-4d90550d17f4602e089247a 20220709074605821 beie:beie director@blueeyesintelligence.org WEB-FORM International Journal of Innovative Technology and Exploring Engineering IJITEE 22783075 10.35940/ijitee https://www.ijitee.org/ 11 30 2019 9 1 Computer Science and Engineering, SRM Institute of Science and Technology, Ramapuram Campus, Chennai, India. Gaurav Aggarwal* Harshal Chaukse Computer Science and Engineering, SRM Institute of Science and Technology, Ramapuram Campus, Chennai, India. Ali Sualeh Computer Science and Engineering, SRM Institute of Science and Technology, Ramapuram Campus, Chennai, India. Since The Mechanical Miracle Happened In Light Of The Fact That Most Of The Calculations And Estimations Of The Segments Required For The Collecting And Limit Of A Particular Thing Has Been Done Physically But At This Point This Example Has Changed With The Introduction Of Iot Devices In Organizations. These Gadgets Impart And Share Information With One Another Over Web To Make The Way Toward Assembling Less Confounds And Efficient. For Instance, A Sensor Has Been Appended To The Machine Which Estimates The Measure Of Vibrations Which Are Delivered While The Machine Is Working. This information is then moved to a server over WLAN which can be viewed to or by any individual who is working in the organization and after that be examinations to know the state of the said machine. Along the lines any meltdown or breakage in system or in process that can occur because of unseemly use of the machine can be avoided. This information can be seen by individuals who work for the organization, who has a login id and secret key and has a gadget with a working web association as this information is visible or displayed on a site that can be gotten to on any gadget utilizing any working framework. The server that stores the information is kept running on MS Windows and the webpage from which the information can be gotten to is made utilizing different web improvement dialects. 11 30 2019 371 375 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4137.119119 https://www.ijitee.org/portfolio-item/A4137119119/ School of Computer Science, University of Petroleum and Energy Studies. Dehradun, India Ved Prakash Bhardwaj* Piyush Chauhan School of Computer Science, University of Petroleum and Energy Studies, Dehradun, India, Nitin Indian Institute of Management, Shillong, India, In today’s world, online payment system is one of the essential requirements of people. Security in online transactions is still a major challenge for the researchers. This work is emphasizing on providing highly secure environment for online transactions to user. One time password is one of the mechanisms to reduce online fraud, still many cases of fake transactions are happening frequently. It requires more attention to establish the faith in E-banking services. The present research article is proposing a multi-factor based secure algorithm which enhances the security for the online transaction services. To increase the authenticity, the proposed algorithm is working on two strategies: a) One Time Password Based Authentication and b) Dedicated Hardware Based Authentication. 11 30 2019 376 380 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4138.119119 https://www.ijitee.org/portfolio-item/A4138119119/ Animal Husbandry Program Study, Department of Animal Husbandry Education and Welfare, Polbangtan Malang, East Java, Indonesia. Yudi Rustandi* Setya Handayani Animal Husbandry Program Study, Department of Animal Husbandry Education and Welfare, Polbangtan Malang, East Java, Indonesia Indah Listiana Agribusiness Department, Faculty of Agriculture, University of Lampung, Bandar Lampung, 35145, Indonesia. Dafit Ariyanto Faculty of Agriculture, Kisaran, Sumatera Utara, Indonesia, Islamic boarding school is one of the islamic educational institutions that grow fastly with diversity method in Indonesia This study is aimed to describe the effort to grow young entrepreneur at Islamic Boarding School al Ittifaq Ciwidey Bandung through agribusiness activity with a focus on student empowerment. The study was done at Al-Ittifaq Ciwidey Bandung by applying qualitative research approach. Informants were selected by means of purposive sampling and snowball sampling which were further classified into three groups (triangulation). Furthermore, data collection technic was conducted through in-depth interview, direct observation, documentation, and FGD (Focus Group Discussion). Data analysis technic was performed using interactive model. Regarding the effort to grow young entrepreneurs, result of the study shows that student at al Ittifaq Ciwidey Bandung involve in agribusiness activities such as: (1) the formation of Executive Board of Agribusiness Unit, (2) conducting technical practices directly in the field, (3) establishing Agribusiness Incubation Center (PIA), (4) establishing cooperation/partnership with various institutions, and (5) setting up agribusiness groups of students. 11 30 2019 1418 1424 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4140.119119 https://www.ijitee.org/portfolio-item/A4140119119/ Department of Electronics and Communication Engineering, NSS College of Engineering, Palakkad, Kerala, India and Research Scholar, University of Calicut, Kerala, India. Anil Kumar K.R* Noushira K.I PG Scholar, Department of Electronics and Communication Engineering, NSS College of Engineering, Palakkad, Kerala, India. Meenakshy K Department of Electrical and Electronics Engineering, Government Engineering College, Thrissur, Kerala, India.. Deep learning (DL) as well as feature learning by unsupervised methods have made tremendous consideration in the past decades because of its great and dynamic capacity to change input data into high level depictions by means of various machine learning (ML) methods and approaches. Therefore these interests have also showed a fast and steady growth in the arena of medical image analysis, especially in Diabetic Retinopathy (DR) classification. On contradiction, manual interpretation involves excessive processing time, large amount of expertise and work. Sternness of the DR is analyzed relative to the existence of Microaneurysms (MAs), Exudates (EXs) and Hemorrhages(HEs). Spotting of DR in its early stage is crucial and important to avoid blindness. This paper proposes an algorithm to build an automated system to extract the above mentioned DR features which are the elemental and initial signs of diabetic retinopathy. Initial step in this algorithm is preprocessing of the original image. The next step in this features extraction algorithms is elimination of optic disc (OD) and blood vessels which have similar characteristic with these features. Blood vessels are segmented using Multi-Level Adaptive Thresholding. OD is segmented using morphological operations. Feature extraction and classification is achieved by using deep Bag of Feature (BoF) model which uses Speeded Up Robust Features Our method achieved 100% acuuracy in DRIVE database and over 90% accuracy for e-OPTHA database. Thus, the proposed methodology represents a track towards precise and highly automated DR diagnosis on a large substantial scale along with better sensitivity and specificity. 11 30 2019 381 385 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4145.119119 https://www.ijitee.org/portfolio-item/A4145119119/ Lecturer, Faculty of Social Sciences, National University of Uzbekistan, Tashkent, Uzbekistan. Solikha N. Allayarova* The Information and Communication Technology (ICT) is the powerful tool for the successful delivery of quality education in higher institutions. A range of countries understanding the full benefit of it have already implemented and developing the usage of ICT in higher education sector, though in Uzbekistan still can be faced some challenges on this regard. The purpose of this study is therefore to contribute to the growing evidence on the use and acceptance of ICT by higher institutions of learning in Uzbekistan. The paper critically analyzes the current students’ and teachers’ perceptions on ICT usage, involving 23 higher educational institutions in Uzbekistan and provides some recommendations on improvement through studying international experience. 11 30 2019 386 392 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4146.119119 https://www.ijitee.org/portfolio-item/A4146119119/ Public Works Department, Ministry of Works, Kuala Lumpur, Malaysia. Salhana Ismail Aizat Mohd Taib* Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi, Selangor, Malaysia. Norinah Abd Rahman Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi, Selangor, Malaysia. Dayang Zulaika Abang Hasbollah Faculty of Civil Engineering, Universiti Teknologi Malaysia, Skudai, Johor, Malaysia. Ahmad Bukhari Ramli Kulliyyah of Engineering, International Islamic University Malaysia, Kuala Lumpur, Malaysia. Nowadays, a large amount of municipal solid waste (MSW) is generated due to the rapid urbanisation in developing countries leads to the demand for larger and higher capacity landfills. Bioreactor landfill technology has been introduced to accelerate the stability of landfill and to solve the issue of limited landfill area. However, the accelerated degradation of the refuse in bioreactor landfills also considerably changes the geotechnical characteristics of the waste in the landfill and thereby increases the concern for waste stability. Hence, this study aims to analyse the stability of both conventional and bioreactor landfill slope with the effects of waste degradation. Finite element method has been used in the slope stability analysis and the stability is presented by the factor of safety. The objectives of this study are i) to determine and assess the main parameter which influences the stability of the waste slope, ii) to determine the effects of waste degradation to the waste properties and iii) to obtain the factor of safety of the landfill slope using numerical analysis by finite element method. From the literature review, it is found that slope stability of a landfill mainly depends on the geotechnical properties of waste, such as moisture content, unit weight, shear strength parameters and hydraulic conductivity of waste. After the degradation process, engineering properties of field refuse are affected which includes the increased pore-water pressure and unit weight, decreased strength and lower hydraulic conductivity. Based on the analysis of conventional landfill slope stability by using Plaxis software, slope ratio of 1:3, 1:4 and 1:5 calculated safe with 1.69, 2.3 and 2.8 whereas the analysis of bioreactor landfill slope stability calculated safe only for slope ratio of 1:4 and 1:5 with 1.60 and 1.97. Moreover, the factor of safety for steeper slopes is lower and vice versa. From the parametric analysis, it is found that the full height of slope and unit weight of waste input affect the result analysis. This study is significant to evaluate the landfill slope stability with the effects of waste degradation and to ensure both conventional and bioreactor landfill slope stability for long periods. 11 30 2019 393 398 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4148.119119 https://www.ijitee.org/portfolio-item/A4148119119/ Assistant Professor, Mathematics Department of Science and Humanities,Saveetha School of Engineering, SIMATS, Chennai, India. Ms.K.Ruth Evangelin* Dr. G. Arul Freeda Vinodhini Assistant Professor (senior grade), Dept. of Science and Humanities (Mathematics) at Saveetha School of Engineering, SIMATS, Chennai. S, India. Dr.V.Vidhya obtained Assistant Professor, Department of Mathematics, VIT, Chennai, India. Liver transplantation is done widely across the world. Every year, many people are waiting for a donor liver. Depending on the blood group and MELD score, the priority is given to the waiting patients. Here, we have presented the quasi birth death process of the liver transplantation model and analysis of its parameters are done using simulation technique. Simulation results are presented for different values of the threshold. 11 30 2019 399 403 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4149.119119 https://www.ijitee.org/portfolio-item/A4149119119/ Department of Civil and Environmental Engineering, Universiti Teknologi PETRONAS, Perak, Malaysia. Aniq Asyranie Zahidy Muslich Hartadi Sutanto Department of Civil and Environmental Engineering, Universiti Teknologi PETRONAS, Perak, Malaysia. Madzlan Napiah Department of Civil and Environmental Engineering, Universiti Teknologi PETRONAS, Perak, Malaysia. Zahidy Abd Hamid* Perunding Nusajasa S/B, Pahang, Malaysia. As with the most of middle-income countries, road traffic accidents (RTAs) in Malaysia constitute a serious public health challenge to the nation. Despite the fact that great efforts have been made to understand the causation factors of RTAs, little is known about how road service quality (RSQ) impacted road safety. The primary objective of the current study was to explore the relationships of RSQ and RTAs from the viewpoint of the Malaysian road users. The study employed a quantitative research approach with the use of a self-administered questionnaire instrument to survey a group of road users. In particular, this paper reports the first phase of the study, that is, to develop and administer an instrument to measure the relationships of RSQ and RTAs. A two phased approach was undertaken to determine face and content validity, and reliability of this instrument. The face and content validity were achieved by assembling a panel of academia and industry practitioners to ensure that wording of the items, and the development of the scale, were comprehensible for data inquiries. Reliability and internal consistency testing were achieved by employing the exploratory factor analysis (EFA) to model the interrelationships among items, and Cronbach’s alpha to evaluate the extent to which the items measure the same construct. Then, the instrument was pilot-tested by administration to a convenience-quota sample of 24 road users who stopped at the rest and service areas along the case study expressway. The results have pointed to the indication that the measurement instrument reached the accepted levels of internal reliability. Thus, it can be concluded that the developed instrument able to collect sound quality survey data and could enable the next stage of the study draws a valid and generalized conclusion. This paper highlighted the value of pilot testing in terms of improving the design of research studies that contributes to the development of best practices in RTAs research. Finally, the outcomes of the study should become a source for policy makers or local authorities to have better understanding of the safety outcomes of road service quality from which the prevention measures of RTAs could be improved. 11 30 2019 719 725 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4152.119119 https://www.ijitee.org/portfolio-item/A4152119119/ Department of Computer Science and Department SRM Institute of Science and Technology, Chennai, India. A. Vidhyavani* P.V. Sumanth Department of Computer Science and Department SRM Institute of Science and Technology, Chennai, India. U. Surendra Department of Computer Science and Department SRM Institute of Science and Technology, Chennai, India. V. Chakradhar Department of Computer Science and Department SRM Institute of Science and Technology, Chennai, India. Now a day’s Artificial intelligence is very important. To eradicate the media piracy on the internet we are going to implement the technique called the page replacement algorithm by using the artificial intelligence. Detecting and stopping by manually it is not possible to remove manually. The page replacement algorithm will help to detect the media piracy on the internet. Internet means that any of the social media platforms like gmail ,youtube,drives etc. By using this page replacement algorithm we are going to achieve. This algorithm will helps to detect it will divide into the number of frames each page has the several frames .Each frame in the page get scanned by the page replacement algorithm . Based on this technique replaces the page that used for the long period of time. This page replacement algorithm has to work very fastlly and consumes the less memory. This technology has controlled by the any government companies. The government has specified companies to detect such piracy. The LRU technique maintains the backward of the page. This LRU helps within seconds to detect the piracy on the internet. 11 30 2019 404 407 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4154.119119 https://www.ijitee.org/portfolio-item/A4154119119/ Associate Professor, Department of CSE, Sir CRR Engineering College, Eluru. AP. India. J.S.V.G Krishna* Dr.M.Venkateswara Rao Professor, Department of IT, GITAM Uniersity, Visakhapatnam, AP, India. K. Sudhakar Associate Professor, Department of CSE, PSCMR College of Engineering and Technology, Vijayawada, AP, India. With the developing utilization of data innovation in all life areas, hacking has turned out to be more contrarily powerful than any other time in recent memory. Additionally, with creating advances, assaults numbers are developing exponentially like clockwork and become progressively refined so conventional I.D.S ends up wasteful recognizing them. We accomplish those outcomes by utilizing Networking Chabot, a profound intermittent neural system: Long Short Term Memory (L.S.T.M) [2]over Apache Spark Framework that has a contribution of stream traffic and traffic conglomeration and the yield is a language of two words, typical or strange. The new and proposed blending ideas of the language are preparing, relevant examination, circulated profound adapting, huge information, and oddity discovery of stream investigation. We propose a model that portrays the system dynamic typical conduct from an arrangement of a great many parcels inside their unique circumstance and examines them in close to constant to identify point, aggregate and relevant inconsistencies. The examination shows lower false positive, higher identification rate and better point abnormalities location. With respect to demonstrate of relevant and aggregate oddities identification, we talk about our case and the explanation for our speculation. Be that as it may, the investigation is done on arbitrary little subsets of the dataset as a result of equipment restrictions, so we offer examination and our future vision musings as we wish that full demonstrate will be done in future by other intrigued specialists who have preferable equipment foundation over our own.. 11 30 2019 1779 1784 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4155.119119 https://www.ijitee.org/portfolio-item/A4155119119/ Pursuing Post-Graduation in Computer Science and Engineering in Noorul Islam Centre for Higher Education. Anusha Linda Kostka. J. E* S. Vinila Jinny Associate Professor, Department of Computer Science and Engineering, Noorul Islam Centre for Higher Education, Kumaracoil. Liver Segmentation has become one of the most efficient and systematic tasks in the case of medical applications. Recently, the segmentation of liver has found its part in the research areas also. It has become a common feature to hinder the accurate and the proper segmentation of the liver intensities and its neighbor organs in the human body. Different techniques of liver segmentation can be performed with CT images, MRI images and PET. Among these CT images have a wide application in the detection, identification and segmentation of the liver deficiencies. Manual segmentation of the liver seems to be more time consuming yielding less precision and robustness. Nowadays, many techniques have been developed for the segmentation of liver that are more efficient, fast with accurate as well as better results than the traditional methods. 11 30 2019 2381 2384 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4157.119119 https://www.ijitee.org/portfolio-item/A4157119119/ Associate Professor, Department of Electrical Engineering, College of Engineering, Taif University, Ahmad A. Alahmadi* This work introduces the design and development plan of a reliable, smart, secure, automation solution, applying modern design methodology, for solving real-life problems faced by many residents and related to the process of car parking inside a home garage, as well as, security and economy issues. The suggested solution is intended for achieving comfort, security and economy as a part of home automation. The solution consists of two main subsystems; security identification subsystem and the automated garage subsystem. The security identification subsystem is suggested to be placed inside the car on front tableau. The two subsystems are communicating with each other wirelessly, the whole automated garage system are activated from sleep mode and waiting for further actions, when a vehicle or a human is detected in the front of the gate by means of two sensors, or when identification signal is send from security identification subsystem. For maximum reliability and depending on customer needs, the security subsystem is designed to identify the residents, to have a permission to enter the garage by matching all of the following; face image, fingerprint, voice print, written password, specified oral password word, specially designed remote control board or radio frequency identification (RFID) card along with a alarm features. When the residents identified, the garage subsystem is activated in terms of controlling the garage gate open/close process and controlling electrical components including lighting, ventilation and surveillance camera. Each of the two subsystems, as well as overall system, was physically prototyped, tested in real situation successfully. 11 30 2019 408 413 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4162.119119 https://www.ijitee.org/portfolio-item/A4162119119/ Research Scholar, SRM University, Sonepat, (Haryana) India. Shakti Arora* Dr. Surjeet Dalal Professor, Teerthanker Mahaveer University, Moradabad (U.P), India. Cloud Computing Is Increasing Its Reach To The Edge Of The Computing Devices. Day By Day Dependency Of The Users Is Increasing On Cloud. Infrastructure As A Service Model Is The Widely Adopted And Used Model Of Cloud Computing Where Storage Is The Primary Concern To Be Shared And Used. Security Of The Shared Storage Is The Major Challenge, A Number Of Techniques And Security Algorithms Are Designed To Provide The Security And Accuracy Of The Data. We Designed A One Strong Integrity Security Algorithm That Provides The Integrity Verification Of The Stored Data Without The Intervening The Role Of Tpa. The Data Stored On The Server Can Be Compromised With Number Of Security Attacks; We Studied The Major Security Attacks That Are Affecting The Data. In This Paper We Will Demonstrate The Attack Simulation Of Ddos Attack And Calculated The Effects Of Attacks On Running System And Performance Of The System Under Critical Timings Of Attack. The Result Of The Attack Simulation Shows That The Designed System Is Stable And Working Efficiently After The Attack. The Trust Level Achieved Is Approximately Similar To The Original Trust Achieved Without Injecting The Attack. 11 30 2019 414 417 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4163.119119 https://www.ijitee.org/portfolio-item/A4163119119/ Professor & Head of Dept., Computer Science and Engineering, Sreenidhi Institute of Science and Technology, Hyderabad, India. Dr. Aruna Varanasi* SSK Teja Madduri Student, Department of Computer Science and Engineering, Sreenidhi Institute of Science and Technology, Hyderabad, India. Alekya Malka Student, Department of Computer Science and Engineering, Sreenidhi Institute of Science and Technology, Hyderabad, India. Vineeth Chepuri Student, Department of Computer Science and Engineering, Sreenidhi Institute of Science and Technology, Hyderabad, India In hospitals, Saline/Fluids is/are injected into the patient’s body to treat dehydration/diseases in order to improve their health. Monitoring the fluid level and regulating its flow manually has always been a typical problem as it involves much attention by nurse constantly. Any kind of negligence or preoccupied states might invoke a possibility of backflow of blood (and swelling) from the concerned patient. Also blood transfusion using traditional method has a drawback regarding the accuracy in transfusing blood from one patient’s body to another. Considering all these affordable health monitoring systems should be made available to every hospital in the days to come. AUTOMATED FLUID TRANSFUSER deals with these problems. This will accurately assimilate the advised portion of saline/fluid/blood into the patient’s body. It alerts the nurse by sending notifications regarding the status of fluid level and in parallel regulates the flow, thereby averting the chance of backflow of blood and reducing the swelling. Automated fluid transfuser can be used in hospitals and homes for the bed ridden patients. It is not complex in operating to nurse or guardians. 11 30 2019 418 420 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4164.119119 https://www.ijitee.org/portfolio-item/A4164119119/ Research Scholar, Department of Mechanical Engineering, Karpagam Academy of Higher Education, Coimbatore - 641021, India D. Prasanna Venkatesh Dr. P. Shanmughasundaram* Department of Automobile Engineering, Karpagam University, Coimbatore (Tamil Nadu), India. The outcome of cryogenic treatment (CTT) on the mechanical behaviour of Al alloy LM 25, LM25+5% fly ash and LM25+10%fly ash composites was investigated. Cryogenic treatments were performed with threedifferent soaking periods (0 hr (Untreated), 12hr, 24hr) ata constant cryogenic temperature of -196°C. After the CTT, the mechanical behaviour of the materials was measured. It is obvious that LM25+10% fly ash composites exhibitbetter mechanical properties than the LM25 and LM25+10% fly ash composites.As cryogenic soaking period increases mechanical properties of the MMCs tend to increase too. The effect of fly ash mass percentage and cryogenic soaking period on the mechanical behaviour of materials was studied by using Taguchi and Analysis of Variance (ANOVA). 11 30 2019 1425 1431 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4167.119119 https://www.ijitee.org/portfolio-item/A4167119119/ Information Technology, Amity International Business School, Noida, India. Dr Loveleen Gaur* Ravi Ramakrishnan Research Scholar, Amity International Business School, Noida, India. The Manufacturing sector in India is still not globally competitive (Deloitte, 2018) due to over emphasis on labour based production, lesser automation, legacy manufacturing assets and production plants, energy inefficient systems, usage of Information Technology to integrate the physical and cyber world for potential benefits which other countries have adopted (Rockstorm, 2018) is almost non-existent. According to sources adoption of IoT enabled Industry 4.0 can lead to decrease of production costs by up to 30%, logistics costs by 30% and quality management costs by up to 20% (Thomas, 2016). This study starts with a literature review of the factors that determine the manufacturing competitiveness index of India and how other developed countries are proceeding in these as compared to India. The study proceeds with identification of key determinants or constructs (abstract dimensions) of measuring the IoT maturity of any organization along with their relative weights and then identify the key factors (measurable) inside each construct. These constructs are hypothesized to be the building blocks of any IoT strategy to be adopted by Indian manufacturing concerns. By using these constructs definition, along with factors and possible measurable states, in which the factors can exist, an excel based IoT Maturity Self-Assessment tool has been developed which can be used by target Indian manufacturing organizations to identify their current state of preparedness. The objective of this study is to define an Internet of Things Maturity Model (IoT-MM) which can be used by organizations to assess their current status. Indian manufacturing has started adopting IoT but in a disoriented manner, with adoption being guided more by technology consideration than a holistic business drive and consideration encompassing the benefits of productivity, energy conservation and environmental management. 11 30 2019 2473 2479 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4168.119119 https://www.ijitee.org/portfolio-item/A4168119119/ Department of Computer Science, Sri Ramakrishna College of Arts & Science, Coimbatore, India. D.Nethra Pingala Suthishni* Anna Saro Vijendran Department of Computer Science, Sri Ramakrishna College of Arts & Science, Coimbatore, India. The key determination of researches on cluster-based Mobile Ad-hoc Networks (MANETs) and the election of consistent energy holding Cluster Head (CH) is to improve the lifetime of the network. Both in real-time as well as non-real-time basis data are collected and spread accordingly. Energy efficiency is said to be the major concern in MANET. Every node in the network supplied with preferred node energy and it will get exhausted whenever node transmits the data. When node runs out of energy transmission may be failed. In order to avoid transmission failure, energy-efficient methods are incorporated in data transmission. In this paper, a clustering method is proposed which is grounded by the Grid-based model. Static sinks in the MANET transmit the data to the transmission area which is distant to the destination that may lead to the energy-hole problem. Hence, an efficient approach is proposed wherein a centralized cluster configuration by the mobile sink is used for Grid-Based Clustering (GBC) and Verification algorithm to achieve improved energy balance to thereby extending network lifetime in the network. The simulation results depict that the GBC and Verification method can effectively increase the network lifetime and energy dissipation. 11 30 2019 421 430 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4174.119119 https://www.ijitee.org/portfolio-item/A4174119119/ Research Scholar, Dr. BAMUA, Assistant Professor Department of E&TC, PICT, Pune, Maharashtra, India. Mohammed Zakee Ahmed* Dr. Ajij D Sayyad Associate Professor, Department of E&TC, MIT Aurangabad, Maharashtra, India. Most of the wireless standards used these days, heavily rely on Orthogonal Frequency Division Multiplexing (OFDM). Peak to Average Power Ratio (PAPR) is one of the known key acknowledged confines of OFDM. Reduced PAPR at OFDM transmitter helps power amplifier to operate in stable mode and reduction in complexity of digital to analog converter (DAC). Several PAPR reduction techniques have been evolved from different principles such as signal scrambling techniques, such as Partial Transmit Sequence (PTS), signal distortion techniques such as Clipping, etc. Reducing PAPR degrades bit error rate (BER) or computational complexity. PTS is one of the best methods of PAPR reduction. There is large scope of betterment of PTS to get a best PAPR reduction technique. In this paper we have concentrated on PTS scheme by exploring PTS and its variants evolved over a period of time. We proposed a novel PTS with best performance balancing PAPR and BER performance. Design and development of scheme is done using a graphical programming environment LabVIEW (Laboratory Virtual Instrumentation Engineering Workbench) and real time environment validation is done with software defined radio – NIUSRP2922, which is National Instruments Universal Software Radio Peripheral. The paper has three sections in first section, Introduction, the OFDM fundamentals and PAPR are defined in design perspective, in second section conventional and proposed PTS schemes have been explained. The third section consists of result and conclusion. 11 30 2019 431 435 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4179.119119 https://www.ijitee.org/portfolio-item/A4179119119/ Department of EEE, Faculty of Engineering & Technology Manav Rachna International institute of Research & Studies, Faridabad , India. Richa Khera* Anita Khosla Department of EEE, Faculty of Engineering & Technology Manav Rachna International institute of Research & Studies, Faridabad Dheeraj Joshi Department of EEE, Delhi Technological University, Delhi , India. Due to the advancement in the semiconductor technology DC-DC converters are gaining the importance in several industrial applications. They form the core of the switched mode power supplies used in real time applications. But the conventional DC -DC converter contains the voltage ripples due to the effect of the parasitic elements which is undesirable. The derived topologies of DC –DC converters from the conventional pumps eradicates this effect. In this paper the superlift LUO DC-DC converter will be presented which can replace the conventional converters. The effect of the parasitic elements is eradicated in superlift converter and range of the boosting the voltage level is high which will reduce the charging time and can be applicable for charging of o electric vehicles. The optimized proportional and integral controller using particle swarm optimization is applied to the presented converters. 11 30 2019 436 440 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4180.119119 https://www.ijitee.org/portfolio-item/A4180119119/ Naval Architecture Department, Diponegoro University, Semarang, Indonesia. Dr. Ahmad Fauzan Zakki* Aulia Windyandari Industrial Technology Department, Diponegoro University, Semarang, Indonesia. Dr. Deddy Chrismianto Naval Architecture Department, Diponegoro University, Semarang, Indonesia. Iqbal Habib Naval Architecture Department, Diponegoro University, Semarang, Indonesia. This research is focused on the development of the design and prototype of monohull fish processing vessel hullform to support fishing activities such as catching fish, collecting fish from the smaller boats and processing fish catches. The extensive on-board facilities in the fish processing vessel are maintaining the freshness of the catch and improving the quality of catch fish than traditional fishing boat. The initial stage of this study is determining the principal dimension and exploring of the configurations of monohull hull forms. Furthermore, the investigation of resistance characteristics, intact stability and seakeeping behavior was carried out using strip theory and computational fluid dynamic methods. Regarding the performance of the hulls resistance, the analysis indicates that the hull form with smaller block coefficients showed better resistance characteristics. In the case of intact stability, the results of the analysis showed that the model 2 of monohull hull form showed better intact stability characteristics compared to the other models. 11 30 2019 441 447 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4181.119119 https://www.ijitee.org/portfolio-item/A4181119119/ Assistant Professor (S.G)/ CSE Education - M.Tech. Information Technology Area – Deep Learning Angeline R* Rudra Dev Mishra Pursuing Computer Science And Engineering Srm Institue of Science And Technology Member of Lema Labs Community Lingaraj Gopalakrishnan Pursuing Computer Science And Engineering Srm Institue of Science And Technology Member of Computer Society of India. Saravanan B Pursuing Computer Science And Engineering Srm Institue of Science And Technology Member of Computer Society of India Blood is one of the main components of our body helping in some of the major functions and its presence in right quantity is very important for proper functioning. Therefore, blood need is going increasingly and in great demand because of so increase in the numbers of accidents, surgery or diseases where blood production is very less resulting in loss of blood from the victim’s body. So, it is becoming a great need to propose a system which is very much efficient and time friendly and currently proposed system of online blood donation system is not much efficient and non-real time service. We have introduced our system where hospitals can directly contact the persons who have registered themselves having blood type same as required within their local area or person can donate blood himself to the nearest blood banks and his blood type updated in along with the total quantity of blood of different types available in the different blood banks. The time requirement of the blood by the needed has been improved effectively in our system. 11 30 2019 448 452 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4183.119119 https://www.ijitee.org/portfolio-item/A4183119119/ Presently working as A.P in Electronics and Communication Engineering of Sri Eshwar College of Engineering, Coimbatore, Tamilnadu, India. K. Suganyadevi* Dr. N. Saravana Selvam Professor, Department of ECE, PSR Engineering College, Sevalpatti, Sivakasi Vehicular ad hoc networks are becoming the promising research topic in Intelligent transportation system. VANET enable the collaboration amongst multiple vehicle communication which supports by their arrangement and infrastructure for consistent data delivery services. Due to high mobility of vehicles, the data cannot be delivered between vehicles with change in their topologies and its becoming an emerging high area in the field of research. However, the ideal characteristics of vanet routing protocols make proper connectivity for reliable and effective data delivery in traffic scenarios. This article starts with traffic congestion and dissemination of the information to nearby vehicles for making smart city into a very smarter one. As a result of miscommunication between the vehicles , severe accidents happened scores of times especially in the traffic prevailing areas. In order to mitigate terrible accidents, We then focus on (traffic light aware routing protocol) TLRC with (Soft Reservation Multiple Access with Priority Assignment) SRMA/PA routing protocols at intersections and traffic light signals under traffic congestion. In Sum, this article enriches the performance of data delivery ratio and end to end delay in exchanging data between Vanet equipped vehicles. 11 30 2019 453 457 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4186.119119 https://www.ijitee.org/portfolio-item/A4186119119/ Faculty of Hospitality, Tourism & Wellness, Universiti Malaysia Kelantan, Malaysia. Roslizawati Che Aziz* Nik Alif Amri Nik Hashim Faculty of Hospitality, Tourism & Wellness, Universiti Malaysia Kelantan, Malaysia. Raja Norliana Raja Omar Faculty of Hospitality, Tourism & Wellness, Universiti Malaysia Kelantan, Malaysia. Abdullah Muhamed Yusoff Faculty of Hospitality, Tourism & Wellness, Universiti Malaysia Kelantan, Malaysia. Nur Hafizah Muhammad Faculty of Hospitality, Tourism & Wellness, Universiti Malaysia Kelantan, Malaysia. Deweanna Bah Simpong Faculty of Hospitality, Tourism & Wellness, Universiti Malaysia Kelantan, Malaysia. Tahirah Abdullah Faculty of Entrepreneurship & Business, Universiti Malaysia Kelantan, Malaysia. Siti Afiqah Zainuddin Faculty of Entrepreneurship & Business, Universiti Malaysia Kelantan, Malaysia. Fauzan Hafiz Muhammad Safri Faculty of Hospitality, Tourism & Wellness, Universiti Malaysia Kelantan, Malaysia. Recently, the market of E-Learning is soaring and is known as a new paradigm in modern education. E-Learning acts as a medium, consisting of several types of computers and electronic media that are communication tools as well as the Internet, which provides training and informative access on certain subjects. By using E-Learning students can attend online classes anywhere, regardless of time and place. Generally, E-Learning is more geared towards self-training and is ideal for individuals who work full-time but desire to further their studies. Thus, this study has been developed and integrated with factors leading towards the effectiveness of E-Learning as a tool in Teaching and Learning (T&L) approach. A quantitative approach was applied by using a self-administered distribution of questionnaire targeted at higher education students. Therefore, the outcomes of this research will help to provide insightful information to the current education system in Malaysia, particularly in crafting strategies to enhance the learning education for the country in general. 11 30 2019 458 463 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4188.119119 https://www.ijitee.org/portfolio-item/A4188119119/ (Tashkent, Uzbekistan) - Doctor of Technical Sciences, Professor, Department of general technical disciplines, Tashkent Institute of Textile and Light Industry, Tashkent city, Shohjahon Anvar Djuraevich Djuraev* Beknazarov Jasur Kholmamatovich (Navoi, Uzbekistan) doctoral student of the Navoi branch of the Academy of Sciences of the Republic of Uzbekistan Kenjaboev Shukurjon Sharipovich (Namangan, Uzbekistan) Doctor of Technical Sciences, Rector of Namangan Engineering Construction Institute The article presents the design schemes and the principle of operation of the gear transmission with composite wheels and elastic elements. The technique and the results of the analysis to determine the degree of mobility of gears with composite wheels and elastic elements are given. The angular displacement of the composite gears and gear ratios are obtained by the analytical method. Graphic dependencies are constructed and the values of the system parameters are recommended. 11 30 2019 2385 2388 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4192.119119 https://www.ijitee.org/portfolio-item/A4192119119/ Department of Electrical and Electronic Engineering, Universiti Malaysia Sarawak (UNIMAS), Jln Datuk Mohd Musa, 94300 Kota Samarahan, Sarawak, Malaysia. Chyntia Jaby ak Entuni* Tengku Mohd Afendi Zulcaffle Department of Electrical and Electronic Engineering, Universiti Malaysia Sarawak (UNIMAS), Jln Datuk Mohd Musa, 94300 Kota Samarahan, Sarawak, Malaysia. Plant leaf diseases are significant issue in agriculture field. Some of the common plant leaf diseases are powdery mildew, dark spot and rust. They are a noteworthy wellspring of an immense number of dollar worth of setbacks to farmers on a yearly premise. Plant breeders frequently need to screen countless number of plant leaves to find the stage of diseases of their crops to perform an early treatments. Therefore, a robust method for field screening is needed in order to spare the farmers and the environment as well. Inappropriate used of treatments such as impulsive pesticides can imperil the environment. Hence, this paper present a simple and efficient machine learning method which is Fuzzy C-Means algorithm to screen leaf disease severity in maize. Fuzzy C-Means is a new algorithm and very efficient to be used in object detection. Therefore, it is applicable to detect disease spot in plant leaf and measure the diseases severity. This field screening method help the farmer to identify the progression of the diseases in their crops quicker and easier than the other field screening techniques. 11 30 2019 464 467 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4193.119119 https://www.ijitee.org/portfolio-item/A4193119119/ Laboratory of Renewable Energies and Environment (LR2E), Faculty of Science, Ibn Tofail University, B.P 133-14000 Kenitra, Morocco. M. Zemamou* A. Toumi Laboratoire d’Ingénierie, Management Industriel et Innovation, University Hassan 1er Settat, Morocco. K. Mrigua Laboratory of Renewable Energies and Environment (LR2E), Faculty of Science, Ibn Tofail University, B.P 133-14000 Kenitra, Morocco. M. Aggour Laboratory of Renewable Energies and Environment (LR2E), Faculty of Science, Ibn Tofail University, B.P 133-14000 Kenitra, Morocco. In the context of worldwide energetic transition, wind energy shows up as one of the most prominent renewable energy to provide an alternative for the conventional energy source. Therefore, new technologies of a wind turbine are developed, horizontal axis wind turbines have been extensively investigated and evolved. However, the development of vertical axis wind turbines is still an open and area of research, The main objective is to develop a more efficient type of wind turbines able to operate at low wind speeds to take hold maximum wind potential, The Savonius rotor goes with such conditions, however, it faces critical drawbacks, in particular, the low performance in comparison with horizontal axis wind turbines, as well, the blade in return of savonius wind turbine generates a negative torque leading to a decrement of turbine performance. The present work aims to investigate a modified model of the conventional Savonius rotors with a focus on improving the coefficient of power, transient computational fluid dynamics (CFD) simulations are carried out in an effort to perform a validation of numerical results according to experimental data, also to conduct a comparative analysis of both savonius models. 11 30 2019 1432 1437 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4202.119119 https://www.ijitee.org/portfolio-item/A4202119119/ Research Scholar (Part-Time), Yogi Vemana University, YSR Kadapa-516005. Shaik Abdul Mazeed* Dr. P. Sai Rani Professor and Head of the Department – Finance, ICBM – SBE, Hyderabad R. Raveendranath Associate Professor, Dr. K V Subba Reddy School of Business Management, Kurnool P. Divya Assistant Professor, TKR Institute of Management and Science, Hyderabad Telugu Sudharani Assistant Professor, Dr. K V Subba Reddy School of Business Management, Kurnool Every company needs money or capital not only for its establishment but also for day to day operations. In order to acquire the money or capital a company will have its own variety sources that can be elucidated by capital structure. There are two ways or sources for financing a firm i.e. debt finance and equity finance also known as debt and equity capital. Debt Capital comes from bonds, debentures, long term notes payable etc. whereas equity capital comes from stock/shares may be equity or preference, retained earnings etc. Working capital is also a part of capital structure. Each category has its own pros and cons. Decisions related to finance is the integral element of any company. In this connection, the finance manager plays a vital role in arriving at a decision. He is always in dilemma that which proportion of capital leads to optimum utilization of funds. The widely accepted solution is a combination of equity capital and debt capital. Generally capital structure is formulated as per the interest of equity share holders. Hence rather than collecting funds totally from share holders, it is better to have a long term loan also, even though it is an expense to the company, this method is followed by many companies. This research paper primarily focuses on effectiveness of capital structure on profitability of Information Technology (IT) firms in India. 11 30 2019 726 728 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4204.119119 https://www.ijitee.org/portfolio-item/A4204119119/ Stavropol Institute of Cooperation (branch) of Belgorod University of Cooperation, Economics & Law, Stavropol, Russia. Viktor Glaz* Yuliya Glaz Stavropol Institute of Cooperation (branch) of Belgorod University of Cooperation, Economics & Law, Stavropol, Russia. Aleksander Zbritskiy National Research University, Higher school of Economics, Moscow, Russia. Tatiana Ivchik National Research University, Higher school of Economics, Moscow, Russia. Alexey Tolmachev Kuban State Agrarian University named after I.T. Trubilin, Krasnodar, Russia. This article presents the results of the development of scientifically based mechanisms for the adaptation of Russian organizations to the conditions of the global market economy. The basis for this was the study of the management system, its organizational structures, mechanisms that ensure a balanced management system and meet modern market requirements. In this regard, one of the important factors, or rather, one of the fundamental conditions, is the formation of a qualitatively new mobile management system that adequately responds to external and internal changes, forming new forms of managerial decisions and well-reasoned plans for their implementation.. 11 30 2019 468 472 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4212.119119 https://www.ijitee.org/portfolio-item/A4212119119/ Associate Professor, Dept of E&CE, KBN College of Engineering, Kalaburagi. Shabana Tabassum* Dr. SanjayKumar C. Gowre Professor, Dept of E&CE, BKIT, Bhalki. A color image is captured though the single image sensor and it is named as the mosaicked image and this is obtained through the CFA where the pixels are arranged such that any one of the color from the given color component is recorded at every pixel. De-mosaicingis absolute reverse of mosaicking, where the process is to reconstruct the full color image from the given incomplete color samples. In past several methods of de-mosaicing have been proposed however, they have many shortcomings such as computational complexity and high computational load, not matching the original images. Hence we have proposed a methodology named as MFIT i.e. Matrix factorization Iterative Tunable approach, the main aim of this methodology is to improvise the reconstruction quality. In order to achieve the better reconstruction quality we have used the MFIT algorithm at each iteration this helps in avoiding the image artifacts and it is achieved through the image block adjustment also it reduces the computational load. Moreover in order to evaluate the proposed algorithm we have compared it with nearly 12 algorithm based on the value of PSNR and SSIM, the theoretical results and comparative analysis shows that our algorithm excels compared to the other existing method of de-mosaicing. 11 30 2019 473 480 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4213.119119 https://www.ijitee.org/portfolio-item/A4213119119/ Pusat Citra, Universiti Kebangsaan Malaysia, Malaysia. Zulkifli Mohamad* Nazri Muslim Pusat Citra Universiti Kebangsaan Malaysia, Malaysia. Wan Zulkifli Wan Hassan Pusat Citra, Universiti Kebangsaan Malaysia, Malaysia. Azizi Umar Pusat Citra, Universiti Kebangsaan Malaysia, Malaysia. Maharam Mamat Pusat Citra, Universiti Kebangsaan Malaysia, Malaysia. At the time the country gained independence, most Malays were still living in traditional village and in poverty. In order to overcome this problem, the government had introduced a form of well-planned migration. This migration was established with specific goals such as offering land to people without one, eradicating poverty, eliminating communist’s hide-outs and boosting country’s economic growth. By allocating some amount of fund, the government cleared-up forest land and provided basic facilities such as houses, roads, worshipping places and schools. This well-planned migration was top-down, locating only qualified migrants through process of interview. In order for this migration to be successful, the government introduced the motto best land for the best people. The first settlement of this agricultural migration is in Lurah Bilut, Bentong Pahang. A total of 616 migrants of all races and religions, from all over the country were located in FELDA of Lurah Bilut. The programme was then expanded to the whole country following its success. After 50 years of operation, there are now 317 settlements, dwelt by 112,653 families. FELDA agricultural migration programme is the only well-planned and most successful in the world. Currently, in average, participants of settlement enjoy higher standard of living than before, whereas their children benefit from highest education standard. 11 30 2019 729 736 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4214.119119 https://www.ijitee.org/portfolio-item/A4214119119/ School of Arts, Science and Humanities, SASTRA Deemed to be University, Thanjavur-613401 TN, India. V. Yegnanarayanan* S.B. Pravallika School of Computing, SASTRA Deemed to be University,Thanjavur-613401,TN, India. In the task of structural identification of a network a vital tool is the underlying spectrum associated with the normalized graph Laplacian. To comprehend such spectrum, we need to determine the eigenvalues. In this paper we have found certain useful bounds involving the eigenvalues of both combinatorial Laplacian and normalized Laplacian and applied the same on a collaboration graph obtained from a social network. 11 30 2019 2075 2081 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4217.119119 https://www.ijitee.org/portfolio-item/A4217119119/ Research Scholar, Computer Science and Engineering, Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Avadi, Chennai, TamilNadu, India. Kota Venkateswara Rao* M. Shyamala Devi Associate Professor, Computer Science and Engineering, Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Avadi, Chennai, TamilNadu, India. With the rapid growth in technology, analysis of feedback and reviews by the customers in companies and industries becomes a major challenge. The profit of the company mainly depends on the customer satisfaction. The view of the customer can be analyzed only through feedback. The review analysis can be utilized for the prediction of current sales and future sales of the company. With this overview, the paper aims in performing the sentiment analysis of the movie review. The Type of comment given by the customer is predicted and categorized into classes. The sentiment Analysis on movie Review dataset taken from the KAGGLE leading Dataset repository is used for implementation. The categorization of sentiment classes is achieved in five categories. Firstly, the target count for each sentiment is portrayed. The Resampling is done for equalizing the target sentiment count. Secondly, the extraction of sentiment feature words for each target is displayed and the data cleaning is done with Term Frequency Inverse document Frequency method. Thirdly, the resampled dataset is then fitted with the various classifiers like Multinomial Naives Bayes Classifier, Logistic Regression Classifier, KNearest Neighbors Classifier, Bernoulli Naives Bayes Classifier, Complement Naives Bayes Classifier, Nearest Centroid Classifer, Passive Aggressive Classifier, SGD Classifier, Ridge Classifier, Perceptron Classifier. Fourth, the feature extraction is done with Hashing Vectorizer and Counting Vectorizer. The vocabulary features are also displayed from the dataset. Fifth, the Performance analysis of clasifier is done with metrics like Accuracy, Recall, FScore and Precision. The implementation is carried out using python code in Spyder Anaconda Navigator IP Console. Experimental results shows that the sentiment prediction and classification done by Ridge classifier is found to be effective with Precision of 0.89, Recall of 0.88, FScore of 0.87 and Accuracy of 89%. 11 30 2019 737 743 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4220.119119 https://www.ijitee.org/portfolio-item/A4220119119/ Research Scholar, Vels University, Chennai, Tamilnadu, India. P. Sunitha* Dr. K.L. Shunmuganathan Principal, Aarupadai Veedu Institute of Technology, Chennai, Tamilnadu, India. Due to the universal use of IEEE 802.11 – based networks, the systematic positioned of Wireless Local Area Networks (WLANs) come to be a Challenge. With the intense admiration and stationed of WLANs, well organized administration of wireless bandwidth is elegantly a major progressive. The advanced techniques upgrade the utilization of wireless bandwidth in the factors of wireless local area networks (WLANs) employing advanced channel allocation techniques between Interfering Access Points (Aps). This work formalizes the channel assignment as a multiagent hampering optimization problem in a multi agent environment and intend a latest collective medium assignment procedure called Extended Distributed Suboptimal Channel Assignment (EDSCA), which utilizes Distributed Pseudo tree optimization (DPOP). 11 30 2019 1438 1441 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4223.119119 https://www.ijitee.org/portfolio-item/A4223119119/ PG Scholar, Department of ECE, VelTech Rangarajan Dr.Sagunthala R&D Institute of Science and Technology, Chennai, India. Shaher Dwik* Natarajan Somasundaram Department of ECE, VelTech Rangarajan Dr.Sagunthala R&D Institute of Science and Technology, Chennai, India. This paper presents Modeling and Simulation of Two-Dimensional Position Sensitive Detector (PSD) using MATLAB. PSD is an Optical Position Sensor (OPS) that can measure a position of a radiation spot in one or two-dimensions on a sensor surface. Unlike discrete elements such as Charge-Coupled Device (CCD), it provides continuous position data, features high position resolution and high-speed response which give this paper its importance. The sensor used consists of two-dimensional array of photodiodes. The sensor has four output photocurrents that change according to the position of incident radiation on the surface. The work is divided into three parts of Modeling and Simulation; the first part is a single photodiode, Second part is one-dimensional array of photodiodes and the third one is two-dimensional array of photodiodes. The tool used to do the simulation is MATLAB software because it is professional and accurate tool, it has photodiode element and it is possible to control the beam of incident light. This research can be useful for Acquisition; Pointing and Tracking (APT) systems where this sensor will give the necessary data to do tracking operation. Proteus software was also been used as a secondary tool. 11 30 2019 744 753 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4226.119119 https://www.ijitee.org/portfolio-item/A4226119119/ Faculty of Economics and Muamalat (FEM), Universiti Sains Islam Malaysia (USIM), Malaysia. Syaromi Ramli* Zainal Abidin Mohamed Faculty of Economics and Muamalat (FEM), Universiti Sains Islam Malaysia (USIM), Malaysia. Expressways are extremely expensive to build and maintain. A major infrastructure project and services involve massive public investments starting from planning, land acquisition, grading, paving and other expenditure. As an alternative, Public Private Partnership (PPP) is a popular tool for the government to cope and meet the increasingly demand by capitalising on private sectors ‘resource and expertise. Given the inherent advantages of PPP model over conventional model, the PPP model was highly favoured and adopted for toll expressway development in Malaysia. Many studies have been made on PPP in the literature but very few have been conducted to investigate factors affecting adoption of PPP toll expressway in Malaysia. Thus, this paper attempts to register all these Critical Success Factors (CSFs) from available journal articles published since 2012. Twenty (20) articles were identified and all the CSFs in them were registered in one list. A two stage exploratory sequential mixed method design was adopted. The first stage was to list all the 161 CSFs that illustrated in the articles and qualitatively analysed them (using thematic analysis) and this resulted in reducing the number to 77. Then these 77 themes of CSFs went through of consolidating exercise into grouping them under the relevant Clusters. Overall, there are nine (9) clusters of criteria of CSFs that can be consolidated as factors affecting on adoption of PPP namely;(1) risks cluster, (2) governmental influence cluster, (3)project viability cluster, (4)organisational cluster, (5)economic and financial cluster, (6)legal framework cluster, (7)technology and innovation cluster, (8) social and environment cluster, and (9) trust cluster. The consolidated nine (9) clusters of CSFs list then went through a final stage of analysis for validation. A set of questionnaire to validate the degree of importance of these nine (9) clusters of factor affecting was prepared and sent to thirty (30) experts in PPP from three (3) main sectors; public, private and academic. The descriptive analysis was done by using Statistical Package for Social Sciences (SPSS) Version 23.0 to differentiate these nine (9) clusters of factor affecting through their mean score. Finally, based on the group mean score value higher than 3.95, three (3) clusters of CSFs were selected as the most factor affecting in adoption of PPP namely; governmental influence, project viability and trust. This list is recommended to be considered in future studies of the influencing factors of involvement private sectors into PPP particularly on expressway projects. 11 30 2019 2082 2087 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4230.119119 https://www.ijitee.org/portfolio-item/A4230119119/ Faculty-Department of Mechanical Engineering, Sri Sai Ram Engineering College, Chennai, India. D. Prabu* A. Giriprasath Sri Manakula Vinayagar Engineering College, Puducherry, India. V. Prasanna UG Student- Department of Mechanical Engineering, Sri Sai Ram Engineering College, Chennai, India. G. Mohanakrishnan UG Student- Department of Mechanical Engineering, Sri Sai Ram Engineering College, Chennai, India. S. Viknesh UG Student- Department of Mechanical Engineering, Sri Sai Ram Engineering College, Chennai, India. In general the natural fibers are taken out from the sources of animals and plants. In recent days the natural fibers play an important role in engineering applications like automotive, aerospace and marine industries due to abundant availability, less in cost and zero percentage environment harmless in nature. In this paper the investigation of various mechanical properties of hybrid reinforced composite (Palm fiber Basalt S-glass fiber) is been done on the fabricated samples. The different mechanical property includes tensile, hardness and impact tests etc... The fabrication comprises three layers of Palm and Basalt fibers outer laminated by two layers of S-glass fibers using injection molding method. From the various testing and investigation against the test sample it is been concluded that the fibers in the hybrid set took a major role in determining the important mechanical properties. Thus the fibers present in the hybrid composite increases the strength, stiffness and weight ratio of the composite materials. The various forms and structural analysis of the hybrid composite material are processed by using scanning electron microscope for attaining the better results and application basis. 11 30 2019 1064 1070 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4231.119119 https://www.ijitee.org/portfolio-item/A4231119119/ Associate Professor, Mechanical Engg. Deptt. VCE, Rohtak, Haryana, India. Mr. Mohit Kumar Agrawal* Dr. Vineet Kumar Dean (Faculty of Engineering & Technology, MDU, Rohtak) , Professor, Mechanical, UIET, MDU, Rohtak, Haryana, India. In the present research investigation, ductile iron castings conforming to IS500/7 grade casting were produced using green sand moulds. The castings were produced in a regular production foundry using 1.25T Induction Furnace. The molten metal was subjected to standard desulphurisation and modularisation to get graphite in the nodular form. Based on the earlier investigation by the above group the castings were austenitised at 900oC for 120minutes and quenched in a salt bath consisting of potassium nitrate and sodium nitratein the ratio of 55:45 and maintained at 310oC for 120 minutes to bring about austempering treatment. The result in austempered ductile iron will consist of graphite nodules in a matrix of bainite[1,2]. The effect of austempering heat treatment on microstructure, mechanical properties[13,14] andwear characteristics were studied and compared with the as-cast condition. Mechanical properties such as ultimate tensile strength, % elongation, hardness and impact strength were determined. Wear tests were carried out to determine the weight loss of specimens; using pin on disc type machine. Wear test was held for different loads viz. 300 gm, 400 gm and 500 gm and different speeds conditions viz. 950 r.p.m, 1430 r.p.m and 2130 r.p.m. Corrosion tests were carried out to determine corrosion rate at different viz. 35°C & 45°C temperature for increasing duration viz. 2 hours to 24 hours. The results of the research investigation indicate that the heat treated castings shows higher Ultimate Tensile Setength values (54.86% increase), elongation values (64.32% increase) and Brinell hardness values (19.03% increases) as compared to the ascast condition of casting. From the dry sliding wear studies, it is seen that heat treated specimen’s shows higher resistance to wear compared to the ascast specimens and corrosion rate & weight loss due to corrosion in heat treated condition is less compared to ascast ones. 11 30 2019 754 760 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4234.119119 https://www.ijitee.org/portfolio-item/A4234119119/ Information System Management, Bina Nusantara, Jakarta, Indonesia. Agustina Ampuni* Adi Fitrianto Information System Management, Bina Nusantara, Jakarta, Indonesia. Renaldy Indrajaya Information System Management, Bina Nusantara, Jakarta, Indonesia. In digital era, Indonesia as democratic country needs to implement e-voting for presidential and governor election. Some countries have implement e-voting and two of them are more populated than Indonesia. E-voting can make voting process and vote distribution better. In this paper we proposed IT infrastructure for e-voting using load balancing, cryptography, and block chain. Also this proposed model can be discussed further about application and system replication to produce similar data from all servers. 11 30 2019 761 763 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4235.119119 https://www.ijitee.org/portfolio-item/A4235119119/ Faculty of Operations & IT ICFAI Business School (IBS), Hyderabad, India. D. Saravanan* Text data retrieval is one of the major domain for extracting knowledge from the stored data sets. Within the text information, the text meaningful numerical codes extracted unstructured process information is to make the free text associated with the unstructured nature of data mining in a different stream. Number of procedure is constructed to Performing this operations most effectively. This paper focuses one of the text retrieval process, experimental results verified proposed methods works well with most of the documents. 11 30 2019 1442 1445 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4236.119119 https://www.ijitee.org/portfolio-item/A4236119119/ Research Scholar, Department of Computer Science, Mother Teresa Women’s University, Kodaikanal, Tamilnadu, India. S. Rajathilagam* Dr.K. Kavitha Assistant Professor, Department of Computer Science, Mother Teresa Women’s University, Kodaikanal, Tamilnadu, India. Crowdsourcing refers to decomposing complex jobs to multiple tasks and solve those task with multiple workers through open call in distributed networking environment. The recruitment of employees for organization has undergone transformation from traditional method to digital domain. Online recruitment facilitates just-in-time hiring to requesters and enables the workers to compete in the global market. This paper proposed an Efficient Machine Learning Crowdsourced(EMLC) method for E-recruitment which uses Crowdsourcing method to collect resumes from the workers and details of work from the requesters. The data is collected from a private job agency through an online recruitment portal which consist of recruiters from companies and job seekers based on qualifications and experience related to their field. The data collected from recruitment portal is analyzed with Machine Learning Approach with decision tree algorithms like ID3, CART and C4.5 for better selection of efficient person to complete the job. Various performance metrics such as Accuracy, Error rate, Recall etc were used to the Crowdsourced Database to categorize the job seekers efficiently. The proposed method gives better result for online recruiting through Crowdsourcing. 11 30 2019 2389 2394 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4238.119119 https://www.ijitee.org/portfolio-item/A4238119119/ Research Scholar, Amity Institute of Information Technology, Amity University Uttar Pradesh, Lucknow, India Narendra Kumar Sharma* Dr. Shahnaz Fatima Amity Institute of Information Technology, Amity University Uttar Pradesh, Lucknow, India Dr. Swati Saxena Dept. of Computer Application, Maharana Pratap Engineering College, Kanpur, Uttar Pradesh, India Healthcare is the right of every human being but shortage of medical professional, healthcare institutions and use of modern information technology, it is not possible to provide high-quality healthcare services to facilitate them. In the developing country like India greater part of peoples are living in rural areas and face principal disaster due to insufficiency of ideal healthcare institutions as well as medical professionals. The rural clinical health centre might also have medicines to grant first aid, but may not have the expertise. People of India in rural areas have to journey long distances to access suitable healthcare which can be the difference between life and death in the case of emergency. It shows that the immense gap between doctor and patient or people and health care system. We attempt to fulfill that gap and proposed a healthcare model to improve healthcare quality and take effective decisions. The proposed healthcare model will capable to take effective decisions for health related issues specially for people of rural India. 11 30 2019 764 767 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4241.119119 https://www.ijitee.org/portfolio-item/A4241119119/ School of Computing Science and Engineering, Vellore Institute of Technology, Vellore, India Jacob John* Mariam Sunil Varkey School of Computing Science and Engineering, Vellore Institute of Technology, Vellore, India Selvi M School of Computing Science and Engineering, Vellore Institute of Technology, Vellore, India The internet exists as a global interconnection network for information sharing, commerce, and entertainment. The usage of internet has grown tremendously over the past decade in the field of E- health care monitoring system. In E- health care monitoring systems, Smart Wireless Body Area Networks (S-WBANs) is one among such technologies and is being explored. S-WBANs are primarily used as a smart object with computer-assisted rehabilitation. They serve as a remote monitoring service in smart electronic healthcare to continuously measure the vital parameters like heart rate, insulin level, body temperature, etc. They are thereby providing doctors with early detection of a patient’s medical conditions. However, sharing of sensitive personal data over a wireless network requires a high level of security. Since any breach in the system security will lead to a direct violation of the patient’s privacy. In order to address the security vulnerability of the existing system, in this paper a block chain based Smart Wireless Body Area Networks has been proposed to provide better security with enhanced privacy and access control for E- health care monitoring system. Moreover, the proposed system enhances the scalability and provides mitigation against all the security attacks in IoT Environment. 11 30 2019 2088 2097 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4242.119119 https://www.ijitee.org/portfolio-item/A4242119119/ Leader Researcher of Federal State Institution “Federal Scientific Center Research Institute of System Researches”, Moscow, Russian, Nikolae V. Masalsky* To solve the problems of high temperature microelectronics the influence of the self heating effect on the I-V dates partially depleted submicron silicon–on-insulator CMOS transistor in the ambient temperature range from 525 K to 650 K is discussed. Approach consists in combination of experimental data and of computational simulating results. For simulation of electrothermal characteristics of SOI CMOS transistor is considered three-layered structure. Temperature distribution is calculated numerically using iterative algorithm in conjunction with software COMSOL Multiphysics. I-V dates of SOI CMOS transistors are calculated by means of two-dimensional models for n-and p-channel transistors of Sentaurus TCAD developed in the system of instrument and technological modelling. TCAD models are calibrated on experimental characteristics for 525 K. It is shown that with growth of ambient temperature the self-heating mechanism contribution consistently decreases. By results of modeling it is established that self-heating contributions at supply voltages 5.5 V to decreases for n-transistor in 2.8 times, p-transistor in 2.2 times. The relative decline of current n-type transistor for reduced from 11.6% to 5.5% and for p-type with 15% to 9%. However, different dynamics of current recession for n-and p-transistors is significant for analog applications that need to be considered at high-temperature circuit design. The proposed methodology allows to critically assess the contribution of the self-heating mechanism on the I-V dates for a wide range of high temperatures and supply voltages. Underestimating this fact leads to unreasonable values for the maximum temperature and limit of thermal stability for the separate SOI CMOS transistor. In total this can be a prerequisite for a significant simplification of the design of not only the chip construction but also the whole electronic Board. 11 30 2019 1446 1450 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4244.119119 https://www.ijitee.org/portfolio-item/A4244119119/ Perusing Computer Science and Engineering in SRM Institute of Science And Technology located in Chennai, Tamil Nadu, India. D. Dakshin* V. R. Rupesh Perusing Computer Science and Engineering in SRM Institute Of Science And Technology located in Chennai, Tamil Nadu, India. S. Praveen Kumar Perusing, Computer Science and Engineering in SRM Institute Of Science And Technology located in Chennai, Tamil Nadu, India. Water is the most essential need of all life forms. This essential need can also create hazards to us which comes in the form of water hazards (flood and drought). Catastrophic events, for example, flood is respected to be brought about by outrageous climate conditions just as changes in worldwide and territorial atmosphere. If precautions are not taken beforehand it becomes more and more difficult to control when it occurs. This study aimed to forecast both flood and drought using Machine Learning (ML). So as to have a clear and precise forecast of flood and drought hazard is fundamental to play out a specific and multivariate analysis among the various kinds of data sets. Multi variate Analysis means that all measurable strategies will concurrently analyses manifold variables. Among multi variate investigation, ML will give expanding levels of exactness, accuracy, and productivity by finding designs in enormous and variegated data sets. Basically, ML methods naturally acquires proficiency data from dataset. This is finished by the way toward learning, by which the calculation can sum up past the models given via preparing information in info. AI is intriguing for forecasts since it adjusts the goal methodologies to the highlights of the data set. This uniqueness can be utilized to foresee outrageous from high factor information, as on account of the risks. This paper proposes systems and contextual analysis on the application on ML calculations on water hazard occurrence forecast. Especially the examination will concentrate on the utilization of Support Vector Machines and Artificial Neural Networks on a multivariate arrangement of information identified with water level of lakes in and around Chennai and measurement of rainfall in the lakes. 11 30 2019 1451 1457 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4245.119119 https://www.ijitee.org/portfolio-item/A4245119119/ Department of Computer Technology, Yaba College of Technology, Lagos, Nigeria. Adigun J. O * Okikiola F. M. Department of Computer Technology, Yaba College of Technology, Lagos, Nigeria. Aigbokhan E. E. Department of Computer Technology, Yaba College of Technology, Lagos, Nigeria. Rufai M. M. Department of Computer Technology, Yaba College of Technology, Lagos, Nigeria. Fruit grading is a process that affect quality control and fruit-processing industries to meet the efficiency of its production and society. However, these industries have suffered from lack of standards in quality control, higher time of grading and low product output because of the use of manual methods. To meet the increasing demand of quality fruit products, fruit-processing industries must consider automating their fruit grading process. Several algorithms have been proposed over the years to achieve this purpose and their works were based on color, shape and inability to handle large dataset which resulted in slow recognition accuracy. To mitigate these flaws, we develop an automated system for grading and classification of apple using Convolutional Neural Network (CNN) used in image recognition and classification. Two models were developed from CNN using ResNet50 as its convolutional base, a process called transfer learning. The first model, the apple checker model (ACM) performs the recognition of the image with two output connections (apple and non-apple) while the apple grader model (AGM) does the classification of the image that has four output classes (spoiled, grade A, grade B & grade C) if the image is an apple. A comparison evaluation of both models were conducted and experimental results show that the ACM achieved a test accuracy of 100% while the AGM obtained recognition rate of 99.89%.The developed system may be employed in food processing industries and related life applications. 11 30 2019 1458 1464 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4246.119119 https://www.ijitee.org/portfolio-item/A4246119119/ Computer Science Department, BINUS Graduate Program – Master of Computer Science, Bina Nusantara University, Jakarta, Indonesia Abba Suganda Girsang* Sani Muhamad Isa Computer Science Department, BINUS Graduate Program – Master of Computer Science, Bina Nusantara University, Jakarta, Indonesia Ikrar Harvy Computer Science Department, BINUS Graduate Program – Master of Computer Science, Bina Nusantara University, Jakarta, Indonesia Journalists have some responsibility as their duty. Besides delivering the right news to public, they also have to deliver fast. Therefore getting the potential news fast is one important key for journalist.. This study tries to use the information public from social media tweeter. Social media is considered as public information which every people can be involved. This system, starts collecting tweets which mention formal tweeter media. The application will group each tweets into various themes based on the cosine similarity. If cosine similarity is big, it can be indicated as one group news. .The tweets which are more than the certain threshold, it can be indicated as the candidate news. This candidate news is then classified into one of ten categories using support vector machine (SVM). This classification has 85% accuracy. The category classified is used for assigning the specific journalist to cover this candidate news. This system has two important modules. One in center server which is responsible for collecting and processing data, the other one application mobile which is installed in journalist is called Journes. The results show the Journes give notification to journalist for getting some candidate news. 11 30 2019 2480 2485 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4248.119119 https://www.ijitee.org/portfolio-item/A4248119119/ head of the Department of Pedagogy and psychology, National University of Uzbekistan named after Mirzo Ulugbek, Tashkent, Uzbekistan. Dr. Askarov Abror Davlatmirzayevich* In the period of globalization new requirements of the level of teachers’ preparation for their pedagogical career have significantly increased. Consequently, it demands higher educational institutions the necessity to draw special attention to enhance the efficiency of educational processes in preparing future teachers. In this article, the mechanism of implementation monitoring processes on improvement of the system of preparation teachers for pedagogical career in the high educational institutions has revealed. In this monitoring the distributional parameters of the corresponding processes according to the direction has taken into consideration and provided prognoses of them on the basis of interrelation and impact between indicators. On this purpose, the algorithmic model of interrelations between indicators of argumentative, procedural and productive directions of a process has developed. This model gives the chance to obtain the predicted information on educational process based on certain evidence, to define necessary organizational and pedagogical measures by comparison with the expected results, corrections, specifications and modernizations of teaching and learning processes. 11 30 2019 768 774 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4249.119119 https://www.ijitee.org/portfolio-item/A4249119119/ Assistant Professor, Department of Computer Science and Engineering, Srmist, Ramapuram, Chennai, India. M.S Minu* Kamagiri Mounika Department of Computer Science and Engineering, Srmist, Ramapuram, Chennai, India. N. Suhasini Department Of Computer Science And Engineering, Srmist, Ramapuram, Chennai, India. Bezawada Tejaswi Department of Computer Science And Engineering, Srmist, Ramapuram, Chennai, India. With more customers utilizing on the online review surveys to educate their administration basic leadership, assessment of reviews which economically affect the reality of organizations. Obviously, crafty people or gatherings have endeavored to manhandle or control online review spam to make benefits, etc, and that tricky recognition and counterfeit sentiment surveys is a subject of continuous research intrigue. In this paper, we clarify how supervised learning strategies are utilized to recognize online spam review surveys, preceding showing its utility utilizing an informational index of lodging reviews. 11 30 2019 2395 2400 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4252.119119 https://www.ijitee.org/portfolio-item/A4252119119/ Assistant Professor, Department of Applied Science & Humanities, I.T.S. Engineering College, Greater Noida, U.P., India. Renu Chaudhary* Swarg Deep Sharma Assistant Professor, Department of Mathematics, Nand Lal Singh College Jaitpur Daudpur Constituent of Jai Prakash University Chhapra, Bihar, India Nigam Kumar Assistant Professor, Department of Applied Science & Humanities, G.L. Bajaj Institute of Technology & Management, Greater Noida, U.P., India. Sudhanshu Aggarwal Assistant Professor, Department of Mathematics, National P.G. College, Barhalganj, Gorakhpur, U.P., India. Integral transforms are the most useful techniques of the mathematics which are used to finding the solution of heat transfer problems, mixing problems, electrical networks, bending of beams, signal processing problems, which generally appears in the various disciplines of engineering and sciences. In this research paper, connections between Aboodh transform and some effective integral transforms (Laplace transform, Kamal transform, Elzaki transform, Sumudu transform, Mahgoub transform, Mohand transform and Sawi transform) are discussed and integral transforms of some typical functions are given in table form in application section to signify the fruitfulness of connections between Aboodh transform and some effective mention integral transforms. 11 30 2019 1465 1470 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4262.119119 https://www.ijitee.org/portfolio-item/A4262119119/