16724, 2018.10.1016/j.jnoncrysol.2016.05.035R. Mishra, M. Goswami, A. Dixit, and M. Krishnan, "Study on thermophysical properties and phase evolution in Nd doped Li2O-Al2O3-SiO2 glass nucleated by multiple nucleating agents," J. Non. Cryst. Solids, vol. 447, pp. 66-73, 2016.10.1016/j.jnoncrysol.2004.01.001K.-D. Kim, S.-H. Lee, and H.-K. Ahn, "Observation of nucleation effect on crystallization in lithium aluminosilicate glass by viscosity measurement," J. Non. Cryst. Solids, vol. 336, no. 3, pp. 195-201, 2004.10.1016/j.jallcom.2018.11.349S. Xu, J. Liu, K. Li, Y. Zhou, and D. Xu, "The role of TiO2 on the microstructure and the electrochemical behavior of Ce0. 8Gd0. 2O2-δ for solid oxide fuel cell electrolyte," J. Alloys Compd., vol. 780, pp. 711-717, 2019.10.1016/j.ceramint.2019.04.125N. S. Canarslan and Ö. S. Canarslan, "Combustion synthesis of SiC-MoSi2-Al2O3 composites," Ceram. Int., vol. 45, no. 12, pp. 14505-14509, 2019.10.4028/www.scientific.net/KEM.726.287Q. L. Wang, X. Y. Huang, J. Yin, J. F. Sun, M. X. Feng, and L. Chen, "Influence of CeO2 Doping on Property of SnO2 Ceramics," in Key Engineering Materials, 2017, vol. 726, pp. 287-291.10.1016/j.actamat.2020.05.030P. Fielitz, S. Ganschow, K. Kelm, and G. Borchardt, "Aluminium self diffusion in high-purity α-Al2O3: Comparison of Ti-doped and undoped single crystals," Acta Mater., 2020.10.3390/ma13020383R. A. Gado, M. Hebda, M. Łach, and J. Mikuła, "Alkali Activation of Waste Clay Bricks: Influence of The Silica Modulus, SiO2/Na2O, H2O/Na2O Molar Ratio, and Liquid/Solid Ratio," Materials (Basel)., vol. 13, no. 2, p. 383, 2020.10.1007/978-981-13-2718-6_3C. Goswami, A. Patnaik, I. K. Bhat, and T. Singh, "Synthesis and Characterization of Composites Al2O3-Cr for 2O3 Artificial-Based Ceramic Hip Joint," Innov. Des. Anal. Dev. Pract. Aerosp. Automot. Eng. (I-DAD 2018), vol. 2, p. 21, 2018.10.1016/j.surfcoat.2020.125402A. Vereschaka et al., "Investigation of the influence of the thickness of nanolayers in wear-resistant layers of Ti-TiN-(Ti, Cr, Al) N coating on destruction in the cutting and wear of carbide cutting tools," Surf. Coatings Technol., vol. 385, p. 125402, 2020.10.1016/j.precisioneng.2016.09.009J. Lu, Q. F. Luo, X. Y. Mao, X. P. Xu, Y. H. Wang, and H. Guo, "Fabrication of a resin-bonded ultra-fine diamond abrasive polishing tool by electrophoretic co-deposition for SiC processing," Precis. Eng., vol. 47, pp. 353-361, 2017.10.1007/s00170-017-0220-6B. Henriques et al., "Copper-nickel-based diamond cutting tools: stone cutting evaluation," Int. J. Adv. Manuf. Technol., vol. 92, no. 1-4, pp. 1339-1348, 2017.10.1002/9781119423829.ch26B. R. Arellano, S. W. Stafford, D. M. Cone, and M. Contreras, "Characterization of Deposits Found on Carrier Panel Tiles Recovered from the Space Shuttle Columbia," Process. Prop. Des. Adv. Ceram. Compos. II, vol. 261, p. 293, 2017.10.1108/MI-07-2016-0053W. Q. Lim, M. Devarajan, and S. Subramani, "Performance of Cu-Al2O3 thin film as thermal interface material in LED package: thermal transient and optical output analysis," Microelectron. Int., 2018.10.1016/j.jnoncrysol.2010.05.103I. Alekseeva et al., "Optical applications of glass-ceramics," J. Non. Cryst. Solids, vol. 356, no. 52-54, pp. 3042-3058, 2010.10.1016/j.ceramint.2017.11.040E. Kleebusch, C. Patzig, T. Hoeche, and C. Ruessel, "The evidence of phase separation droplets in the crystallization process of a Li2O-Al2O3-SiO2 glass with TiO2 as nucleating agent-An X-ray diffraction and (S) TEM-study supported by EDX-analysis," Ceram. Int., vol. 44, no. 3, pp. 2919-2926, 2018.10.1016/j.actamat.2014.12.007F. C. Serbena, I. Mathias, C. E. Foerster, and E. D. Zanotto, "Crystallization toughening of a model glass-ceramic," Acta Mater., vol. 86, pp. 216-228, 2015.10.1111/ijag.12063[33] G. H. Beall, "Milestones in glass‐ceramics: a personal perspective," Int. J. Appl. Glas. Sci., vol. 5, no. 2, pp. 93-103, 2014.10.1016/j.jnoncrysol.2013.03.009M. Dittmer, C. Ritzberger, M. Schweiger, V. Rheinberger, M. Wörle, and W. Höland, "Phase and microstructure formation and their influence on the strength of two types of glass-ceramics," J. Non. Cryst. Solids, vol. 384, pp. 55-60, 2014.10.1111/ijag.12087J. C. Mauro and E. D. Zanotto, "Two centuries of glass research: historical trends, current status, and grand challenges for the future," Int. J. Appl. Glas. Sci., vol. 5, no. 3, pp. 313-327, 2014.10.1007/s10971-015-3935-6X. Guo et al., "Synthesis and application of several sol-gel-derived materials via sol-gel process combining with other technologies: a review," J. Sol-Gel Sci. Technol., vol. 79, no. 2, pp. 328-358, 2016.10.1016/j.jnoncrysol.2019.01.004J. Ye, C. Wen, J. Wu, N. Wen, B. Sa, and T. Zhang, "Mechanical and bioactive properties of lithium disilicate glass-ceramic mixtures synthesized by two different methods," J. Non. Cryst. Solids, vol. 509, pp. 1-9, 2019.10.1016/j.dental.2015.05.003W. Lien, H. W. Roberts, J. A. Platt, K. S. Vandewalle, T. J. Hill, and T.-M. G. Chu, "Microstructural evolution and physical behavior of a lithium disilicate glass-ceramic," Dent. Mater., vol. 31, no. 8, pp. 928-940, 2015.10.1016/j.jmbbm.2015.08.003X.-F. Song, H.-T. Ren, and L. Yin, "Machinability of lithium disilicate glass ceramic in in vitro dental diamond bur adjusting process," J. Mech. Behav. Biomed. Mater., vol. 53, pp. 78-92, 2016.10.1007/s12633-014-9274-3F. H. ElBatal, M. A. Ouis, A. M. Abdelghany, and N. A. Ghoneim, "Structural and optical correlation of gamma-irradiated 3d transition metals-doped lithium disilicate glasses," Silicon, vol. 7, no. 4, pp. 409-417, 2015.10.1016/j.synthmet.2020.116303A. Ashery, A. A. M. Farag, M. A. Moussa, and G. M. Turky, "Enhancement of electrical and dielectrically performance of graphene-based promise electronic devices," Synth. Met., vol. 261, p. 116303, 2020.10.1016/j.memsci.2018.10.085H.-H. Huang, R. K. Joshi, K. K. H. De Silva, R. Badam, and M. Yoshimura, "Fabrication of reduced graphene oxide membranes for water desalination," J. Memb. Sci., vol. 572, pp. 12-19, 2019.10.1016/j.ijleo.2019.02.049M. Yalcin and F. Yakuphanoglu, "Voltage and frequency dependence of negative capacitance behavior in a Graphene-TiO2 nanocomposite photoanode based on quantum dot sensitized solar cells," Optik (Stuttg)., vol. 183, pp. 1099-1105, 2019.10.1016/j.matlet.2019.126683G. Fan, G. Shi, H. Ren, Y. Liu, and R. Fan, "Graphene/polyphenylene sulfide composites for tailorable negative permittivity media by plasmonic oscillation," Mater. Lett., vol. 257, p. 126683, 2019.10.2991/icsd-16.2017.105L.-Y. Zhang and S.-Q. Liu, "Dielectric Properties of Melt and Heat Treated K2O-Al2O3-SiO2-CaO-CuO-TiO2 Samples," in 2nd 2016 International Conference on Sustainable Development (ICSD 2016), 2016.10.1111/jace.14753A. R. Molla et al., "Crystallization, mechanical, and optical properties of transparent, nanocrystalline gahnite glass‐ceramics," J. Am. Ceram. Soc., vol. 100, no. 5, pp. 1963-1975, 2017.10.1016/j.ceramint.2018.01.076W. Zhu, H. Jiang, H. Zhang, S. Jia, and Y. Liu, "Effect of TiO2 and CaF2 on the crystallization behavior of Y2O3-Al2O3-SiO2 glass ceramics," Ceram. Int., vol. 44, no. 6, pp. 6653-6658, 2018.10.1111/jace.16180R. I. Webster and E. J. Opila, "The effect of TiO2 additions on CaO-MgO-Al2O3-SiO2 (CMAS) crystallization behavior from the melt," J. Am. Ceram. Soc., vol. 102, no. 6, pp. 3354-3367, 2019.10.1177/0885328218788832A. Aldaadaa, M. Al Qaysi, G. Georgiou, R. MA Leeson, and J. C. Knowles, "Physical properties and biocompatibility effects of doping SiO2 and TiO2 into phosphate-based glass for bone tissue engineering," J. Biomater. Appl., vol. 33, no. 2, pp. 271-280, 2018.10.1016/j.actamat.2007.08.028A. Aygun, A. L. Vasiliev, N. P. Padture, and X. Ma, "Novel thermal barrier coatings that are resistant to high-temperature attack by glassy deposits," Acta Mater., vol. 55, no. 20, pp. 6734-6745, 2007.10.1016/j.jnoncrysol.2013.03.034M. Chavoutier et al., "Effect of TiO2 content on the crystallization and the color of (ZrO2, TiO2)-doped Li2O-Al2O3-SiO2 glasses," J. Non. Cryst. Solids, vol. 384, pp. 15-24, 2014.10.21647/ICCTEST/2017/48965S. A. BhaskarRaju, K. C. Hemanth, and S. L. N. Jayasimha, "Mechanical characterization of ZA-27 reinforced with SiCp MMCs," in Proc Of Int Conf on Current Trends in Eng Sci and Tech, 2017, pp. 228-232.K. K. Alaneme, K. O. Adeoye, and S. R. Oke, "Mechanical and wear behaviour of steel chips reinforced Zn27Al composites," Leonardo Electron. J. Pract. Technol., vol. 29, pp. 1-16, 2016.10.1177/096369351602500202R. Dalmis, H. Cuvalci, A. Canakci, and O. Guler, "Investigation of graphite nano particle addition on the physical and mechanical properties of Za27 composites," Adv. Compos. Lett., vol. 25, no. 2, p. 096369351602500202, 2016.10.1016/S0261-3069(97)00016-2S. C. Sharma, K. H. W. Seah, B. M. Satish, and B. M. Girish, "Effect of short glass fibers on the mechanical properties of cast ZA-27 alloy composites," Mater. Des., vol. 17, no. 5-6, pp. 245-250, 1996.