-74813b3e17f460286df2963 20220713073609717 beie:beie director@blueeyesintelligence.org WEB-FORM International Journal of Innovative Technology and Exploring Engineering IJITEE 22783075 10.35940/ijitee https://www.ijitee.org/ 11 30 2019 9 1 ECE Dept, Karunya Institute of Technology and Sciences, Deemed to be university, Coimbatore, India. S. Merlin Gilbert Raj* Shine Let G ECE Dept, Karunya Institute of Technology and Sciences, Deemed to be university, Coimbatore, India.. Merlin Sajini M L EEE Dept, Coimbatore Institute of Technology, Coimbatore, India Paul Abraham EEE Dept, Coimbatore Institute of Technology, Coimbatore, India. Due to the development of road infrastructure and business trade, transportation of goods is increasing day-by-day. Each vehicle has its own configuration, size, power and capacity. However, heavy vehicles are often used to carry loads beyond their capacity. Therefore overloading is one of the major problems which affect truckers as well as other motorists and pedestrians going near-by. In order to provide a convenient solution to this problem, a web-based tracking system is proposed. A heavy duty vehicle which is overloaded and moving at high speed may cause the vehicle to loose balance while making turns along the roads. This problem may also cause the tire to burst, which in turn makes it difficult to control the vehicle. Communication module is interfaced with a microcontroller which takes data from global positioning system receiver to locate the current position of the overloaded vehicle. This unit is majorly controlled by an electronic control unit. A sensing element is placed at the axle point of the vehicle to concentrate on the total weight of the vehicle. A software study is done to extract the global positioning system data from GPRMC format. The proposed system is simulated and tested for semi-real data. The received data is transmitted to the control room user for further improvement in traffic regulation and road safety. 11 30 2019 4223 4230 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A7118.119119 https://www.ijitee.org/portfolio-item/A7118119119/ Scholar, MM Institute of Computer Technology & Business Management (MCA), Research Scholar, University School of Engineering & Technology Rayat Bahra University, Sahibzada Ajit Singh Nagar, Punjab, India. Cyrus Mehra* Arvind K. Sharma Assistant Professor, MM Institute of Computer Technology & Business Management (MCA) Rayat Bahra University, Sahibzada Ajit Singh Nagar, Punjab, India. Avinash Sharma Professor, MM Engineering College (MMEC) MM(DU), Mullana, Ambala, Haryana, India. Attack Detection and Prevention services or activities has distinct significance in the subdomains like ‘Computer-Security’ and ‘Internet-Security’ of Networking as compare to other activities of the same area. Major issues arise when resources get compromised with the unauthorized user(s) having adverse effects afterward. Even though much standard security mechanism like IDS, Cryptographic Techniques available to provide security & authenticity still some attacks are un-detectable like Ransomware which force security providing agencies to take initiative in this direction with proper conceptions. 11 30 2019 3536 3541 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A8106.119119 https://www.ijitee.org/portfolio-item/A8106119119/ Assistant Professor, MM Institute of Computer Technology & Business Management (MCA) Arvind K. Sharma* Avinash Sharma Professor, MM Engineering College (MMEC) Maharishi Markandeshwar (Deemed to be University), Mullana, Ambala Sagar Kumar Scholar, MM Institute of Computer Technology & Business Management (MCA) Divya Jain Assistant Professor, MM Institute of Computer Technology & Business Management (MCA) Sumit Mittal Professor, MM Institute of Computer Technology & Business Management (MCA) Conferences are conducted in academics, corporates to enhance the knowledge, specifically in academics of faculties, students and research scholars. conventional manner from educating, similar allocution, research workshops & assignments need to be complemented to form these academic proposals attractive & to covering present scholar's need. Planning a conference is a costly and demand huge number of tasks, we use function analysis to create or have a good understanding or background for conference planning. i.e. to plan national/international conference & acquirement lessons studied, & cavort an important aspect in the improvement and employment. Using an adviser has various advantages such as reducing errors that that can disturb the good smooth running for a conference. An integrated logistic approach focuses only on the participants is key for success. Supporting form of apprenticeship, like conference enable scholars to study about newest technology, appliance, process & clarification use & expanse on market. furthermore, such conferences provide scholar/attendees to evolve soft-techniques, provide new special connection & know how to collaborate with guest. All those aspects make possible especially for scholars to orient themselves in the possibilities of study and work ahead in industry or abroad. 11 30 2019 4542 4549 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.B6204.119119 https://www.ijitee.org/portfolio-item/B6204129219/ Assistant Professor, Sathyabama Institute of Science and Technology, Chennai, Tamil Nadu, India. Ms. Keerthi Samhitha* Ms. Suja Cherukulapurath Mana Assistant Professor, Sathyabama Institute of Science and Technology, Chennai, Tamil Nadu, India. Ms. Jithina Jose Assistant Professor, Sathyabama Institute of Science and Technology, Chennai, Tamil Nadu, India. Mr. Mohith Undergraduate Student, School of computing, Sathyabama Institute of Science and Technology, Chennai, Tamil Nadu, India. Mr. Siva Chandrahasa Reddy Undergraduate Student, School of computing, Sathyabama Institute of Science and Technology, Chennai, Tamil Nadu, India. Vehicular Ad Hoc Networks (VANET) are useful in implementing a smart transportation system by enabling ad hoc vehicle to vehicle communication. Sybil attack is considered to be one of the most dangerous threats to VANET. Sybil aggressor can produce different phony personalities with false messages to extremely hinder the ordinary elements of wellbeing related applications. In this paper, we are presenting an implementation of a method to detect Sybil attack using received signal strength indicator. 11 30 2019 2796 2800 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.I7604.119119 https://www.ijitee.org/portfolio-item/I7604078919/ Department of information Science and Engineering, M S Ramaiah Institute of Technology, Bengaluru, India. Manasa Ungrapalli N S* Myna A N Department of information Science and Engineering, M S Ramaiah Institute of Technology, Bengaluru, India. Classification of Pap smear images for cervical cancer consists of two types namely, normal and abnormal cancerous cells. The dataset involves 7 sets of classes of cancerous images which have 3 sets of normal cancerous images and 4 sets of abnormal cancerous images. The proposed work performs two stages of classification. The first stage of the work is classifying the data as normal or abnormal cancerous cells. In the second stage of the work, the class of the cancer as normal columnar, normal intermediate, normal superficial, light dysplasia, moderate dysplasia, severe dysplasia and carcinoma_in_situ are classified. The proposed work gives good results for classifying images for 3 sets of classes and 4 sets of classes for normal cells and is able to classify and detect normal and abnormal cell accurately. 11 30 2019 2801 2807 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.J1226.119119 https://www.ijitee.org/portfolio-item/J12260881019/ School of Engineering and IT, Manipal Academy of Higher Education, Dubai Campus, UAE. Sampath Suranjan* Jason Valladares School of Engineering and IT, Manipal Academy of Higher Education, Dubai Campus, UAE. Carsan Mario Pereira School of Engineering and IT, Manipal Academy of Higher Education, Dubai Campus, UAE. Achyut Shaju Sreedharan School of Engineering and IT, Manipal Academy of Higher Education, Dubai Campus, UAE. Neil Sabin School of Engineering and IT, Manipal Academy of Higher Education, Dubai Campus, UAE. Sachidananda H K School of Engineering and IT, Manipal Academy of Higher Education, Dubai Campus, UAE. Smart mobility solutions aid the growth of smart cities by creating a better quality of life and reducing its environmental footprint. Emissions from petrol- and diesel-powered vehicles are a major contributor to the deterioration of air quality around the world. In addition to this, rising fuel prices continue to take a heavy toll on the pockets of the working class. A favourable countermeasure to this predicament is the fabrication of a vehicle that takes advantage of the earth’s most abundant resource “Air” as an energy source. The compressed air vehicle is an eco-friendly vehicle which works on air. This research work aims at designing a cheaper, more efficient and aesthetically appealing automobile while efficiently running on this renewable energy. The car model has been designed using the software solid works and tested on ANSYS workbench followed by rigorous trials to ensure its optimal performance and safety. The designed car can reach speeds ranging from 10-20 km/h while being eco-friendly and sustainable at the same time. This vehicle can be used for short distance applications such as golf carts, mall taxis etc. 11 30 2019 4816 4823 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.J9026.119119 https://www.ijitee.org/portfolio-item/J90260881019/ Department of ECE, Sapthagiri College of Engineering, Bangalore, Karnataka, India. Padmavathi C* Veenadevi S V Department of ECE, R. V College of Engineering, Bangalore, Karnataka, India. Electrocardiogram signals are highly susceptible to interferences caused due to various kinds of noises including artefacts’, disruptions in power lines attained from the human interferences and device disturbances. These noise signals tend to lower the quality of signals that result in crucial environment for detecting and diagnosing different types of arrhythmia. In order to avoid this issue, multiple filtering techniques are being incorporated out of all Gaussian filters with Haar DWT portray better outcomes in noise elimination and smoothening of signal. The process of ECG signal filtering allows performing the testing and validation of in the actual world emulation. Enhancement in PSNR ratio is observed by using the ECG signal filters along the reconstructed signal. For a given input ECG signal, the levels of the signal peak decide if the patient is suffering from arrhythmia or not. If peak is low, patient is detected with the arrhythmia disease, if high patient is normal. The results can be observed in simulation. FPGA prototyping of the design is carried out along the hardware debugging in chip scope pro tool. The design is realized using Verilog coding with the technique of morphological filtering. For the purpose of debugging the hardware device used is Artix-7. The FPGA methodology is success full in a position to detect arrhythmia. The framework based on FPGA is structured and executed in the paper which can detect a type of arrhythmia which indicates Atrio Ventricular block along with all the noises removed. The simulation results are obtained by taking ECG signals from MIT-BIH arrhythmia database. The proposed FPGA based system design is proven to be optimized as it showed very less utilization of resources when compared to previous arrhythmia detection system designs. 11 30 2019 2808 2818 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.J9420.119119 https://www.ijitee.org/portfolio-item/J94200881019/ Associate Professor, Department of Enterprise, Trade and Exchange Activities State University of Telecommunications, 03680, Solomenska st. 7, Kyiv, Ukraine Oksana Zghurska* Tetiana Somkina Professor, Doctor of Economic Sciences, Department of Enterprise, Trade and Exchange Activities; State University of Telecommunications, 03680, Solomenska st. 7, Kyiv, Ukraine Ruslan Dymenko Associate Professor without tenure, Head of the Department, PhD in Economic sciences, Department of Enterprise, Trade and Exchange Activities; State University of Telecommunications, 03680, Solomenska st. 7, Kyiv, Ukraine Tetiana Kapelyushna Associate Professor, Department of Enterprise, Trade and Exchange Activities State University of Telecommunications, 03680, Solomenska st. 7, Kyiv, Ukraine The article defines the concept of «entrepreneurial risk» as a key element of effective entrepreneurial activity and an important component of management theory and practice. The mechanism of calculating the losses of entrepreneurial activity is determined and the causal-consequential connection of the degree of influence of business risks to the results of economic activity of the enterprise is reflected. The influence degree of various business risks on the results of economic activity of management subject is indicated. The concept of «diversification» as one of the of economic types process is substantiated. The identified diversification as one of the strategic alternatives to the development of the enterprise is emphasized, which allows obtaining additional economic benefits in the conditions of a complex market situation. The essence of the diversification process and the disadvantages inherent in the strategy of diversification are determined. Mechanisms of diversification strategy formation are substantiated. The main forms that are used in the risk management process based on the strategy of diversification are highlighted. The urgent questions of diversification strategy application by the countries of the European Union are emphasized. The efficiency of diversification strategy application on the example of activity of the largest corporations according to sales volumes on the world pharmaceutical market is considered. The dynamics of sales growth volumes of the world pharmaceutical market is shown. The significant synergistic effect of two or more enterprises is emphasized, which helps to save resources by reducing costs, combining complementary resources, growing market weight as priority areas for investment and the conquest of new markets. The experience of world leaders in implementing the diversification strategy as the driving force of the unceasing development of the world pharmaceutical industry has been analyzed. Taking into account the experience of foreign countries, the main directions of diversification strategy application by national enterprises of the pharmaceutical industry are analyzed. The importance of cooperation with foreign partners as the main strategic reference point in the development of national entrepreneurship is determined. The proposed conceptual knowledge-resource-market integration portfolio of diversification strategy of business activity, the advantage of which is to combine individual knowledge, resource potential and entrepreneurial capabilities to make an effective economic decision in order to profit and strengthen competitive advantages in the national and foreign markets. It is emphasized on the importance of quality conformity of national products to European quality standards, as well as effective integrated approach to production activity, perspective recommendations on the diversification strategy for national entrepreneurship in the conditions of Eurointegration. 11 30 2019 4809 4815 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.J9443.119119 https://www.ijitee.org/portfolio-item/J94430881019/ Department of CSE, Vel Tech RangarajanDr.Sagunthala R & D Institute of Science and Technology R. Kavitha* Sonal Singh Student, Department of CSE, Vel Tech Rangarajan Dr.Sagunthala R & D Institute of Science and Technology Stock market prediction has been an important issue in the field of finance, engineering and mathematics due to its potential financial gain. Stock market prediction is a process of predicting the future value of a company stock or other financial instrument traded in financial market. Stock market prediction brings with it the challenge of proving whether the financial market is predictable or not, since stock market data is of high velocity. This project proposes a machine learning model to predict stock market price based on the data set available by using LSTM model for performing prediction by de-noising the data using wavelet transform and performing auto-encoding on the data. The process includes removal of noise, preprocessing, feature selection, data mining, analysis and derivations. This project focuses mainly on the use of LSTM algorithm along with a layer of neural network to forecast stock prices and allocate stocks to maximize the profit within the risk factor range of the stock buyers and sellers. 11 30 2019 2819 2823 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.J9824.119119 https://www.ijitee.org/portfolio-item/J98240881019/ Master, Department of Electrical and Electronics Engineering, JNTUA JNTU College of Engineering Anantapuramu, Andhra Pradesh, India. S. Jayanthi* K.Firdose Kowser Ahamadia Assistant Professor (Adhoc) Department of EEE, JNTU College of Engineering Anantapuramu, Andhra Pradesh, India. M. Rathaiah Assistant Professor (Adhoc), Department of EEE, JNTU College of Engineering Anantapuramu, Andhra Pradesh, India. This paper presents a multiloop control for the different dimensional multivariable processes which are having the strong interrelation amid its variables. The objective of this discussion is to enhance the overall performance of the system by reducing the effects of interrelation of process variables. The prerequisite for design of multi loop control is to determine the best pair of controlled variables. In this paper the pair of variables is identified by using the relative gains of the process variables. Based on these, the pair of possible control loops is identified and their FOPDT models are approximated. Then to improve the servo operation (for set point changes in input) the PID controller parameters are calculated for these models using Simplified IMC tuning formulas. To minimize the effects of interrelations fractional order filter is used. With this combination, the overall objective of the control system is fulfilled i.e., tracking the set point and lessening the interaction. To show the effectiveness, the two examples are considered with different dimension, interaction and controller is designed. The results show that the SIMC algorithm improved the performance of the system. 11 30 2019 4595 4600 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.K1509.119119 https://www.ijitee.org/portfolio-item/K15090981119/ Department of E.C.E, JNTU Anantapuramu, Anantapuramu, India. P Sai Vinay Kumar* M N Giri Prasad Department of E.C.E, JNTU Anantapuramu, Anantapuramu, India. Miniaturized multi functional planner array antennas are presented for both L and S bands in this paper. A 3x8 array is proposed and the distance between antenna elements is only λ/2 so that size reduced significantly. The two dielectric substrates FR4 and RT duriod 6010 are used for different antennas. The antenna with FR4 substrate is fabricated and compared the results with simulated values. Coaxial feeding technique is adopted. Dual frequency multi functional array is simulated .Better gains, return losses and radiation patterns are obtained .The circular polarization is obtained by truncating the elements and it is useful for navigation. The results are compared with existing multi object tracking radar (MOTR). 11 30 2019 2824 2828 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.K1714.119119 https://www.ijitee.org/portfolio-item/K17140981119/ Research Scholar, Department of Computer Science, Periyar E.V.R College, Tiruchirappalli, Tamil Nadu, India Lakshna Arun* T.N. Ravi Assistant Professor, Department of Computer Science, Periyar E.V.R College, Tiruchirappalli, Tamil Nadu, India. Mobile cloud computing (MCC) is a program that should be applied to defeat the hurdles of computing in the mobile environment. Though developing data-intensive purposes, such as Natural Language Processing (NLP) and face recognition, takes more difficulties on mobile cloud computing stages because of data location and high bandwidth cost issues. To overcome these issues, this paper proposes a dynamic task (resources) allocation model to schedule data-intensive applications on mixed resources (public cloud, cloudlets, and mobile devices) computing environments. Efficient task allocation strategy requires to develop by estimating the number of intentions while performing the decisions of allocation, such as fast response and reduced consumption of energy, to obtain the most reliable task allocation providing the requirements of cloud users and increasing the MCC environment performance. In this paper, Cultural Algorithm (CA) based offloading strategy is proposed for obtaining the minimized task execution time by causing smart decisions for allocation. This proposed algorithm has been implemented using a cloudsim toolkit, and the performance is estimated by analyzing with Genetic and greedy algorithm allocation techniques on a collection of parameters like throughput and makespan for scheduling the resource. 11 30 2019 2829 2833 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.K2107.119119 https://www.ijitee.org/portfolio-item/K21070981119/ Department of Computer Science Engineering RajaRajeswari College of Engineering, Bangalore, India Manasa M J* S Usha Department of Computer Science Engineering RajaRajeswari College of Engineering, , Bangalore, India Rajesh K S Department of Computer Science Engineering RajaRajeswari College of Engineering, , Bangalore, India. The cloud storage with user facilities like great data storage quality, higher computing, scalable and flexible has been one of the major application of cloud computing. Large number of data holders is subcontracting the files to the cloud. The cloud server being a public domain is not very reliable thus the data holders are required to find a reliable and trustworthy way to check the ownership of the data files that they subcontract on the cloud server which is present in a remote location. To tackle this drawback number of Distant Data Integrity Checking (DDIC) protocols is in the literature but these protocols have liabilities with respect to the data dynamics and the efficiency. This work recommends a novel DDIC protocol built across homomorphic-hash-function. This system gives a resistance against number of attacks like replay, replaces and falsifications. This work introduces the Operation-record-table(ORT) which is an optimized table resulting in keeping the constant cost for supporting the data variations and keep tracks of blocking the file operations. 11 30 2019 4601 4605 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.K2115.119119 https://www.ijitee.org/portfolio-item/K21150981119/ Research Scholar, Department of Biomedical Engineering, Bharath University, Chennai, India. S. Anandh* Dr. R. Vasuki Professor and Head, Department of Biomedical Engineering, BharathUniversity, Chennai, India. Dr. Raid Al Baradieis Associate Professor, Department of Medical Lab, Majmaah University, Kingdom of Saudi Arabia. Abdominal Aortic Aneurysm (AAA) is a substantial enlargement of the aorta that weakens the blood vessel wall leads to atherosclerotic disease. Aneurysms are dangerous because when it rupture causing hemorrhage. This leads to insufficient blood flow from the aorta to the different organs of the human body. Based on the extracted features from the AAA and the demographic data of the patient, the clinical management team will decide the optimal treatment procedure. The screening of AAA is done by ultrasound scan to know the type of the aneurysm present. Diameter with 05.05 cm or more, it should be viewed seriously. The AAA images were segmented using connected components labeling technique. Early detection of aneurysm can be repaired with proper treatment so that it does not rupture. The CT images of AAA were read and denoisedto preserve the edges using image processing software. Based on the histogram of the filtered image the AAA area was identified and threshold the image to view clearly the dilated part. The area, major axis length, minor axis length of the AAA images were calculated to understand the flow dynamics and to predict the rupture of the AAA wall using MATLAB, LabVIEW and python program. 11 30 2019 3550 3553 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A2487.119119 https://www.ijitee.org/portfolio-item/L24871081219/ Department of Electronics and Communication Engineering, Noida sInstitute of Engineering and Technology Ashutosh Kumar Singh* Kamal Bhati Department of Electronics and Communication Engineering, Noida Institute of Engineering and Technology a low voltage CMOS Nano power current reference circuit has been presented in this paper and also the circuit simulation performance in 180-nm UMC CMOS technology. Most of the MOSFETs operate in sub-threshold region consisting of bias-voltage, start-up and current-source sub-circuits. A stable reference current of 4-nA lying in supply voltage range of 1 V-1.8 V has been generated with line sensitivity of 0.203% /V. Within the temperature range of 0°C to 100 °C, and the voltage level of 1.8 V, the temperature coefficient was 7592ppm/°C. At the same voltage supply, the power dissipation was found out to be 380 NW. It is suitable to use this circuit in sub threshold power aware large scale integration. 11 30 2019 4657 4660 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.L2609.119119 https://www.ijitee.org/portfolio-item/L26091081219/ Professor, Department of Computer Science and Engineering, Shadan Women's College Of Engineering & Technology, Hyderabad, Telangana, India Dr. G. Kalaimani* Dr. G. Kavitha Professor, Department of Computer Science and Engineering, Muthayammal Engineering College, Kakkaveri, Rasipuram, Tamil Nadu, India. In this paper, data collection is the operation of gathering a lot of details from the sensor nodes and shipping it to the sink node. The use of Network is increasingly required to perform these processes, so, increases energy consumption. A lot of WSN architectures are designed to solve this complex problem. By using a technique called Decision Tree Classifier using Adaboost (DTCA) algorithm, can extension that data collection efficiency, as well as reducing the delay and Power consumption. In the proposed methodology, the power of each sensor node should be estimated at the outset. Then the mobile sink node receives the information from the high power sensor nodes with minimal delay. The mobile sink node classifies the data pockets using the Decision Tree Classifier. This classifies based on the relationship between the sensor nodes in WSN. That relationship is measure using the method of population Pearson product moment correlation coefficient. Adaboost algorithm is a combination of several weak non-linear classifiers to create a higher classification. Then finally, it sends classified particulars to Base Station. The operation of the DTCA system is convey out with divergent parameters such as classification time, EC, (Network Lifetime) NL, data collection capability, Classification Accuracy (CA), (FPR) false positive rate and delay. 11 30 2019 2834 2840 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.L2690.119119 https://www.ijitee.org/portfolio-item/L26901081219/ Engineering Department, The Mohammadia School’s of Engineers, Mohammed V University, Rabat, Morocco. Chaymae Laoufi* Ahmed Abbou Engineering Department, The Mohammadia School’s of Engineers, Mohammed V University, Rabat, Morocco. Mohammed Akherraz Engineering Department, The Mohammadia School’s of Engineers, Mohammed V University, Rabat, Morocco. Zouhair Sadoune Professor, Department of Physics, Ibn Tofail University, Kenitra, Morocco. This paper deals with the indirect rotor field-oriented control of asynchronous motor whose speed is controlled by a fuzzy self-adjustable proportional integral controller. This motor drive is used to propel an electric vehicle. The designing and the implementing of the fuzzy self-adjustable proportional integral controller are presented. This controller is proposed as a solution to compensate for the effect of the machine parameters variation and the external conditions. The characteristic of this controller is its capacity to adapt in real time its gains in order to reject the machine parameters disturbances. A series of measurements has been achieved to prove the performances of the improved drive using the proposed controller. Experimental results showed the high-speed tracking and the rejection disturbances capacity of the fuzzy self-adjustable proportional integral controller. 11 30 2019 2841 2847 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.L2974.119119 https://www.ijitee.org/portfolio-item/L29741081219/ Faculty of Technology Management & Business, University Tun Hussein Onn Malaysia. Zahoor Ur Rehman* Siti Sarah Binti Omar Faculty of Technology Management & Business University Tun Hussein Onn Malaysia. Shafie Bin Mohamad Zabri Faculty of Technology Management & Business, University Tun Hussein Onn Malaysia. Sonia Lohana Faculty of Technology Management & Business, University Tun Huseein Onn Malaysia. In electronic banking channels, mobile banking signifies a great innovation. Nonetheless, because of few reasons, customers are not quite sure about its usage. Numerous studies conducted regarding mobile banking adoption in different countries; however, fewer studies have been directed in Malaysia. In this study, we contributed to the research on e-banking adoption, specifically acceptance of mobile banking in Malaysia, and we enhanced our comprehension of customer’s attitude towards advanced technology system usage. Like so, it is essential to grasp the aspects impacting the intention to approve mobile banking channel in Malaysia. For the purpose, we suggested a new conceptual model by extending the Technology Acceptance Model (TAM) with new variables that are privacy risk and security risk, which also filled the research gap. The study core objective was to examine the aspects affecting individual’s attitude and behavioural intention to use mobile banking services in Malaysia. SEM technique was used through Smart-PLS3 for the analysis of data with a sample frame of 384 based on Krejcie and Morgan. The result revealed a significant and positive relationship between perceived ease of use, usefulness and attitude towards using mobile banking while a negative and significant relationship between privacy risk, security risk and attitude towards using mobile banking in Malaysia. 11 30 2019 4231 4239 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.L3015.119119 https://www.ijitee.org/portfolio-item/L30151081219/ Research Scholar, Vivekanadha College Of Arts And Science For Women, Tiruchengode. V. Priyanka* Mrs. N. Kohila Assistant Professor, Vivekanadha College Of Arts And Science For Women, Tiruchengode. The endeavor is made arrangements for structure up the utilization of palmistry to find the human ailment from their palm. Palm looking for is a sensational issue in the restorative administration's system. In the proposed methodology, Palm investigating is inspected from the perspectives of model assertion, heuristics, and learning. Two sorts are cleared in this technique. Tremendous learning is one of the perspectives in AI that has an unusual condition of accreditation. In standard palmistry has used in the past method of room science. It is the distortions the future from the palm print of an individual. In this endeavor the palm print utilities for a blemish the sickness with the help of Artificial Immune System (AIS) to get to the human lead. CLONALG is a count, which is executed to recognize the blemish area. While separating of palm print we can without a lot of a stretch find the disfigurement domain. The character perceiving confirmation has been the palm print unmitigated dependent on Convolutional Neural Networks (CNN) which detects the efficient process of FS and VS. 11 30 2019 4077 4080 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.L3027.119119 https://www.ijitee.org/portfolio-item/L30271081219/ Research Scholar, Electronics Department, Walchand College of Engineering, Sangli, Maharashtra, India. Tejaswi Jadhav* Shraddha Deshpande Electronics Department, Walchand College of Engineering, Sangli, Maharashtra, India. A wideband circularly polarized (CP) planar inverted-F antenna (PIFA) is proposed and designed using reactive impedance surface (RIS) for mobile communication. PIFA with RIS is used for CP radiation, size reduction and wideband of the proposed CP-PIFA. It is a different technique for improving the various performance parameters of the antenna, that is, narrow bandwidth, size reduction, and the axial ratio (AR). The structure of circular polarized PIFA is designed, analyzed, geometrically optimized, and implementation of the antenna to operate at 2.4 GHz WLAN bands. Finally, a proposed CP-PIFA is analyzed and simulated using full 3D electromagnetic high-frequency structure simulator (HFSS). The measured impedance bandwidth of designing an antenna (S11) 10-dB is 1399 MHz (1.542-2.943 GHz) 58.29\%, simulated 3-dB axial ratio bandwidth is 870 MHz (1.639-2.50 GHz) 36.25\%, measured voltage standing wave ratio (VSWR) is 1.02 and the realized gain is 8.1 dB for the 2.4 GHz WLAN bands. 11 30 2019 4240 4245 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.L3064.119119 https://www.ijitee.org/portfolio-item/L30641081219/ Assistance Professor, Department of Computer Science and Engineering, Visvodaya Engineering College, Kavali, (A.P.) India. Ch. Venkateswarlu* P. Uma Maheswari Department of Computer Science and Engineering,, PBR Visvodaya Institute Of Technology And Science, Kavali, (AP), India Due to constrained assets and adaptability, security protocol for Internet of Things (IoT) should be light-weighted. The cryptographic solutions are not possible to apply on little and low-power devices of IoT in view of their power and space impediments. In this paper, a light-weight protocol to verify the information and accomplishing information provenance is introduced for multi-hop IoT arrange. The Received Signal Strength Indicator (RSSI) of conveying IoT nodes are utilized to produce the connection fingerprints. The connection fingerprints are coordinated at the server to process the relationship coefficient. Higher the estimation of connection coefficient, higher the rates of verified information move. Lower worth gives the recognition of ill-disposed node in the middle of a particular connection. Information provenance has additionally been accomplished by examination of pocket header with all the accessible connection fingerprints at the server. The time unpredictability is processed at the node and server level, which is O(1). The power scattering is determined for IoT nodes and overall network. The outcomes demonstrate that the power utilization of the framework and time complexity. Exploratory outcomes show that up to 97% connection is accomplished when no attacker node is available in the IoT network. 11 30 2019 2848 2854 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.L3093.119119 https://www.ijitee.org/portfolio-item/L30931081219/ Associate Professor, Dept. of CSE, PBR VITS, Kavali, AP, India. P. Eswaraiah* Priyanka M.Tech, Dept. of CSE, PBR VITS, Kavali, AP, India Financial Fraud, for example, tax evasion, is known to be a genuine procedure of wrongdoing that makes misguidedly got assets go to psychological warfare or other crime. This sort of criminal operations include complex systems of exchange and money related exchanges, which make it hard to recognize the extortion elements and find the highlights of fraud. Luckily, exchanging/exchange system and highlights of elements in the system can be developed from the mind boggling systems of exchange and money related exchanges. Exchanging/exchange system uncovers the association among substances and consequently irregularity discovery on exchanging systems can uncover the elements engaged with the misrepresentation movement; while highlights of elements are the depiction of elements and abnormality identification on highlights can reflect subtleties of the extortion exercises. In this manner, system and highlights give integral data to extortion discovery, which can possibly improve fraud recognition execution. Nonetheless, most of existing strategies center on systems or highlights data independently, which doesn't use both data. In this paper, we propose a novel fraud identification framework, CoDetect, which can use both system data and highlight data for money related extortion discovery. What's more, CoDetect can all the while identifying money related fraud exercises and the component examples related with the extortion exercises. General examinations on both real world information and certifiable information exhibit the productivity and the adequacy of the proposed structure in battling monetary extortion, particularly for tax evasion. 11 30 2019 3554 3558 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.L3095.119119 https://www.ijitee.org/portfolio-item/L30951081219/ Mechanical Engineering Department, Papua New Guinea University of Technology, Lae, Papua New Guinea. Peter Oyekola Aezeden Mohamed* Mechanical Engineering department, Papua New Guinea University of Technology, Lae, Papua New Guinea. Olufemi Solomon Aforijiku Mechanical Engineering department, Bells University of Technology, Ogun, Nigeria Elizabeth Oyekola Electrical Engineering department, Bells University of Technology, Ogun, Nigeria. The erratic power supply has been a growing cause for concern in developing countries. It becomes more challenging to supply adequate energy in countries with a high population due to the increased demand and this has led to load shedding and spreading in Nigeria. Also, emissions from power plants, impacts of hydroelectric development, and risks associated with nuclear energy use have been targets for political action due to the recent pursuit of sustainability development. Also, evidence of depletion of the protective ozone layer and its impact on the environment have urged the need for rapid development of alternative power generation method void of causing adverse environmental impact. This paper, therefore, discusses the design and evaluation of a self-starting fuel less power generator using DC motor as the prime mover to generate electrical energy from an alternator. The alternator armature shaft was coupled directly with DC motor powered by a rechargeable battery. The DC motor rotates the armature of the alternator in the field coil at high speed when activated from the starting switch, which results in alternating current output voltages of 220V. 11 30 2019 3559 3563 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.L3122.119119 https://www.ijitee.org/portfolio-item/L31221081219/ Department of Telecommunication Engineering, (Urgench branch of Tashkent University of Information Technologies named after Muhammad al-Khwarizmi), Urgench, Uzbekistan Samandarov Bunyod G’ayratovich* Matqurbanov To’lqin Alimboevich Department of Telecommunication Engineering, (Urgench branch of Tashkent University of Information Technologies named after Muhammad al-Khwarizmi), Urgench, Uzbekistan, Yangiboeva Madina Rustamovna Department of Telecommunication Engineering, (Urgench branch of Tashkent University of information technologies named after Muhammad al-Khwarizmi), Urgench, Uzbekistan Nowadays, users of the internet are becoming increasingly popular, because of this rising load packets of network and delay requests. In this paper, we offer a method to improve allocation resource in the IMS servers. Implementation of technology for balancing of loading in practice allows to optimize the decision of distribution tasks of signal and information flows on telecommunication networks. In case of uniform loading of the IMS servers and routers of a backbone network (devices of the network), the average time of a time delay of signal and information packets is minimum. Uniformity of loading of network devices is reached due to the uniform distribution of a flow of packets. The criterion of efficiency of methods of distribution of flows is the average square deviation (a balanced index) of congestion of network devices. AnyLogic 7 agent system toolbox is used to simulate the proposed system. 11 30 2019 4606 4609 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.L3127.119119 https://www.ijitee.org/portfolio-item/L31271081219/ PG Scholar, Department Of EEE, CMR College Of Engineering & Technology, Kandlakoya, Hyderabad, Telangana. M. Swetha* M.Suneel kumar Assistant Professor, Department Of EEE, CMR College Of Engineering & Technology, Kandlakoya, Hyderabad, Telangana. S. Muthubalaji Professor, Department Of EEE, CMR College Of Engineering & Technology, Kandlakoya, Hyderabad, Telangana. Deriving quality power is the vital problem in power system network. The main focus of the paper is to reduce the power quality issues mainly the reduction of harmonics using source compensation technique. This paper proposes a grid integrated hybrid system with ANFIS. This hybrid system mainly consists of PV panel, inverters, fuel cell, batteries and filters. Based on working principle and characteristics of the proposed hybrid system, the composite control strategy about active power, reactive power and harmonic suppression is proposed. The composite control strategy are of two loops ie., a single closed-loop control response active power and reactive power, double closed-loop control responses harmonics. Both balanced source condition and unbalanced source condition for three phase system are developed by Simulink model. The balanced and unbalanced source performance is done by using ANFIS. PI controller and ANFIS are compared with their Simulink results. Simulation results shows the performance of ANFIS is better than PI controller. 11 30 2019 2855 2860 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.L3136.119119 https://www.ijitee.org/portfolio-item/L31361081219/ Dept.of Mechanical Engg., Koneru Lakshmaiah Education Foundation, Guntur, India Dr.S.N. Padhi Dr.K.S. Raghuram Department of Mechanical engineering, Vignan's Institute of Information Technology, Visakhapatnam, A.P., India. G. Bhavani Department of Mechanical engineering, Vignan's Institute of Information Technology, Visakhapatnam, A.P., India. V.Naga Sudha Department of Mechanical engineering, Vignan's Institute of Information Technology, Visakhapatnam, A.P., India. *Dr.T. Rout Dept.of Mechanical Engg., Parala Maharaja Engineering College, Berhampur,India This work is concerned to examine the rotational stability of functionally graded cantilever Timoshenko beams. Power law with various indices as well as exponential law were used to find out the effect of hub radius parameter on the stability of both functionally graded ordinary (FGO) beam. Floquet’s theory was used to establish the stability boundaries. The governing equation of motion was followed by Hamilton’s principle and solved by Finite element method. Dependence of Bulk modulus on thickness of beam was studied using both power law and exponential distribution. The influence of hub radius parameter was found to be enhancing the stability of FGO beams. It has further been confirmed that the effect of hub radius with exponential distribution of constituent phases renders better stability compared to power law distribution of the phases in the functionally graded material(FGM). 11 30 2019 4246 4251 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.L3149.119119 https://www.ijitee.org/portfolio-item/L31491081219/ Associate Proffessor, Department of EEE, Audishankar College of Enginrring and Technology, Gudur, Andhra Pradesh, India. E. Praveena* Dr.J.Viswanatha Rao Professor, Department of EEE, VNR Vignana Jyothi Institute of Engineering and Technology, Hyderabad, India. Dr. R. Srinivasa Rao Professor, Department of EEE, University College of Engineering, JNTUK, Kakinada. Electricity usage is increasing day by day but we are unable to supply it. It needs to increase the use of renewable energy sources. Micro Grid is an alternative system to meet the rapid load changes in future with the hybrid energy system (HES). In this paper, the micro grid is constructed with combines battery and super capacitor to store the electrical energy, and the power management is done using the drop control strategy. The system is designed so that the micro grid can withstand different load challenges like step and pulse. The severity of the loss due to the sudden changes in submarine (SM) power system (SPS), voltage differences occur, it has to escape use the DC micro grid in this process analyzing the power controlling of DC micro grid, the battery, the super capacitor connected to the SPS power grid using Mat Lab/simulink. 11 30 2019 4621 4627 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.L3173.119119 https://www.ijitee.org/portfolio-item/L31731081219/ Electrical Engineering and Engineer Profession Program Department at Universitas Muhammadiyah Yogyakarta, Indonesia Dr., Iswanto.* Nanik Prasetyoningsih Lecturer and Researcher in the Faculty of Law at Universitas Muhammadiyah Yogyakarta. Gendroyono Lecturer and Researcher, English Education Department, Universitas Muhammadiyah Yogyakarta. Guntur Nugroho Lecturer and Researcher, Department of Civil Engineering, Universitas Muhammadiyah Yogyakarta. Meiyanto Eko Sulistyo Assistant Professor, Department of Electrical Engineering, Faculty of Engineering, Universitas Sebelas Maret (UNS), Indonesia. Dusun Penggung is one of the Dusun (sub-village) located in Giripurwo village, Girimulyo district, Kulonprogo regency. The geographical condition, dry soil nd far distance from the city are the main factors of underdeveloped village. Most of the people work as rice and corn farmers. During the dry season, there is a decline in agricultural activities because lack of water so that the people leave the farmer works to raising livestock and cultivating fish. The problem that occurs is the lack of skill in utilizating cattle dung to be used as soil fertilizer, in fish farming which has a great potential to increase income, in the health sector where the majority of Dusun Penggung residents work from morning to evening, which should require special attention on the health. Based on these potentials and problems, building village society to be a healthy and productive society program was conducted. The objectives of the program are to increase the knowledge and insight on the use of animal manure as fertilizer, increase understanding of fish farming procedures and productivity by making proper constructed fish ponds, provide information about various plants that are beneficial to health, and provide knowledge about telang flowers tea and natural dyes to maintain health. The main programs carried out included the utilization of animal manure, counseling and training on fish farming, counseling and training on planting, and utilization of telang flowers tea for health. 11 30 2019 2861 2865 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.L3410.119119 https://www.ijitee.org/portfolio-item/L34101081219/ Research Scholar, KL Education Foundation, Guntur. S.Swapna Sabari* Dr.A.V.S Kamesh Professor, KL Business School KL Education Foundation ,Guntur. The evolution of information technology is seen as a response to the growing needs for business organizations to keep abreast with industry trends, as well as necessary needs and preferences of employees, other stakeholders. From current literature most of the studies document several factors that continue to experience positive effects relative to the banking industry’s increasing adoption of IT. Some of these factors (which play a moderating role in assuring improved performance, productivity or efficiency among employees) include work infrastructure, ease of use, enhanced coordination, skill compatibility, confidence, effective time management, the creation of trust, and higher employee returns (through improved service quality). The present paper suggest that IT implementation through training has led to skill improvements among employees and also yielded a positive, supportive work environment that has, in turn, motivated workforces towards supporting the vision and mission or banking institutions with which they work. 11 30 2019 4252 4256 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.L3618.119119 https://www.ijitee.org/portfolio-item/L36181081219/ Assistant Professor, Computer Science & Engineering, Appa Institute of Engineering & Technology, Kalaburgi. Gajendran Malshetty* Dr. Basavaraj Mathapati Professor, Computer Science & Engineering, Appa Institute of Engineering & Technology, Kalaburgi, India. in WSN, clustering gives an effective way to enhance the network lifetime. Moreover It has been observed that the clustering algorithm utilizes the two main technique first is selection of cluster head and cycling it periodically in order to distribute the energy among the clusters and this in terms increases the lifetime of network. Another challenge comes with this is minimize the energy consumption. In past several algorithm has been proposed to increase the lifetime of the network and energy consumption, however these methodologies lacks from efficiency. In this paper, we have proposed a methodologies named as EE-CI (Energy Efficient Clustering using Interconnection), along with the random updation. Here the networks are parted into different clusters, the cluster updation are done based on the CHC scheme. Moreover, in proposed methodology cluster updation and data sample is determined through the change in sensor data. Here we propose a method for sampling sensor and CHC for selecting the cluster head to balance the energy and improvise the energy efficiency. Moreover, the proposed methodology is evaluated and the result is demonstrated by considering the Leach as existing methodology, experiments results shows that the proposed methodology outperforms the existing methodology. 11 30 2019 3564 3571 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A3799.119119 https://www.ijitee.org/portfolio-item/L37991081219/ Associate Professor in Accounting and Head of Accounting Technology Program, Faculty of Economics an Communication, Bina Nusantara University, Jakarta, Toto Rusmanto* Melinda Lisal SE. graduated Student, Accounting Department, Faculty of Economics and Communications, Bina Nusantara University, Jakarta, Indonesia This study aims to observe and analyze the influence of proportion of independent board commissioners, the audit committee, board of directors, return on asset, return on equity and environmental performance towards firm value. Firm value was proxied with Tobin’s Q. The population in this study is manufacturing companies listed in Indonesia Stock Exchange year 2013 – 2017. The study used 18 sample companies from 160 companies. The sample was determined by using purposive sampling. The result of this study showed that proportion of independent board commissioners, audit committee and Return On Assets has a significant effect on firm value while the board of directors, Return On Equity and PROPER has no significant effect on firm value. 11 30 2019 4610 4613 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.L3837.119119 https://www.ijitee.org/portfolio-item/L38371081219/ Ph.D Research Scholar, Department of Physics, Islamiah College (Autonomous), Vaniyambadi, Tamil Nadu. Mr.M. Aravinthraj* Dr.J. Udayaseelan Guest Lecturer, Department of Physics, GTM College, Gudiyatham – 632 602, Tamil Nadu, India. Dr.F.Liakath Ali Khan Controller of Examination and Associate Professor, Islamiah College, Vaniyambadi, Tamil Nadu, India. For the present study, the estimation of the static dielectric constants (0), dielectric constant () at an angular frequency and dielectric loss () of methyl, ethyl and propyl amines with 2-fluorobenzoic acid in 1,4-dioxane were carried using Klystron microwave bench at frequency 9.43GHz. Using the dielectric parameters, the overall relaxation time (1) and group rotation relaxation time (2) of the polar solute molecules and average relaxation times (0) were also determined using Higasi and Gopalakrishna method employing Debye’s equations. The obtained results revealed that, out of five different molar ratios, relaxation time () is maximum at 1:1 molar concentration for all the systems due to inter and intramolecular interactions through hydrogen bonding. In addition, the dipole moment, activation viscous flow (f) and dielectric relaxation (f) due to molar free energy also been discussed. 11 30 2019 2866 2870 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.L3838.119119 https://www.ijitee.org/portfolio-item/L38381081219/ Department of Mechanical Engineering, St. Peter’s Institute of Higher Education and Research, Avadi, Chennai-600054, Tamil Nadu, India P. Periyasamy* Gurusami K Department of Mechanical Engineering, St. Peter’s Institute of Higher Education and Research, Avadi, Chennai-600054, Tamil Nadu, India. M. C. Anand Chakaravarthi Department of Mechanical Engineering, Sri Sairam Engineering College, Chennai *D. Muruganandam Dean Research, Sri Venkateswaraa College of Technology, Tamil Nadu, India. J. Jayapriya Department of Mathematics in Sathyabama Institute of Science and Technology,Chennai- 600119 Tamil Nadu, India. In this work, the common fiber picked as banana fiber. Unidirectional mats were created and layered up, course of action with PLA gum network. The overlay is fabricated utilizing hand lay-up system. The Mechanical properties, for example, rigidity, flexural quality and effect quality are broke down on the created material. Too Miniaturized scale structure of the composite is examined utilizing checking electron magnifying lens (SEM). Specimens were cut from the created cover as indicated by the ASTM models for various analyses. For Tensile test and flexural test tests were cut fit as a fiddle and level bar shape separately. After that investigation is performed under UTM. Impact, Flexural and Tensile quality were watched and contrasted with base estimations of PLA polymer to see the adjustment in quality. SEM investigation was done to discover the method of disappointment. 11 30 2019 4661 4664 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A2210.119119 https://www.ijitee.org/portfolio-item/A2210109119/ Department of Mechanical Engineering, Sri Sairam Engineering College, Chennai V. Ravi Raj S. Rangarajan Department of Mechanical Engineering, St. Peter’s Institute of Higher Education and Research, Avadi, Chennai-600054, Tamil Nadu, India. B.Vijaya Ramnath Department of Mechanical Engineering, Sri Sairam Engineering College, Chennai *D. Muruganandam Dean Research, Sri Venkateswaraa College of Technology Tamil Nadu, India. J. Jayapriya Department of Mathematics in Sathyabama Institute of Science and Technology,Chennai- 600119 Tamil Nadu, India. Varieties in tractable and sway properties of Roselle fiber strengthened polyester composites brought about by the expansion of glass fiber have been investigated. Roselle fiber in mix with glass is magnificent for making economically savvy composite materials. The impact of the plan of glass and Roselle fiber in the readiness of composites have likewise been examined. Direct increment in rigidity is noted because of the expansion of glass. Be that as it may, when lower volume portion of glass is utilized, a cozy blend of Roselle fiber and glass demonstrates the most elevated rigidity. The effect quality demonstrates the most noteworthy worth when a glass volume part of 0.12 is utilized. 11 30 2019 4665 4669 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A2212.119119 https://www.ijitee.org/portfolio-item/A2212109119/ School of Computing, Sathyabama Institute of Science and Technology,Chennai, India. Suja Cherukullapurath Mana* T. Sasipraba School of Computing, Sathyabama Institute of Science and Technology,Chennai, India. This paper studies about various job scheduling methodologies used in big data systems. Map reduce is a highly efficient distributed job processing strategy for big data systems. Job scheduling is a critical task of any big data system as the volume of jobs need to be processed is tremendous. This study will go over the map reduce process in detail. It also reviews various job scheduling methodologies and tries to perform an efficient comparison among these methodologies. 11 30 2019 3394 3397 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A3903.119119 https://www.ijitee.org/portfolio-item/A3903119119/ Research scholar, Department of Mechanical Engineering, St Peter’s Institute of higher education and Research, Avadi, Chennai Vasudevarao Periyasamy. P Department of Mechanical Engineering, St Peter’s Institute of higher education and Research, Avadi, Chennai P.V.Narisma Rao* Research scholar, Department of Mechanical Engineering, St Peter’s Institute of higher education and Research, Avadi, Chennai Ramanan Sr Engineer, Synce Engineering service, Chennai Sharavanan Department of Mechanical Engineering, VISTAS, Pallavaram, Chenai The traditional machining consists of a specific contact between the tool and work piece. As a result of this contact the tool may wear out after a few operations. In addition to that, the MRR (Material Removal Rate), Surface Finish, etc. is also lowered. As a result of these drawbacks, traditional or conventional machining processes cannot be used to machine ceramic based alloys and thus we opt for unconventional machining process. The Electrical Discharge Machine contains of two spaces one is Electrode and other is Work piece. In this concept the among the tool wear rate is moderate and the surface roughness is to be poor. The tool cost is so high. Hence continuously tool modification is not possible. So in the work main objective of the problem is reduced the tool wear rate and increase the MRR. (Material removal rate). So in the case we are consider in the surface roughness. The surface roughness is to be high is the taken in industrial application. So we have focus with surface roughness. These are the considering with in our problems. In our aim is reducing the toll wear and improve the Material Remove rate. In order to addition of graphite in Electrolyte. When added the electrolyte in Graphite the Toll wear rate decrease and increase a material Removal Rate. Finally we have disc the DOE process 11 30 2019 3580 3583 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A3962.119119 https://www.ijitee.org/portfolio-item/A3962119119/ Assistant Professor, St. Joseph’s College of Engineering, Chennai, India, Ranjith R* Jothi S Associate Professor, St. Joseph’s College of Engineering, Chennai, India, Chandrasekar A Professor, St. Joseph’s College of Engineering Chennai, India Graphology is a technique for analyzing an individual’s personality based on the given sample of their handwriting. Graphology considers the fact that the movement of our hand is directly related to the state of our brain. This paper implements the techniques of graphology using machine learning. The pre-defined data about the analysis of handwriting is given as learning data set for the machine. An image of a handwritten text document in jpg format is given as input to this machine. The processed output gives the personality of the individual corresponding to the input handwriting. 11 30 2019 4734 4737 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A3973.119119 https://www.ijitee.org/portfolio-item/A3973119119/ (OptiMAS), Faculty of Information Communication and Technology, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka Malaysia, Zuraida Abal Abas Nurul Hafizah Mohd Zaki Faculty of Information Communication and Technology, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka Malaysia, Siti Azirah Asmai (OptiMAS), Faculty of Information Communication and Technology, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka Malaysia Ahmad Fadzli Nizam Abdul (OptiMAS), Faculty of Information Communication and Technology, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka Malaysia Zaheera Zainal Abidin (INSFORNET), Faculty of Information Communication and Technology, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka Malaysia Increasing the visibility in supply chain network had decrease the risk in industries. However, the current Cross-Time approach for temporal community detection algorithm in the visibility has fix number of communities and lack of operation such as split or merge. Therefore, improving temporal community detection algorithm to represent the relationship in supply chain network for higher visibility is significant. This paper proposed six steps model framework that aim: (1) To construct the nodes and vertices for temporal graph representing the relationship in supply chain network; (2) To propose an enhanced temporal community detection algorithm in graph analytics based on Cross-time approach and (3) To evaluate the enhanced temporal community detection algorithm in graph analytics for representing relationship in supply chain network based on external and internal quality analysis. The proposed framework utilizes the Cross-Time approach for enhancing temporal community detection algorithm. The expected result shows that the Enhanced Temporal Community Detection Algorithm based on Cross Time approach for higher visibility in supply chain network is the major finding when implementing this proposed framework. The impact advances industrialization through efficient supply chain in industry leading to urbanization. 11 30 2019 4509 4513 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4019.119119 https://www.ijitee.org/portfolio-item/A4019119119/ M. tech Student,Department of CSE, SRKR Engineering College affiliated to JNTU Kakinada, Bhimavaram, AP, India. Sikkisetti Jyothirmayee* V. Dilip Kumar Assistant Professor of Computer Science and Engineering, SRKR Engineering College affiliated to JNTU Kakinada, Bhimavaram,AP, India. Ch. Someswara Rao Assistant Professor of Computer Science and Engineering, SRKR Engineering Collegeaffiliated to JNTU Kakinada, Bhimavaram, AP,India. R. Shiva Shankar Assistant Professor of Computer Science and Engineering, SRKR Engineering College affiliated to JNTU Kakinada, AP,Bhimavaram, India. The stock market price trend is one of the brightest areas in the field of computer science, economics, finance, administration, etc. The stock market forecast is an attempt to determine the future value of the equity traded on a financial transaction with another financial system. The current work clearly describes the prediction of a stock using Machine Learning. The adoption of machine learning and artificial intelligence techniques to predict the prices of the stock is a growing trend. More and more researchers invest their time every day in coming up with ways to arrive at techniques that can further improve the accuracy of the stock prediction model. This paper is mainly concerned with the best model to predict the stock market value. During the mechanism of contemplating the various techniques and variables that can be taken into consideration, we discovered five models Which are based on supervised learning techniques i.e.., Support Vector Machine (SVM), Random Forest, K-Nearest Neighbor (KNN), Bernoulli Naïve Bayes.The empirical results show that SVC performs the best for large datasets and Random Forest, Naïve Bayes is the best for small datasets. The successful prediction for the stock will be a great asset for the stock market institutions and will provide real-life solutions to the problems that stock investors face. 11 30 2019 4081 4090 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4144.119119 https://www.ijitee.org/portfolio-item/A4144119119/ Associate prof, Sri Sairam Engineering College, Chennai. Ravi Raj.V Vijaya Ramnath.B prof, Sri Sairam Engineering College, Chennai. Naveen. E Asst prof, Sri Sairam Engineering College, Chennai. Ramanan. N Sr Enginner Synce Engineering Service, Chennai In this work, the Abrasive water jet machining process on a natural fiber composite material has been discussed . the material as in nature fibere material. The natural fiber material has in a low weight material. In the material used in a light weight application. In the material mostly used in a automobile structural application. In the material not used in load condition application. In the material used in a unload condition material. The material was prepared by hand layup technique. The material was discussed about the machining character station of the process. For this process, the following parameters - standoff distance, abrasive flow rate, water pressure were determined. The output parameters considered are Material Remove rate and Surface roughness. in this condition the material removal rate will be increased and the surface roughness also increased. In the above condition was been solve the problem. The DOE was done by Mine tab software. Finally, the optimization result of the process has been conculded. 11 30 2019 3584 3587 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4150.119119 https://www.ijitee.org/portfolio-item/A4150119119/ M.E.(Computer) Student at Department of Computer Engineering, RMD Sinhgad School of Engineering, Warje-58, Pune Miss. Komal Kundan Sharma* Prof. Jyoti Raghatwan at Department of Computer Engineering, RMD Sinhgad School of Engineering, Warje-58, Pune Prof. Mrunalinee Patole Department of Computer Engineering, RMD Sinhgad School of Engineering, Warje-58, Pune Prof. Vina M. Lomte Department of Computer Engineering, RMD Sinhgad School of Engineering, Warje-58, Pune Nowadays, crypto currency has become a trending theme within the software package globe. Crypto currency may be a digital quality that’s meant to operate as a dealings medium that utilizes sturdy cryptography to secure asset exchange and make sure plus transfer. Crypto currency is in addition spoken as digital suburbanised cash. Block chain stores knowledge concerning dealings which will be accustomed assess transaction trait. This voting system deals with multi chain block chain technology. We can define block chain as a digital transaction which is used to record financial transactions also as totally different transactions. As a result of the knowledge keep within the block chain isn’t related to personal identifiable information, it’s such a fanonymity attribute. Blockchain allows dealings and verification to be clear. The options of this block chain technology are useful in powerful voting system,robustness, obscurity and transparency. The electoral system is our country’s core. Veri- fication of fingerprints employed in this theme to authenticate identity of electors. 11 30 2019 3588 3597 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4170.119119 https://www.ijitee.org/portfolio-item/A4170119119/ Doctoral Program Student of Faculty of Public Health, Universitas Hasanuddin, Makassar Indonesia & Lecturer in Faculty of Public Health, Moeslim University of Indonesia Makassar, Indonesia Arni Rizqiani Rusydi Sukri Palutturi Professor, Department of Health Policy and Administration Faculty of Public Health, Universitas Hasanuddin Noer Bahry Noor Senior Lecturer in Department of Hospital Management Faculty of Public Health, Universitas Hasanuddin Makassar, Indonesia Syahrir A. Pasinringi Senior Lecturer in Department of Hospital Management Faculty of Public Health, Universitas Hasanuddin Makassar, Indonesia Andi Multazam Lecturer in Faculty of Public Health, Moeslim University of Indonesia Makassar, Indonesia Zuardin Faculty of Psychology and Health Sciences, UIN Sunan Ampel Surabaya, Indonesia Andriana Wiranto Moeslim University of Indonesia Makassar, Indonesia Ahmad Yani Department of Health Promotion, Faculty of Public Health Universitas Muhammadiyah Palu, Indonesia The newest development proves that hospital management is not sufficient to ensure that hospital management is efficient. A new instrument is needed to be called Good Corporate Governance to ensure that hospital management is implemented well. Public Regional Hospital of Haji is state-owned hospital type B. This hospital applied Hospital By-law, which is the internal regulation compiled in implementing Good Corporate Governance in a hospital. To analyze the application of Good Corporate Governance principals in RSUD Haji Makassar. This research is quantitative research through descriptive approach. Samples used are all staffs involved in organization structure of RSUD Haji Makassar, as many as 61 people. Sampling used was exhaustive sampling. Data collection was performed using questionnaire, completed with secondary data in the forms of hospital document and literature review. The research data was processed and analyzed using SPSS software. Transparency principle indicated that 47 people (76.48%) from the total respondents of 61 people obtained positive value. Accountability showed that 50 people (82.38%) from the total respondents of 61 people stated positive value, while in the fairness principle, most of the respondents, as many as 45 people (70.81) people also stated positive value. GCG principles have been applied well in RSUD Haji Makassar. The Good Corporate Governance needs to be maintained in order to increase the performance of RSUD Haji Makassar. There were still big intervention in this hospital, making the independency principal in this research could not be reviewed in depth. 11 30 2019 805 808 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4309.119119 https://www.ijitee.org/portfolio-item/A4309119119/ Assistant Professor in the Department of Computer Science and Engineering in SRM Institute of Science and Technology, Ramapuram, Chennai, Arun. V Bhooveshwaran. B pursuing bachelors in Computer Science Engineering, Ramapuram , Chennai. Rakkesh M.P pursuing bachelors in Computer Science Engineering, Ramapuram, Chennai Activities performed by humans is one of the major reasons for the increase in pollution. This increase in the pollution of earth unfairly influenced the water bodies that is a need for eternity. Asia has the most number of contaminated water bodies which is mainly composed of Bacteria through Human waste. Even if we side with treating water instead of prevention of pollution, identifying the extent to which the water body is contaminated is an essential problem that needs to be addressed. Factoring BOD and dissolved oxygen which are the prime causes of biological contamination of a water body is essential for a system monitoring water pollution. This paper addresses the issue of contamination magnitude through the use of IOT components. Monitoring and presenting data is the main scope of this system. 11 30 2019 809 811 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4312.119119 https://www.ijitee.org/portfolio-item/A4312119119/ Research Scholar, Department of Computer Science and Engineering, GITAM Institute of Technology, GITAM, Visakhapatnam, Andhra Pradesh, India B. Raja Koti* Dr. G. V. S. Raj Kumar Professor, Department of Computer Science and Engineering, GITAM Institute of Technology, GITAM, Visakhapatnam, Andhra Pradesh, India. Dr. K. Naveen Kumar Asst. Professor, Department of Computer Science and Engineering, GITAM Institute of Technology, GITAM, Visakhapatnam, Andhra Pradesh, India. In this modern era, all organizations depend on internet and data so, maintaining of all data is done by the third party in large organizations. But in this present on-developing world, one have to share the data inside or outside the organization which incorporates the sensitive data of the venture moreover. Data of the organization have sensitive data which should not share with any others but unfortunately, that data was there in the third party hands so; we need to protect the data and also have to identify the guilt agent. For this, we propose a model that would evaluate and correctly identifies guilt agents, for which a recursive partitioning has been created which is a decision tree that spills data in to the sub partitions and does the easiest way to get alert and at least one specialist or it can autonomously accumulate by some different means. The main intention of the model is to secure sensitive information by recognizing the leakage and distinguish the guilt agent. 11 30 2019 4091 4096 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4314.119119 https://www.ijitee.org/portfolio-item/A4314119119/ Department of Production Engineering, Royal Institute of Technology, Stockholm, Sweden, Erkan Yalcinkaya* Daniel T. Semere Department of Production Engineering, Royal Institute of Technology, Stockholm, Sweden, Antonio Maffei Department of Production Engineering, Royal Institute of Technology, Stockholm, Sweden Mauro Onori Department of Production Engineering, Royal Institute of Technology, Stockholm, Sweden, Taguchi’s experimental design model is extensively applied by the manufacturing and production industries to systematically simulate different system states through altering controllable and uncontrollable variables to ensure system reliability and robustness. Managing an IT infrastructure complexity in a systematic way to assess the risks is a major challenge. This research paper proposes a novel IT infrastructure security risk assessment methodology inspired by the Taguchi’s experimental design model. The proposed methodology is capable of rating and ranking impact of controllable and uncontrollable infrastructure parameters in the form of threats against the system. The result of the assessment is fed into a mitigation process where the system is hardened by eliminating the highest ranking risks. 11 30 2019 1496 1501 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4315.119119 https://www.ijitee.org/portfolio-item/A4315119119/ Dept. of Civil Engg, GNDEC Bidar, Karnataka, India Manoj Kumar* Suresh .G. Patil Dept. of Civil Engg, PDACE Kalburgi, Karnataka, India This paper presents the behavior of geopolymer concrete with small and big fibers. The aluminosilicate materials used for geopolymer concrete are fly ash and GGBS. For this study standard cube, cylinder and beam specimens are casted and tested to investigate compressive, split tensile and flexural strengths. The experimental results shows that incorporation of steel fibers for the geopolymer mixes improve the strength properties. Few models are generated to estimate the strengths with alliance of cube compressive strength. 11 30 2019 848 852 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4350.119119 https://www.ijitee.org/portfolio-item/A4350119119/ Electrical and Electronics Engineeringt, Don Bosco Institute of Technology, Bangalore. Affiliated to Visvesvaraya Technological University, Belagavi, Karnataka, India. Prasanth Venkaatreddy* Subhash Kulkarni Electronics and Communication, PESIT Bangalore South Campus, Affiliated to Visvesvaraya Technological University, Belagavi, Karnataka, India. Permanent-magnet (PM) motors are employed in numerous industrial control applications for their high efficiency, simple mechanism and low cost. In most of the applications, either the plant model is inaccurately defined or the plant parameters are prone to variations over period of time. Also, in most of the applications, have a requirement of good tracking as well as good disturbance rejection, two competing requirements. The controller should cater to the parameter variations as well as provide robust performance against external disturbances and hence requires a robust control approach towards designing a controller. A classical PID controller, which lacks robustness requirements is augmented by H∞ optimization based gain tuning to meet the robustness requirements. This paper discusses a PID controller design using H∞ optimization approach. Different performance goals for tracking and disturbance rejection are defined and PID gains are tuned to meet the goals in H∞ sense. A commercial Maxon RE35 motor is selected for modeling and simulation. 11 30 2019 4097 4102 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4352.119119 https://www.ijitee.org/portfolio-item/A4352119119/ Department of Electronics and Communication Engineering, MLR Institute of Technology, Hyderabad -500043, Telangana, India. K Jyothi* R Karthik Department of Electronics and Communication Engineering, MLR Institute of Technology, Hyderabad -500043, Telangana, India B. Anusha Department of Electronics and Communication Engineering, MLR Institute of Technology, Hyderabad -500043, Telangana, India. B Annapurna Department of Electronics and Communication Engineering, MLR Institute of Technology, Hyderabad -500043, Telangana, India. A Kiran Department of Electronics and Communication Engineering, MLR Institute of Technology, Hyderabad -500043, Telangana, India. K Soumya Department of Electronics and Communication Engineering, MLR Institute of Technology, Hyderabad -500043, Telangana, India N Harini Department of Electronics and Communication Engineering, MLR Institute of Technology, Hyderabad -500043, Telangana, India. Attendance is taken at various places like schools, colleges for students and login logout time for employees in industries and offices. The existing system is done on paper and it consumes lots of papers and it is of manual work. It has less accuracy. In order to reduce the usage of paper RFID based attendance system is used. It is an automated attendance system where Rfid tags are used. This is the easy way to take the attendance without any physical contact. In this project we use RFID Reader, RFID Tags, LCD display, which are interfaced withATMEGA8 Microcontroller. The Rfid tags are given to the students, with their roll numbers as their tags. When the tag is placed near the reader, the data is transferred to reader due to the radio frequencies. Reader then transfers data to the microcontroller. Microcontroller checks for the data continuously, if any data is received, microcontroller compares the data in data base. It eliminates the duplicate entry of data and reduces errors in time and entries. 11 30 2019 853 855 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4353.119119 https://www.ijitee.org/portfolio-item/A4353119119/ Minin Nizhny Novgorod State Pedagogical University Garina E.P* Garin A.P Minin Nizhny Novgorod State Pedagogical University Romanovskaya E.V. Minin Nizhny Novgorod State Pedagogical University Andryashina N.S Minin Nizhny Novgorod State Pedagogical University Smirnova Z.V. Minin Nizhny Novgorod State Pedagogical University Mizikovsky I.E. National Research Nizhny Novgorod State University named after N.I. Lobachevsky The article considers modern approaches to improvement of production processes at the enterprise, practical application of production development methods, issues of realization of production technologies in industry. A necessary condition for development of production is disclosed - increasing the efficiency of using technological potential through realization of the potential for strengthening its control systems. The article is devoted to studying the variability of application of adaptive methods for improvement of processes, technologies, and systems. Also, the effectiveness of development methods is determined by the example of their adaptation to the practice of the economic entity. Solutions to increase the competitiveness of enterprises cover the sphere of production, development of organizational systems of management, and "Kaizen" system. Analysis of practice and modern approaches to increase competitiveness is carried out in the context of implementation of solutions by domestic producers. In the course of the research it is determined that to solve tasks, it is necessary to develop the technological process of manufacturing product, as well as elements of the production system in part maintenance and operation of equipment. It is proved that the implementation of production development program will increase the utilization of production capacities, reduce the cost of production, change the indicator of time maintenance of production machines and equipment, and reduce used production area. 11 30 2019 3398 3401 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4354.119119 https://www.ijitee.org/portfolio-item/A4354119119/ Minin Nizhny Novgorod State Pedagogical University Garina E.P.* Garin A.P. Minin Nizhny Novgorod State Pedagogical University Romanovskaya E.V. Minin Nizhny Novgorod State Pedagogical University Andryashina N.S. Minin Nizhny Novgorod State Pedagogical University Chelnokova E.A. Minin Nizhny Novgorod State Pedagogical University In conditions of competitive environment and technological progress requirements for rational organization of enterprise activity and its technological development are tightened.The purpose of the study is to analyze a production technology and determine directions for increasing production efficiency in terms of economic and environmental efficiency. Object of study — Production Association of Polished Glass JSC AGC “Borsky Glass Factory”. Subject of the study — workshop organization in the enterprise management system. Research methods — method of comparison and analogy, method of economic analysis. The practical significance lies in the possibility of using research results to improve organization of the enterprise and its production sites. These studies allow to draw conclusions about used technology of production on the example of a separate business unit, main technological parameters of processing raw materials, and output of products. Identified problems relate to the issues of economic efficiency of production of its environmental consequences, and directions of improvement are aimed at their solution. 11 30 2019 2101 2106 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4355.119119 https://www.ijitee.org/portfolio-item/A4355119119/ Electrical and Electronics department,Sree chandrasekarendra saraswathi viswa maha vidyalaya University,kanchipuram, India. S. Bharathi P. Venkatesani Electronics and communication department,Sree chandrasekarendra saraswathi viswa maha vidyalaya University,kanchipuram, India. In this paper synthetic image segmentation is carried out by Possibilistic Rough kernel intuionistic Fuzzy c means (PRIKFCM) technique which is proposed in this paper. The results obtained through the proposed method is compared with FCM, PFCM, RKFCM segmentation techniques. The segmentation accuracy is more than the segmentation accuracy yielded by other methods. PRIKFCM is a hybrid technique incorporate in it the concepts of kernelized distance,rough ses,possibilistic and intuionistic concepts in it.the advantage of the proposed method is more due to the hybridization approach. 11 30 2019 4738 4743 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4356.119119 https://www.ijitee.org/portfolio-item/A4356119119/ PhD Scholar, ASPESS, Amity University, Noida, India Anulekha Dey* Malika Sharma Assistant Professor, ASPESS, Amity University, Noida, India This study is pursued to find the effectiveness of Structured Aquatic Training Program for children with Cerebral Palsy. Sensory profile was used to assess the effectiveness of endurance and tone, of14 Children with CP average of age nine years, purposively selected from Asha AWWA school at Delhi, India. Participants were divided into Experimental and Control groups. Result of Two Way ANOVA reflects positive accelerated transformation only in experimental group, showing moderate to considerable benefits through the 9 weeks training program. In addition, individualized scale of improvement was also studied, which resulted into minor to major enhancement of endurance and tone among all the experimental group participants. Hence a prolonged Structured Aquatic Training Program (intervention) is off paramount to get the best results. These findings also enhance the preceding research work based on aquatic intervention. 11 30 2019 856 861 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4357.119119 https://www.ijitee.org/portfolio-item/A4357119119/ Department of Electronics and Communication Engineering, Scholar JNTU Hyderabad, Assistant Professor in ECE ,Vardhaman college of Engineering , India. Ch. Rama Krishna* Dr. G.A.E. Satish Kumar Professor, Department of ECE, Vardhaman College of Engineering, Hyderabad, India. Dr.P. Chandra Sekhar Reddy Professor, Department of ECE, JNTU Hyderabad college of Engineering, Hyderabad, India. To Suppress Conventional Narrow Band Communication Technologies From The UWB Frequency Band An Integrated Triple Notch Bands Compact UWB Antenna Is Proposed. Band Notches Are Wimax (3.1-3.8 Ghz) ,WLAN(4.8-5.825 Ghz) And X Band (6.5-7.5 Ghz).To Attain UWB Frequency Band 2.9-14.5 Ghz From Compact UWB Antenna Introduced Slots In A Rectangular Patch With DGS. The Projected Compact UWB Antenna Arrangement Is Made-Up On FR4 Substrate With VSWR Is Less Than 2 Except For Selected Notched Bands. The Proposed UWB Design Is Suitable For Impenetrable Surroundings For Wimax/WLAN/X Band Dense. The Partial Defective Ground Structure Is Proposed To Improve Impedance Matching And Impedance Bandwidth Is Utilized. 11 30 2019 1097 1100 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4358.119119 https://www.ijitee.org/portfolio-item/A4358119119/ School of Electrical Engineering, KIIT University, Bhubaneswar, India. Byamakesh Nayak* Sangeeta Sahu School of Electrical Engineering, KIIT University, Bhubaneswar, India. Now-a-days most of the appliances and machine works on AC power. If AC power is unavailable for a short period of time, then during that period we need to supply AC power by converting the stored DC power. This can be possible using an Inverter. Inverters can be of multi-phase i.e. 3phase, 5phase, 6phase and so on. Since inverters have wide application in industries and HVDC transmission lines, the improvement in the output voltage and the reduction in harmonics are of utmost importance. In this paper a detailed analysis of harmonics and THD in a five phase inverter with different conduction angle along with the derived mathematical equations has been presented. A comparative study between three phase and five phase inverters at different conduction angle has been presented. 11 30 2019 1519 1523 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4359.119119 https://www.ijitee.org/portfolio-item/A4359119119/ School of Computer Science, University of Petroleum & Energy Studies, Dehradun, India. Dr. Ekta M. Upadhyay* With increasing technological advancements, there is a need for automation in this ever-evolving world. This may result in improved efficiency, faster work and enhanced capabilities. Sketch-to-image translation is an image processing application that can be used as a helping hand in a variety of fields. One of these is the utilization of Generative Adversarial Networks to guide edges to photographs, with the assistance of image generators and discriminators who work connected to produce realistic images. We have also incorporated Histogram of Oriented Gradients (HOG) as a feature/image descriptor. The HOG technique counts the gradient orientations to differentiate the target and the background. Support Vector Machine (SVM) is the classifier used for classification. This HOG and SVM model can be improved, altered and executed as multi-program software. 11 30 2019 2414 2417 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.A4360.119119 https://www.ijitee.org/portfolio-item/A4360119119/