bd91481a-4ee6-4884-bfdb-f179604d5aac beie director@blueeyesintelligence.org 10.35940/ijitee.G8890.0510721 S. Kalpakjian, S.Schmid, "Manufacturing processes for engineering materials", Prentice-Hall, Englewood Cliffs, New Jersey; 2003.10.1016/B978-075067069-2/50007-3E.M. Trent, P.K.Wright, "Metal cutting"Butterworth-Heinemann; 2000.10.1016/S0924-0136(02)00930-5F. Draganescu, M. Gheorghe, C.V. Doicin, "Models of machine tool efficiency and specific consumed energy", Int. J. of Mat, Proce.Tech Journal of Materials Processing Technology", vol. 141, no. 1, pp. 9-15, 2003.10.1016/S0890-6955(00)00076-6S. Jayaram, S.Kapoor, R. DeVor, "Estimation of the specific cutting pressures for mechanistic cutting force models", Int. J. of Mat.Tool and Manuf, vol. 4, No.2, pp. 265-281, 2001.T. Gutowski, J. Dahmus, A. Thiriez, "Electrical Energy Requirements for manufacturing processes" Proceedings of 13th CIRP International Conference on Life Cycle Eng, Leuven, 2006, pp. 623, 2006.10.1177/2041297511398541W Li, S. Kara, "An empirical model for predicting energy consumption of manufacturing processes: a case of turning process" Proce. of the Int. of Mech. Engineers Part B-J. of Engg. Manuf., vol. 225, pp. 1636-1646, 2011.10.1016/j.jclepro.2014.01.036V.A. Balogun, P. T. Mativenga, "Impact of un-deformed chip thickness on specific energy in mechanical machining processes" J. of Clea.Prod.,vol. 69, pp.260-268, 2014.10.1016/j.jclepro.2009.08.010F. Pusavec, P. Krajnik and J. Kopa, "Transitioning to sustainable production", Part I: App. on Mach. Tech.J. of Clea.Prod, vol. 18, pp. 174-184, 201010.1016/j.jclepro.2010.01.015F. Pusavec, D. Kramar, P. Krajnik and J. Kopac "Transitioning to sustainable production - Part II: evaluation of sustainable machining technologies"J. of Clea.Prod, vol. 18, pp. 1211-1221, 2010.10.3390/met10020217Yu Su, Guoyong Zhao *, Yugang Zhao, Jianbing Meng and Chunxiao Li, "Multi-Objective Optimization of Cutting Parameters in Turning AISI 304 Austenitic Stainless Steel", Metals, pp. 2-11, 2020.Pengfei Hu, Xiaosong Zhao, "Particle Swarm Optimization for Multi-response Parameter Optimization Based on Desirability Functions" International Conference of Information Technology, Computer Engineering and Management Sciences;2011.10.1142/S0219686715500092S. Panda, M. Mishra, B.B. Biswas, P. Nanda " Optimization of Multiple Response characteristics of EDM process using Taguchi based Grey relational analysis and modified PSO", J. of Adv. Manuf. Sys, vol.14, no. 3, pp. 123-148, 2015.10.1080/21693277.2014.902341Arindam Majunder, Pakaj Kumar Das, Abhishek Majumder, Moutushee Debnath "An Appraoch to optimize the EDM Process parameters using desirability based Multi- Objective PSO", Prod & Manuf Res, vol.22, no.1, pp. 228-240, 2014.10.1016/j.jestch.2019.10.002Bobby Oedy Pramoedyo Soepangkat, Rachmadi Norcahyo, M. Khoirul Effendi, Bambang Pramujati "Multi-response optimization of carbon fiber reinforced polymer (CFRP) drilling using backpropagation neural network-particle swarm optimization (BPNN-PSO)" Engg. Sci. and Tech, an Int. J, vol. 23, pp. 700-713, 2020.10.1088/1742-6596/908/1/012053Azmi, A. I., Syahmi, A. Z., Naquib, M., Lih, T. C., Mansor, A. F., & Khalil, A. N. M. "Effects of machining conditions on the specific cutting energy of carbon fibre reinforced polymer composites". J. of Phy: Conf. Ser, 2017.10.1177/0892705714563121AB Marathe AB, and AM Javali "Effect of drilling parameters on specific cutting energy and delamination of a composite made of unsaturated polyester resin and chopped glass fibres, J of Thermo. Plas. Comp. Mat, vol.29,no. 9, pp. 1261-1281, 2014.10.1016/j.proeng.2013.08.195Rosario D, Manuel G and Maria R "Determination of Energy during the Dry Drilling of PEEK GF30 Considering the Effect of Torque", Proc.Engg. vol.63, pp.687-693, 2013.10.1108/00368790410550679J. P. Davim, Mata, "Influence of cutting parameters on surface roughness using statistical analysis". Ind Lub. Trib, vol. 56, No.5, 270-274, 2004.Syed Altaf Hussain, Pandurangadu V,Palanikumar K, "Surface Roughness Analysis in the machining of GFRP Composites using Carbide Tool(K20)", Euro. J of Sci.Res, vol. 41, no. 1, pp. 84-98, 2010.P.J. Ross, "Taguchi Techniques for Quality Engineering", Tata McGraw Hill, Second Edition, 2005.J. Kennedy, R. Eberhart, R. "Particle swarm optimization". In Proc. IEEE Int. Conf. Neural Networks (ICNN'95), Perth, Australia, 4; 1995, pp. 1942-1948.Syed Altaf Hussain, K. Palanikumar, V. Pandurangadu and G.Venkata subbaiah, " Optimal machining parameters for Minimizing the surface roughness in Turning of GFRP Composites by PCD tooling" Int. Jof App Engg. Res, vol. 5, no.13, pp. 2227-2239, 2010