-4d90550d17f4602e08934c2 20220722052340594 beie:beie director@blueeyesintelligence.org WEB-FORM International Journal of Innovative Technology and Exploring Engineering IJITEE 22783075 10.35940/ijitee https://www.ijitee.org/ 10 30 2019 8 12 Department of Electronics & Telecommunication Engineering, Yeshwantrao Chavan College of Engineering ,RTM University, Nagpur, India. Bharati Masram* P.T. Karule Department of Electronic Engineering, Yeshwantrao Chavan College of Engineering, RTM University, Nagpur, India. In this paper, 8x8x8 3D-DCT/IDCT processor based on CORDIC architecture for high data rate of image processing and video coding with reduced hardware has been presented. It uses two stages of CORDIC DCT processor i.e. one is 1D-DCT and another one is 2D-DCT processor based on fully pipelined unfolded CORDIC architecture with RAM buffer. The one-dimensional DCT is useful in processing of speech waveforms. For images and video signal processing, we need a 3D version of the DCT/IDCT data, especially in coding for compression and decompression, for its best performance. This processor performs both the DCT and IDCT simultaneously with the help of CORDIC algorithm of both 3D-DCT and IDCT which has boost the speed of the processor. Ease the use of less computation based unfolded CORDIC architecture in the processor reduces complexity and power consumption. With the working frequency approximately 414 MHz less power dissipation, low latency and high throughput can be obtained. The processor has been implemented on Xilinx ISE 14.7 and design is simulated in DE-2 board. This processor has not only reduces the complication but also increases the speed which lead to broad use in image and video processing. 10 30 2019 5166 5172 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.L2771.1081219 https://www.ijitee.org/portfolio-item/L27711081219/ Faculty of Computer Science, Mercu Buana University, Jakarta, Indonesia, Amalia Fajar Wati* Indra Ranggadara Faculty of Computer Science, Mercu Buana University, Jakarta, Indonesia. Nia Rahma Kurnianda Faculty of Computer Science, Mercu Buana University, Jakarta, Indonesia. Dhani Irmawan Faculty of Psychology, Mercu Buana University, Jakarta, Indonesia. Dheny Frizki Faculty of Computer Science, Mercu Buana University, Jakarta, Indonesia. Human resources within the company is the most important thing because in managing a company requires competent, creative and innovative human resources. This research was made based on observations from several companies that discuss problems and complaints from employees about human resources in the company. The human resource standard reference application is created using the TOGAF Framework which can help in designing human resource standard references because within the TOGAF framework there are several stages in building a corporate Enterprise architecture. The human resource standard reference application is also supported by UML design method. With these two methods, the human resource standard reference application can become an application for monitoring all data and reports on human resources transparently without having to bother and come directly to the office and in managing information applications of the human resource standard reference using SMS support technology. 10 30 2019 5173 5178 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.L2772.1081219 https://www.ijitee.org/portfolio-item/L27721081219/ Research Scholar ,Deptt of Computer Science &Engg IKGPTU KAPURTHALA, PUNJAB Amandeep Kaur* Anuj Kumar Gupta Professor,Deptt of Computer Science &Engg, CGC, LANDRAN, PUNJAB In this research work, a design has been proposed for the Health Monitoring system that works with statistical equation models. The key advantage of this method is that it can work with different number of health parameters to through light on the health status of a person. The selection of the variables that will form the health monitoring model was done on the basis of three (Pearson, Kendall,spearman) correlation metrics. The root cause analysis based on OLS regression method confirms the mathematical relationship between the health indicators variables. It was found that visceral fat, as health indicator and as a dependent variable can act as function of seven other variables for knowing the health condition of a person. The validation of the model is done on the basis of multiple statistical tests. 10 30 2019 5179 5185 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.L2776.1081219 https://www.ijitee.org/portfolio-item/L27761081219/ Department of Computer Science, Middle East University, Amman, Jordan. Sharefa Murad Aisha Al-Kayem Department of Software Engineering, Princes Sumaya University for Technology, Amman, Jordan. Anood Manasrah Department of Software Engineering, Princes Sumaya University for Technology, Amman, Jordan. Nancy Abu Halemah Department of Software Engineering, Princes Sumaya University for Technology, Amman, Jordan. Abdallah Qusef* Department of Software Engineering, Princes Sumaya University for Technology, Amman, Jordan. Customer satisfaction is a great concern for all companies in all sectors, to measure customer satisfaction it is necessary to measure the service quality to examine the relationship among them. In this paper, SERVQUAL model is used to measure service quality and the effect of these dimensions (tangibles, responsiveness, empathy, assurance, reliability) in customer satisfaction on intelligent transport applications (Uber & Careem) in Jordan by conducting an online questionnaire. The archived results show that Reliability has a high degree of importance on the impact of customer satisfaction and 89.2 % of the sample prefer to use Uber & Careem smart app rather than traditional taxis. 10 30 2019 5186 5192 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.L2777.1081219 https://www.ijitee.org/portfolio-item/L27771081219/ CSE department, GRIET, Hyderabad, India. G. Karuna* Bijjam Goutami CSE department, GRIET, Hyderabad, India. B. Rupa CSE department, GRIET, Hyderabad, India. Fog computing is considered as a significantly virtualized perspective that can enable preparing at the Internet of Things devices, living in the edge of the framework, to convey organizations and applications even more capably and feasibly. Since Fog preparing starts from and is a non-minor development of circulated registering, it gets various security and insurance troubles of dispersed processing, causing the expansive stresses in the examination gathering. To engage genuine and confidential exchanges among a social occasion of fog centre points, proposes a capable key exchange show in perspective on figure content approach characteristic based encryption to develop secure correspondences among the individuals. To achieve confidentiality, approval, capriciousness, and access control, to join CP-ABE and mechanized mark techniques. The proposed method explores the efficiency to show similar to security and execution. 10 30 2019 5193 5197 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.L2778.1081219 https://www.ijitee.org/portfolio-item/L27781081219/ Department of Electronics and Communication Engineering, Vellore Institute Of Technology, VELLORE University, India. Rahul Varma* Ravi Kumar CV Assistant Professor, Department of Digital Electronics and Communication Systems, Jawaharlal Nehru Technological University, Ananthapur, India. Spectral efficiency and delay are important design metrics that should be taken into consideration while designing a LTE/LTE-A network. Various factors effect these metrics in various ways. In this paper we will be analyzing spectral efficiency vs number of users and delay vs number of users in a 4G LTE network. Additionally, we will be analyzing effect of different scheduling types on delay and throughput of the network. The scheduling types we compare are maximum throughput, proportional fair and round robin. We will conclude on a scheduling type that gives us the least delay and maximum throughput. In view of the Universal Mobile Telecommunications System (UMTS) Long Term Evolution (LTE) technology, this paper considers multiple input multiple output (MIMO) capacity enhancement 10 30 2019 5198 5202 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.L2804.1081219 https://www.ijitee.org/portfolio-item/L27791081219/ Associate Professor, Dept. of ECE, CMR Engineering College, Kandlakoya, Telangana, India B Siva Kumar Reddy* Anuj Kumar Goel Professor, Dept. of ECE, CMR Engineering College, Kandlakoya, Telangana, India With the advent of wireless communication, the problem of data security is of greatest interest. In this paper, spread spectrum techniques have been employed due to its advantages in providing data security. Further, the mechanical integrity of a transformer is investigated using an off-line diagnosis test called as Frequency Response Analysis (FRA). The FRA data of a transformer has been taken as the input signal which is being transmitted from the field where transformer is kept and received at the control room. Furthermore, Direct Sequence Spread Spectrum (DSSS) and Frequency Hopping Spread Spectrum (FHSS) are employed on FRA data and analyzed the signals by transmitting over Additive white Gaussian noise (AWGN) and Rayleigh faded Channels. 10 30 2019 5203 5210 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.L2780.1081219 https://www.ijitee.org/portfolio-item/L27801081219/ Dept. of Computer Science & IT, Dr.B.A.M. University, Aurangabad, India. Bharti B. Balande* Sachin N. Deshmukh Dept. of Computer Science & IT, Dr.B.A.M. University, Aurangabad, India. Opinions from others play a significant part to take our own decision, The people’s opinions, attitudes and emotions are a computational study toward an entity is called as Sentiment Analysis (SA) or Opinion Mining (OM). In today's world, everything like business, organization and even individuals wants to know opinion from public or customers about their presentation, products and about their services which will give clear idea about their product, portfolio in the market and if these services is not up to the mark how their services they improve, so that their business will perform better. To give output as positive, negative or neutral and find the difference of a specified user text or data from the dataset is the main task of the sentiment or opinion analysis. The opinions, sentiments and subjectivity of text are computational treatment in text mining with Sentiment Analysis (SA). With the help of sentiment analysis this paper describe the machine learning classification techniques for hotel reviews for which dataset obtained from Trip advisor hotel reviews website. System got 99.07 % accuracy for MAXENT Classifier with Train size and Test size 80% and 20% respectively. 10 30 2019 5211 5213 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.L2781.1081219 https://www.ijitee.org/portfolio-item/L27811081219/ Assistant Professor, Department of ECE, Salem. Anand R* Kalkeseetharaman P.K Department of ECE, Sona College of Technology, Salem. Naveen Kumar S Department of ECE, Sona College of Technology, Salem. Automatic Face expression is the significant device in computer apparition and a predictable knowledge discovery application in automation, personal security and moveable devices. However, the state-of-the-art machine and deep learning (DL) methods has complete this technology game altering and even better human matching part in terms of accurateness. This paper focuses on put on one of the progressive deep learning tools in face expression to achieve higher accuracy. In this paper, we focusses on Automatic Facial Expressions and Identification of different face reactions using Convolution Neural Network. Here, we framed our own data and trained by convolution neural networks. Human behavior can be easily predicted using their facial expression, which helps marketing team, psychological team and other required team to understand the human facial expression more clearly. 10 30 2019 5214 5218 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.L2782.1081219 https://www.ijitee.org/portfolio-item/L27821081219/ Musa,,Ph.D. Students, Civil Engineering Department/ Near East University/ North Cyprus, Nicosia, Via Mersin 10, Turkey. Muhammad Khidre Musa* Hazar M. Nassrullah Master Students, Civil Engineering Department/ Near East University/ North Cyprus, Nicosia, Via Mersin 10, Turkey. Rolled compacted concrete (RCC) is important of newly technique in construction of pavement. that can be employed in low traffic or high trafficked roads. Due to its inexpensive, quick creation , durable and low maintenance RCC is becoming more commonly gradually . If the UHPC compared to normal concrete has some privilege such as plenty stability and supreme permanence however the utilization of it is restricted owing to its expensiveness and minimal cods for design.. Its constancy leads to its stay persistent when subjected to vibratory compacter, since it has sufficient wetting so it causes permit enough mixing and repartition of paste without segregation. Fly ash, silica fume and some admixture can be utilized to concrete to decrease the quantity of water cand generate high arid mixture. 10 30 2019 673 678 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.L2783.1081219 https://www.ijitee.org/portfolio-item/L27831081219/ Research scholar, National Institute of Technology Jamshedpur, Jharkhand, India. Gopinath Chakkarapani* Prahlad Prasad Associate professor, Department of Civil Engineering, National Institute of Technology Jamshedpur, Jharkhand, India. Arvind Kumar Lal Srivastava Professor, Department of Civil Engineering, National Institute of Technology Jamshedpur, Jharkhand, India. Structural integrity with smaller structural plan density is doubtful under earthquake loading, while the structure is supposed to undergo inelastic deformation. Recent past damages under moderate earthquakes have raised a lot of questionnaires to the existing seismic design procedures. Drift controlled damage indices are consistently under reappraisal because of our better understanding of dynamic loading. Hence, energy based concept is suggested in an effort to explicate the response of building systems during earthquake loading. In this paper, explicit expressions for various components of energy i.e. strain, kinetic, damping and inelastic energy versus drift have been derived and discussed with the post processing results of building systems under varying strong earthquake motions. The incremental dynamic analysis is used in our study and the results show that the energy criterion analysis gives better one than the drift criterion for the structures subjected to earthquake ground motions. 10 30 2019 5836 5845 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.L2786.1081219 https://www.ijitee.org/portfolio-item/L27861081219/ Department of Computer Science & Engineering, S J B Institute of Technology, Bengaluru, India. Pavithra G S* Dr. Babu N V Department of Electrical & Electronics Engineering, S J B Institute of Technology, Bengaluru, India. The Wireless Sensor Network (WSN) is a collection of a various number of sensor node involved in a tremendous region for communicating data packets from one place to another in a productive way. The most significant techniques in the WSN are clustering, power consumption, lifetime and productive transmission of information in a secured manner with interconnected mobile nodes in networks. The clustering is the process of grouping the nodes for sharing the data packets to one cluster member to another cluster member through cluster heads present in the networks, which saves energy. Hence, K-Means clustering algorithm is used along with the Hybrid Ant Colony and Particle Swarm Optimization (HACOPSO) to produce a hierarchy of each CHs and observe that the energy savings increase with the number of levels present in the hierarchy. Ad hoc On-Demand Distance Vector Routing (AODV) uses two different operations to find and maintain routes: the route discovery process operation and route maintenance. Therefore, “K-Means-HACOPSO” methodology precisely transmit data from source to destination by evaluating better through-put, packet delivery ratio, packet loss, end-to-end delay and energy consumption in a secured environment. 10 30 2019 5219 5225 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.L2789.1081219 https://www.ijitee.org/portfolio-item/L27891081219/