-4d90550d17f4602e089-6a9f 20220321033236057 beie:beie director@blueeyesintelligence.org WEB-FORM International Journal of Innovative Technology and Exploring Engineering IJITEE 22783075 10.35940/ijitee https://www.ijitee.org/ 03 30 2020 9 5 Department of Applied Mathematics, M. J. P. Rohilkhand University, Bareilly, India. Madan Lal* Yantish Dev Jha* Department of Applied Mathematics, M. J. P. Rohilkhand University, Bareilly, India. Haris Alam Zuberi Department of Applied Mathematics, M. J. P. Rohilkhand University, Bareilly, India. The present research paper concerns with a two phase fluid flow, consists an acentric plasma layer region free from red cells and a central core region represented by Hershel – Bulkley fluid through a bell shaped stenosed artery. Mathematical expressions for characteristics of blood flow namely core velocity (uc), peripheral velocity ( up), shear stress at wall ( ) and total volumetric fluid flow rate (Q) have been estimated and depicted graphically . The effect of shape parameter peripheral layer viscosity, on these characteristics has been depicted with graphs. It has been noticed that the fluid flow rate (Q) and shear stress at wall ( ) decreases as the increases of peripheral layer viscosity. 03 30 2020 35 38 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E1966.039520 https://www.ijitee.org/portfolio-item/E1966039520/ Research Scholar, Visvesvaraya Technological University, Belagavi, Karnataka, India. Tejashwini N* Dr. D R Shashi Kumar Head of Department of Computer Science & Engineering, Cambridge Institute of Technology, Bengaluru, Karnataka, India Dr. K Satyanarayana Reddy Head of Department of Information Science & Engineering, Cambridge Institute of Technology, Bengaluru, Karnataka, India With the increasing adoption of application running over wireless networking system, there is also an increasing security concern in it. Review of existing security protocols in wireless networks shows that they are highly specific to adversaries and hence they cannot be applicable with the dynamic state of network vulnerabilities. Apart from this, it was also explored that public key encryption requires a drastic change in its design methodology in order to make it more resource friendly for increased network lifetime. Therefore, this manuscript presents a novel framework that develops an enhanced model of public key encryption using algebraic structure that can generate an elite secret key. The study also introduces a design of an efficient trapdoor function which renders maximum resiliency towards different forms of lethal attacks as well as adhere to maximum security standards in wireless network. The study outcome shows that proposed system out performs frequently used existing security standards in many aspects. 03 30 2020 39 45 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E1967.039520 https://www.ijitee.org/portfolio-item/E1967039520/ Assistant Professor, KIET Group of Institutions, Delhi-NCR, Ghaziabad. Yasir Karim Saif A Khan Assistant Professor, KIET Group of Institutions, Delhi-NCR, Ghaziabad. D. K. Sharma Dean Academics, MIET Group of Institutions, Meerut Ravindra Gautam Associate Professor, KIET Group of Institutions, Delhi-NCR, Ghaziabad. Sanjeev Singh Professor, KIET Group of Institutions, Delhi-NCR, Ghaziabad. Detoriation of environment and depletion of natural resources is a major concern of the hour. Concrete not being an environmental pro material, a lot of work needs to be done on its sustainability parameters. Because of infrastructural growth to cater population needs, huge quantities of concrete are required. Since we all know that aggregates form around 75% of concrete volume, the quantities of aggregate required for the production of such huge quantities of concrete is immense. Hence a sustainable solution for the alternative of aggregate is urgently required to fulfill the shortage of aggregates. Keeping in mind the above problem the present work aims at finding a probable solution for utilizing the recycled aggregate obtained from destruction of hardened concrete. Since literature review suggested the poor performance of the concrete produced from recycled aggregate but did not give the best optimum situation in which it can be used. So the study was carried out on six different mixes containing natural aggregates and recycled aggregate for three different grades of concrete and both fresh and hardened properties of concrete was studied. No admixture was used for making concrete in any of the mixes. The comparative study showed that if recycled coarse aggregate is used with stone dust it gives better result and Total fines if used with natural coarse aggregate gives better result. 03 30 2020 350 357 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E1970.039520 https://www.ijitee.org/portfolio-item/E1970039520/ Research Scholar, Dept. of CSE, BGSIT, BG Nagar, Mandya, INDIA. Shashikala S V* Dr. Ravikumar G K Professor & Head, R & D Center, Dept. of CSE, BGSIT, BG Nagar, Mandya, INDIA. Currently new topologies have been introduced in many data centers that provide location independence and larger aggregate bandwidth by making different multiple paths in the network core. This work proposes transport of data from TCP (Transmission control Protocol) to multi-path TCP (MPTCP) for maximum utilization of paths over network flow. In spite of its added advantages, some sort of work on MPTCP to be carried out on cloud environment and further, efficient way of using MPTCP on real-world cloud application still looks like unclear problem. Further, the work also concerned on MPTCP usage in most effective and feasible way for cloud and data center environments over various conditions on network. The experiment is conducted by clustering the public cloud data using Gaussian Mixture Model (GMM) based Expectation and Maximization (EM) algorithm and communicated over a network using MPTCP. The results shows that the proposed method yields high-speed data transfer and low communication delay when compare to traditional TCP technique. 03 30 2020 46 52 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E1973.039520 https://www.ijitee.org/portfolio-item/E1973039520/ School of Electrical Science, VIT University, Vellore, India. Derick Mathew Chinnappa Naidu Rani* School of Electrical Science, VIT University, Vellore, India. The rate of utilization of renewable energy sources is increasing nowadays. Since renewable energy source depends on environmental conditions, its output will vary according to the variations of weather condition. In order to get a steady output at the load side, an inverter is required that shows the property of bucking and boosting the input voltage by eliminating the input disturbances. This paper proposes one cycle controlled buck-boost inverter. It has the ability to buck and boost the input voltage by rejecting its disturbances. The detailed Matlab/Simulink model has been used to verify the performance of the system. Three test conditions are used to substantiate the performance of the proposed inverter such as the ability to buck and boost the input voltage, rejects the disturbances in the input side. Test results validate that the proposed inverter used for the applications where input varies. 03 30 2020 58 63 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E1982.039520 https://www.ijitee.org/portfolio-item/E1982039520/ Dept. of CSE, Institute of Aeronautical Engineering, Hyderabad, India. Mrs. Guduri Sulakshana Ms. R Siva Jyothi* Dept. of CSE, KSRM College of Engineering, Kadapa, India. Ms. Aluri Lakshmi Dept. of CSE, Institute of Aeronautical Engineering, Hyderabad, India. Toxic online content (TOC) has become a significant problem in current day’s world due to uses of the internet by people of distinct culture, social, organization and industries background and followed Twitter, Facebook, WhatsApp,Instagram, and telegram, etc. Even now, there is lots of work going on related to single-label classification for the text analysis and to make less comparative to errors and more efficient. But in recent years, there is a shift towards the multi-label classification, which can be applicable for both text and images. But text classification is not much popular among the researchers when compared to the grading for images. So, in this work, we are using the dataset which is going to be a short messages dataset, to train and develop a model which can tag multiple labels for the messages. Hate speech, and offensive language is a key challenge in automatic detection of toxic text content. In this paper, to contribute term frequency–inverse document frequency(Tf-Idf), Random forest, Support Vector Machine (SVM),and Bayes Naïve classifier approaches for automatically classify tweets. After tuning the model giving the best results, it achieves an Efficient accuracy for evaluating test data analysis. In this contribution of work also moderate and encapsulate paradigms which will communicate and working between the user and Twitter API. Instead of using the traditional techniques like Bag of words or word counter, a new technique which uses Tf-Idf is built to find the similarity, and the text is transformed into the vectors using Tf-Idf, and this is used to train the model using supervised learning technique along with the labels from the dataset. The accuracy of the model is quite good and more efficient with better results. 03 30 2020 136 139 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E1985.039520 https://www.ijitee.org/portfolio-item/E1985039520/ Research Scholar, Electronics & Communication Department, C U Shah College of Engineering and Technology, Wadhwan, Gujarat, India. Renuka Makwana* Dr. VedVyas Dwivedi Professor, EC department, Faculty of Technology and Engineering, C U Shah University, Wadhwan, Gujarat, India. Prarthan Mehta Electronics & Communication Department, Faculty of Technology and Engineering, D D University, Nadiad, Gujarat, India. With the wireless communication advances in the recent years, the level of RF energy present in the environment rises day by day. Only fractional part of RF energy presented is used, on contra, the remaining RF energy is the wastage in the form of waves that become challenging issue to harvest. Here, one of the RF harvesting systems known as Rectenna is implemented. Star shaped Dielectric Resonator Antenna (DRA) is used as receiver to collect RF energy at ISM frequency band (2.45 GHz) from atmosphere. The received RF energy is fed to Full wave rectifier circuit. The parametric study shows the 24.733 dBm power is harvested for 30 dBm input power is fed. The maximum 81.67 % RF to DC conversion efficiency is achieved. 03 30 2020 279 283 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E1986.039520 https://www.ijitee.org/portfolio-item/E1986039520/ Professor, Mechanical Engineering Department Dr.Babasaheb Ambedkar College of Engineering Nagpur, India. Dr. Sunil V. Prayagi Dr. Nischal P. Mungle Assistant Professor, Mechanical Engineering Department, Dr.Babasaheb Ambedkar College of Engineering, Nagpur, India Dr. Mahendra P Nimkar Assistant Professor, Mechanical Engineering Department, Dr.Babasaheb Ambedkar College of Engineering, Nagpur, India This experimental investigation aims to study the effect of inlet fluid on flow and heat transfer characteristics for buoyancy driven flow in square tube fitted with twisted strips. Twist pitch, heat supply, inclination of the tube and Inlet fluid temperature were changed during experimentation. The study revealed that with increase in pitch the percentage enhancement in heat transfer coefficient decreases. With decrease in the pitch the flow rate decreases. Moreover with increase in inlet fluid temperature both heat transfer coefficient and flow rate tends to decrease. Perhaps it is due to higher heat loss at the tube surface which results in reduction in Rayleigh number. 03 30 2020 358 359 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E1990.039520 https://www.ijitee.org/portfolio-item/E1990039520/ Department of Zoology, Centurion University of Technology and Management, Odisha, India. Sitaram Swain* Tapasi Upadhyaya Department of Zoology, Centurion University of Technology and Management, Odisha, India. Ayurveda is known as the oldest practice system in traditional medicine. This medicine system science is closely associated with social, psychological and spiritual with the living society. From ancient period, many works have been done and documented in Ayurveda and charaka Samhita. World Health Organisation reported that more than six billion people depend primarily on ethno medicine. Now it is considered as an important alternative therapy among known other practices. Animals and their by-products form important ingredients have been considered for the preparation of medicine. Since seventh century, Ayurvedic bhasmas are known in India for curing of many chronic ailments. Bhasmas are commonly known as ‘biological nanoparticles’ and it is derived from animal's derivatives through incineration. These bhasmas have been orally administered by mixing with honey to reduce the adverse effect of these drugs. In this study there six bhasmas and honey samples were taken for X-Ray fluorescence (XRF) spectroscopy analysis. Presence of these elements has showed their significance in therapeutically potent even in low doses. Now it has given novel health care look in Ayurved for tribal areas as well as modern society. 03 30 2020 904 908 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E1991.039520 https://www.ijitee.org/portfolio-item/E1991039520/ Information Systems Management Department, BINUS Graduate Program – Master of Information Systems Management, Bina Nusantara University, Jakarta Sfenrianto Raden Aditya Bayu Pratama Information Systems Management Department, BINUS Graduate Program – Master of Information Systems Management, Bina Nusantara University, Jakarta Arie Handoko Information Systems Management Department, BINUS Graduate Program – Master of Information Systems Management, Bina Nusantara University, Jakarta Bagus Afan Herlambang Information Systems Management Department, BINUS Graduate Program – Master of Information Systems Management, Bina Nusantara University, Jakarta Usability and quality information has an important role in a website. To measure the use and quality of the information this research carries out on the pedulisehat website. Customer Relationship Management (CRM) uses chatbot. The variables used in this study are information quality and chatbot usage services. The results showed good results on the pedulisehat.id chatbot website, from the data collected produced two variable quality information with a yield of 77.8% and usability with a result of 63.1%. There is still a need to improve the quality of information and the use of the pedulisehat.id website. 03 30 2020 53 57 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E1994.039520 https://www.ijitee.org/portfolio-item/E1994039520/ Associate Professor, Department of Computer Science, Government Arts College (Autonomous), Salem. Dr. K. Akilandeswari Mr. L. Baranivel* MCA, Department of M.Tech, VIT, Vellore, India. Mr. G. Anwar Basha Associate Professor, Department of Computer Science, Government Arts College (Autonomous), Salem. Basically large networks are prone to attacks by bots and lead to complexity. When the complexity occurs then it is difficult to overcome the vulnerability in the network connections. In such a case, the complex network could be dealt with the help of probability theory and graph theory concepts like Erdos – Renyi random graphs, Scale free graph, highly connected graph sequences and so on. In this paper, Botnet detection using Erdos – Renyi random graphs whose patterns are recognized as the number of connections that the vertices and edges made in the network is proposed. This paper also presents the botnet detection concepts based on machine learning. 03 30 2020 1037 1040 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E1996.039520 https://www.ijitee.org/portfolio-item/E1996039520/ Associate Professor, Dept of Computer Science, Govt Arts College (Autonomous), Salem Dr. K. Akilandeswari Mr.G. Anwar Basha an independent researcher with 10 years of teaching experience. Mr.L. Baranivel pursuing MCA, M.Tech, research at VIT, Vellore. This paper proposes three-stage botnet detection technique based on the anomaly and community detection. The first stage is a pragmatic node based distributed approach of sparse graph sequences. The second stage detects the bot from sparse matrix and correlations of interactions among the node. In the third stage, random graph is evaluating the performance of the bots and verified with both odd and even types of nodes. The same is extended and verified through Obrazom triple connected graphs. This verification is helpful to identify the aggressive bots through the optimized pivotal nodes. Machine Learning based Botnet Detection techniques are implemented in various levels like centralized and distributed level of networks. We can apply this three-stage bot detection in large-scale data. 03 30 2020 571 576 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E1997.039520 https://www.ijitee.org/portfolio-item/E1997039520/ Associate Professor, Department of ECE, Saveetha School of Engineering, SIMATS, , Chennai, India. M. Reji A. Mohammed Irfan UG Scholar, Department of ECE, Saveetha School of Engineering, SIMATS, Chennai, India. Biometrics is used for identification in this article. This paper also describes how biometrics can leverage the boundless computational resources of the cloud and the striking properties of flexibility, scalability, and cost reduction to reduce the cost of the biometric system requirements of different computational resources (i.e. processing power or data storage) and to improve the performance of the processes of the biometric systems (i.e. biometric matching). The human footprint is known to have the new characteristics that could be used to identify the criteria for determining an individual's identity. The main objective is to develop image processing algorithms capability on a limited computing platform. We created the embedded framework that recognizes and accepts a person's identity. The paper's main purpose is to update the characteristics of the details, needs, and reports of the patient behind the implementation of a real-time base system. The foot picture of the human is segmented, and its key points are placed. The foot is arranged and trimmed, clipped according to key points, created and dimensioned. Colour establishes a crucial role in numerous footprint recognition applications. Due to the drawback of real-time software and Raspberry Pi technology, this effort based on lightweight methodology was primarily used. 03 30 2020 2250 2252 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2088.039520 https://www.ijitee.org/portfolio-item/E2088039520/ Department of CSE, College of Engineering Bhubaneswar, BPUT, Rourkela, India Anita Sahoo Tushar Kanta Samal* Department of CSE & A, Sambalpur University Institute of Technology, Sambalpur, Ambarish Panda Department of EEE , Sambalpur University Institute of Technology, Sambalpur, India, Keshar Kumari Department of CSE, College of Engineering Bhubaneswar, BPUT, Rourkela, India Wireless Body Area Network (WBAN) is an exclusively designed Wireless Sensor Networks that used in today’s health-care system. The central challenge in WBAN is to transfer the medical data with limited energy and with high reliability. The IEEE 802.15.4 MAC Protocol is a standard model used to consume less energy by providing low data rate. This paper aimed to present a novel protocol PD-MAC, an enhanced version of IEEE 802.15.4 to achieve the above goal. The main objective of this protocol is to transmit the packets according to their priorities. It also improves the retransmission and packet drop process by introducing an additional slot to define Starvation Index in the super-frame of IEEE 802.15.4. A node has to start its transmission when the timer is set to zero. A node has to sense the channel status before transmission begins. The data are transmitted according to their priorities only when it senses the free channel. However if the channel is not free then retransmission of packet will be carried out and in each retransmission process the starvation index increments the priority of the packet. When the packet priority raises to high then it transmits the packet by considering it as high emergency packet. For energy efficiency a max limit is define to retransmit a data packet. This protocol has been simulated using Castalia 3.2 environment and the result validate that our proposed protocol provides better service in terms of least Packet Delay and lowest Energy Consumption to its counterparts. 03 30 2020 64 69 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2094.039520 https://www.ijitee.org/portfolio-item/E2094039520/ Assistant Professor, Department of EEE, Kongu Engineering College, Perundurai, India. Mrs. R. Sasikala* M. Rakshana Department of EEE, Kongu Engineering College, Perundurai, India T. Thinaa Department of EEE, Kongu Engineering College, Perundurai, India. P. Thirupponvel Department of EEE, Kongu Engineering College, Perundurai, India. D. Vasanth Department of EEE, Kongu Engineering College, Perundurai, India. The main intention of this project is to automate the bar bending process using pneumatic system to reduce the cost and enhance the productivity. Conventional Methodologies involve major labour work, layout setup, high cost etc. Hence to reduce labour cost, Automation is preferred. Existing hydraulic system are cost high enough, so to make cost effective, Pneumatic bar bending system is proposed here. Sample bar is taken about 8mm and pressurized with a compressor of about 25-30mm. Entire test setup size assembled is 2*2 square feet. This project discuss about the construction and process of pneumatic based bar bending system, also the associated practical implications during implementation. 03 30 2020 1345 1348 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2097.039520 https://www.ijitee.org/portfolio-item/E2097039520/ Department of Computer Science & Engineering from SRM Institute of Science & Technology, Chennai, India. Jayakrishna Natarajan Krishanu Das Department of Computer Science & Engineering from SRM Institute of Science & Technology, Chennai, India. Ronak Harish Patil Department of Computer Science & Engineering from SRM Institute of Science & Technology, Chennai, India. Mr. R B Sarooraj Assistant Professor, Department of Computer Science and Engineering, SRM Institute of Science and Technology, Chennai, India. The insurance companies around the world work with very simple formula and have a very specific agenda. They convince people to deposit money on their name to the insurance company, in return the people are promised to be given a large sum of amount when they get an expensive hospital bill or when they meet with an accident. This amount to be paid, is generally taken from people on a monthly basis. Customers are convinced to join such a scheme as it is very tempting and the prospect of money troubles taken care of for nothing in a time of crisis seems wonderful. Insurance companies on the other hand pray that nothing happens to the customers or their families, so that they don’t come looking for compensation. The money that they collect from new insurance holders is what they use to pay of the losses. Data analysis is the process of understanding the behaviour of a certain dataset when measured against certain static quantities. In this paper we are proposing to use Data science and in particular regression analysis, to analyse a dataset of patients and devise a method to predict their insurance amount. There are various types of learning and broadly speaking linear regression comes under supervised learning. We have a dataset consisting of over 1300 patients each with 7 characteristics like smoker or not, do they have children, their age, sex, BMI, etc. We are also proposing to devise methods to overcome the shortcomings of Linear regression like multicollinearity and homoscedascity, and perform the required data cleaning. 03 30 2020 1077 1081 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2098.039520 https://www.ijitee.org/portfolio-item/E2098039520/ Research Scholar, Department of Computer Science and Technology, Sri Krishnadevaraya University, Ananthapur, Andhra Pradesh, India. Mr. Subhash Babu Bathala* Dr. Muthuluru Nagendra Professor, Department of Computer Science and Technology, Sri Krishnadevaraya University, Ananthapur, Andhra Pradesh, India. In the recent years, the scale of online transaction has increased considerably. Subsequently, this has also increased the number of fraud cases, causing billions of dollars losses each year worldwide. Therefore, it has become mandatory to implement mechanisms that are able to assist in fraud detection. In this work, the use of Ensemble Genetic Algorithm is proposed to identify frauds in electronic transactions, more specifically in online credit card operations. A case study, using the dataset containing transactions made by credit cards in September 2013 by European cardholders, is used. This dataset presents transactions that occurred in two days, where we have 492 frauds out of 284,807 transactions. The presented algorithm achieves good performance in fraud detection as compared to the other machine learning algorithms. The results show that the proposed algorithm achieved good classification effectiveness in all tested instances. 03 30 2020 1349 1357 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2122.039520 https://www.ijitee.org/portfolio-item/E2122039520/ pursuing bachelor degree program in Electrical and Electronics Engineering in National Engineering College, India, A. Meenakshi* P. Vigneshwari pursuing bachelor degree program in Electrical and Electronics Engineering in National Engineering College, India M. Vijayakumari pursuing bachelor degree program in Electrical and Electronics Engineering in National Engineering College, India M. Nivetha pursuing bachelor degree program in Electrical and Electronics Engineering in National Engineering College, India K. Kumar Assistant Professor in department of Electrical and Electronics Engineering in National Engineering College, India This paper proposes the look of automatic fish feeder system victimization Raspberry pi. The fish home owner of the pet fish area unit usually concerned once the area unit removed from home surroundings as a result of they may not supply the fish on regular or proper time. Each cause food hunger and food endanger the physical condition of the fish and ends up in poor water quality in indoor fish tanks. Therefore, it's of excellent importance to seem for fish feeders which may be terribly helpful for the fishermen. This work is supposed to supply a fish feeder gadget employing a microcontroller and large natural raspberry pi based and large pure application to consolation distressed fish house holder in feeding their fish on time. This technique defeats the case of fish dying because of fish feeder malfunction. With this vogue, the fish owner will screen the fish tank for correct functioning of the fish feeder. Additionally, the person can set the agenda for feeding the fish through the internet application. 03 30 2020 70 72 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2123.039520 https://www.ijitee.org/portfolio-item/E2123039520/ Computer Science and Engineering department, Rayalaseema University, Kurnool, Andhra Pradesh, India Kovuru Vijaya Kumar* Ch GVN Prasad Department of Computer Science & Engineering, Sri Indu College of Engg & Tech, Hyderabad. India Software enhances the working capability of any business. Developing such a software entrusts the developing organization to build defect free software. In this context we have used PC1 dataset(NASA dataset) which has sufficient parameters for analysis. Intelligent techniques using different methodologies have been applied exhaustively on the PC1 data to find out the best intelligent technique for software defect. As the PC1 data is highly imbalanced data, there was biasness in the prediction of the intelligent techniques. Hence, to overcome this issue, in this paper we tried to propose best balancing method along with the intelligent technique to predict the software defect accurately. 03 30 2020 73 79 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2124.039520 https://www.ijitee.org/portfolio-item/E2124039520/ Research Scholar, Department of Mechanical Engineering, Sri Satya Sai University of Technology and Medical Sciences, Sehore, Madhya Pradesh, India Guruji Ramakrishna Dr. G.R. Selokar Registrar and Professor, Department of Mechanical Engineering, Sri Satya Sai University of Technology and Medical Sciences, Sehore, Madhya Pradesh, India In view of the growing normal concerns, bio composite delivered out of customary fiber and polymeric tar, is one of the late headways in the business and comprises the present degree of experimental work. The utilization of composite materials field is expanding bit by bit in designing. The composite comprises of fundamentally two stages for example grid and fiber. The availability of trademark fiber and effortlessness of amassing have allured researchers worldwide to endeavour by local benchmarks open cheap fiber and to learning their reachability of fortress judgments and to what degree they satisfy the obliged specifics of extraordinary fortified polymer composite went for basic order. Fiber fortified polymer composites has various inclinations, for instance, by and large negligible exertion of creation, easy to create and preferred quality difference over immaculate polymer tars due with this reason fiber reinforced polymer composite used inside a combination of arrangement as class of structure material. This work depict the mechanical conduct of banana fiber fortified polymer composite with the remarkable references to the effect of fiber stacking and length of fiber on the properties of composites. 03 30 2020 1571 1585 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2128.039520 https://www.ijitee.org/portfolio-item/E2128039520/ Assistant Professor, Department of EEE, Dr. Mahalingam College of Engineering & Technology, Pollachi, Tamil Nadu. India. Mrs. K. Saranya* Ms. N. Priya PG Scholar, Department of Applied Electronics, Dr. Mahalingam College of Engineering & Technology, Pollachi, Tamil Nadu, India. Ms. M. Priyadharshini UG Scholar, Department of Electrical and Electronics Engineering, Dr. Mahalingam College of Engineering & Technology, Pollachi, Tamil Nadu, India. Ms. D. Vedhanivetha UG Scholar, Department of Electrical and Electronics Engineering, Dr. Mahalingam College of Engineering & Technology, Pollachi, Tamil Nadu, India. Mr. B. Lukman UG Scholar, Department of Electrical and Electronics Engineering, Dr. Mahalingam College of Engineering & Technology, Pollachi, Tamil Nadu, India. The proposed work analyses the employment of an ancient mathematical approach for building an arithmetic logic unit. Dissipation of power is one of the major driving issues in VLSI design. With the assistance of reversible gates, the power dissipation and loss of information can be minimized. The speed and accuracy of the Arithmetic Logic Unit depends on the propagator. Employing the traditional mathematics sutras technique within the computation algorithm reduces the complexity, duration and power. Due to the effect of environmental factors on the digital circuits, parity conserving technique is incorporated for providing error detection ability. The proposed work deal with the design and analysis of 32 bit reversible multiplier using ancient sutras with and without parity conserving technique .The planned work is implemented on Xilinx ISE Spartan 6E series of FPGA and simulation results are obtained. By using Cadence EDA tool, power, area and delay are calculated. The quantum parameters are calculated manually for 32-bit reversible multiplier using ancient technique with and without parity conserving technique using Urdhva Tiryakbhyam sutra. 03 30 2020 685 697 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2130.039520 https://www.ijitee.org/portfolio-item/E2130039520/ Department of Design, IIT Guwahati, India Susmita Nath* Rajiv Tiwari Department of Mechanical Engineering, IIT Guwahati, India Sougata Karmakar Department of Design,IIT Guwahati, India Stone polishing is one of the prominent informal sector in India (and world as well), where a large number of stone polisher works for long duration. Stone polishing workers manually operate the polishing machine either in standing or sitting position to carry out polishing activities, and are quite prone to various MSDs (repetitive strain induced) and thereby injuries and accidents. The present research therefore intends to explore the occurrences of WMSDs among the stone-polishing workers, and with utmost attempt to put forward some recommendations regarding corrective measures. Thirty (30) male stone polishing workers were selected from the Guwahati city of Assam. A comprehensive study on discomfort feeling was carried out by the modified Nordic questionnaire which considered the information about work nature and job stress. Rapid Entire Body Assessment (REBA) method was followed to evaluate whole body postural load and risks associated with the job. The finding of the study contributes to the understanding of the working conditions of the stone polishing workers and their physical discomforts at various body parts (mainly the lower back, knees and shoulder) due to awkward posture, repetitive motion, force exertion and sustained load handling during polishing activities. To overcome the problem arisen from aforesaid ergonomic stressors associated with stone-polishing work, ergonomic design intervention pertaining to modification of the equipment / hand tool like handle design, easy manoeuvrability, avoiding hand-holding of weight etc. have been proposed 03 30 2020 140 142 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2132.039520 https://www.ijitee.org/portfolio-item/E2132039520/ Assistant Professor, Department of Computer Science and Engineering, IFET College of Engineering, Villupuram, India Dr. D. Stalin David* Each year the computerized visual investigation of behavior gives a few key building pieces towards an mental vision framework. The capacity to see individuals and their activities by vision may be a key for a machine to interface vigorously and effectively with a human-computer association world. Due to various conceivable basic applications, "watching people" is at show a standout among the foremost energetic application spaces in vision. One of the foremost applications of visual investigation is peculiarity location in human exercises. An irregularity can show up in different shapes they speak to the different levels of human security issues. The location and following of bizarre exercises in observation have propelled an expanding level of concentration in computer vision.A novel approach to screen an variation from the norm within the open environment, here a generalized system is created for following the deviation by extricating the neighborhood highlights utilizing traits as neighborhood thickness and movement vector. In this moderate highlight movement is affected by typical behavior of people and quick include movement affected by the unusual behavior of people, for way better discovery it includes in computing the movement outline for flow of movement vectors within the scene by coordination the movement and appearances. The test investigation illustrates the viability of this approach in comparison with classifiers which is proficient to run and accomplishes 96% execution, in any case, for compelling approval of the framework is tried with standard UMN datasets and claim datasets. 03 30 2020 2196 2206 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2133.039520 https://www.ijitee.org/portfolio-item/E2133039520/ Associate Professor, Dept. of EEE, Sreenidhi Institute of Science and Technology-Ghatkesar, Hyderabad, India. Dr. G. Ramesh* Dr. V. Ranjith Babu Associate Professor, Dept. of EEE, Sreenidhi Institute of Science and Technology - Ghatkesar, Hyderabad, India. Dr. K. Kannan Associate Professor , Dept. of EEE, Sreenidhi Institute of Science and Technology - Ghatkesar, Hyderabad, India. Relieving congestion is a major technical issue in power transmission systems. In this paper, simultaneous placement of Thyristor controlled series capacitors (TCSC) and Voltage source converter based distribution generators (VSC-DG) are used for relieving congestion, minimize system cost and maintain the system in secure state. The system has been analyzed in three stages: (i) first stage, the congestions are made in different transmission network by overload and line outages, (ii) second stage, relieving congestion of transmission lines by using TCSC and VSCDG, where these devices are placed simultaneously at their optimal locations, (iii) comparative cost analysis is done between normal and congested systems. The proposed approach is tested on the 62-bus Indian power system network. The optimal solution of the test systems are obtained by genetic algorithm method and its solutions are compared with primal linear programming. All the results are validated through Power World Simulator and GA toolbox in MATLAB. 03 30 2020 80 86 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2135.039520 https://www.ijitee.org/portfolio-item/E2135039520/ Department of Aerospace Engineering, Periyar Maniammai Institute of Science and Technology, Vallam, Thanjavur-613403, Tamil Nadu, India R. Suresh* A. Ahamed Jasim Department of Aerospace Engineering, Periyar Maniammai Institute of Science and Technology, Vallam, Thanjavur O. R. Amal Nagdev Department of Aerospace Engineering, Periyar Maniammai Institute of Science and Technology, Vallam, Thanjavur B. Binny Sabin Department of Aerospace Engineering, Periyar Maniammai Institute of Science and Technology, Vallam, Thanjavur V. Nagaraj Department of Aerospace Engineering, Periyar Maniammai Institute of Science and Technology, Vallam, Thanjavur-613403, Tamil Nadu, India D. Jeyasimman Department of Mechanical Engineering, Periyar Maniammai Institute of Science and Technology, Vallam, Thanjavur-613403,Tamil Nadu, India The amphibious drone is the drone that is capable to travel in both air and water. In order to move through water, buoyancy force needs to be balanced and it challenges the structural integrity, it must have a better communication system with more penetration and less attenuation of the signal. To overcome that challenge the radio signal and Acoustic communication are widely used in the amphibious drone. In underwater, we have difficulty to get a clear view of positioning, for that there will be a mini system installed on the drone that will automatically calculate and sets their tracks to find the position, depth and time of the system. To achieve better communication an extra ground station will be installed. For controlling the motions of the drone in an effective manner the microcontroller is used as a flight controller for transmitting and resaving the user data. the aluminum alloy is used in the amphibious drone to avoid structural damage. Based on the above consideration the amphibious drone has been developed and measuring their efficiency in both air and water, after experimentation this amphibious drone may be used for coastal rescue, surveillance, oceanographic research etc. The entire design and development of amphibious drone are in progress and testing to be done in the future. 03 30 2020 284 287 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2137.039520 https://www.ijitee.org/portfolio-item/E2137039520/ Assistant Professor, Department of Statistics, Periyar University, Salem, TamilNadu, India Dr. A. Radhika* G. Priya Research Scholar Department of Statistics, Periyar University, Salem, TamilNadu, India Predictive modelling is a mathematical technique which uses Statistics for prediction, due to the rapid growth of data over the cloud system, data mining plays a significant role. Here, the term data mining is a way of extracting knowledge from huge data sources where it’s increasing the attention in the field of medical application. Specifically, to analyse and extract the knowledge from both known and unknown patterns for effective medical diagnosis, treatment, management, prognosis, monitoring and screening process. But the historical medical data might include noisy, missing, inconsistent, imbalanced and high dimensional data.. This kind of data inconvenience lead to severe bias in predictive modelling and decreased the data mining approach performances. The various pre-processing and machine learning methods and models such as Supervised Learning, Unsupervised Learning and Reinforcement Learning in recent literature has been proposed. Hence the present research focuses on review and analyses the various model, algorithm and machine learning technique for clinical predictive modelling to obtain high performance results from numerous medical data which relates to the patients of multiple diseases. 03 30 2020 288 297 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2138.039520 https://www.ijitee.org/portfolio-item/E2138039520/ Department of CSE, Sri Krishna College of Technology, Coimbatore, Tamil Nadu, India. Nandhini Alagarsamy* Priyankha Kailasam Department of CSE, Sri Krishna College of Technology, Coimbatore, Tamil Nadu, India. Mohamed Althaf Department of CSE, Sri Krishna College of Technology, Coimbatore, Tamil Nadu, India. Femila F. Assistant Professor, Sri Krishna College of Technology, Coimbatore, Tamil Nadu, India. Today's IT infrastructure, featuring a mobile workforce, IoT apps, digital business transitions and the cloud, is developing at a rate that exceeds traditional technology approaches capabilities. Network security has proven insufficient and lacks the visibility, control and intelligence necessary to meet changing needs. SDN became a subject of interest for academia and industry to discuss the network on-demand relevant aspects of applying real time network policy. The article is an assessment the security situation and what to do to strengthen it. In this paper we introduced SDN-based approach functionality not available in traditional approaches to security. This show how the proposed security architecture can be used fortify the overall protection of today's network. 03 30 2020 1359 1363 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2143.039520 https://www.ijitee.org/portfolio-item/E2143039520/ Research Scholar, Department Electronics & Communication, Dr. AIT, Bengaluru, Karnataka, India. Premakumar MN* Dr. Ramesh S Professor and Head, Department of Electronics & Communication Engineering, Dr. AIT, Bengaluru, Karnataka, India Wireless sensor networks (WSNs) are a promising technology for several industrial real-time and quotidian applications. Due to inherent limitations in WSN, security is a crucial issue. Cryptographic primitives are the fundamental components for designing security protocols to achieve security and privacy in WSN. Based on the review, it has been analyzed that the majority of security protocols for WSN are based on encryption and key distribution. The main open issue for these approaches concerns the establishment of security with an involvement of complex procedure, which presents considerable memory overheads, in contrast with the limited resources of sensor nodes. Therefore, the proposed work presents the modeling of an analytical approach for efficient encryption using temporal key management for robust security services to resists potential attacks and enables secure communication. The utilization of temporal-key mechanism in encryption operation offers additional support to routing operation in the network for secure data transmission with negligible computational overhead, thus preserving a higher level of energy savings in packet transmission operation. The validation of the proposed system performance is carried out a simulation study, which shows the effectiveness of the proposed system in terms of node remaining energy and processing time. 03 30 2020 143 148 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2147.039520 https://www.ijitee.org/portfolio-item/E2147039520/ Department of Organic Substances and technology of macromolecular compounds chemical-technological facultyAzerbaijan State Oil and Industry University, Baku, Azerbaijan Baku Shixaliyev Kerem* The sources of scientific literature on the research have been investigated, various approaches to the processing and modification of polymers have been analyzed and the main direction of the study have been identified. The changes in the properties of thin layers of industrially produced low-density polyethylene (LDPE) grades 10803-20 and 16603-011 operating under different climatic conditions have been studied. It has been determined that changes with different intensities occur in the structure and in this connection in the physical and mechanical properties of LDPE that was in operation at different time intervals and in different climatic conditions of the Absheron Peninsula and the Aran region: melt flow index of polymer alloy, tensile strength at break, relative extension and values of other indicators are deteriorating. In polymer samples is formed 24,2 – 28,6% of insoluble phase and as a result of oxidation up to  12,3 – 16,8% carbonyl, hydroxyl and other functional groups. 03 30 2020 1072 1076 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2156.039520 https://www.ijitee.org/portfolio-item/E2156039520/ Department of Mechanical Engineering, VR Siddhartha Engineering College, Vijayawada, AP, India G. Jamuna Rani* Y.V.Hanumatha Rao Department of Mechanical Engineering, Koneru Lakshmaiah Education Foundation,Vaddeswaram, Andhra Pradesh, India. B. Balakrishna Department of Mechanical Engineering, Jawaharlal Nehru Technological University, Kakinada, Andhra Pradesh, India. In daily life the demand for fuel is increasing and there is a need to find alternate fuels to overcome the environmental pollution problems. In this present study, experimentation was done on a diesel engine, at a speed of 1500 rpm by varying load from 0% to 100% using diesel and Madhca Longifolia biodiesel blends and the results were analysed to know the engine behaviour. Madhuca Longifolia biodiesel was prepared by using the acid catalyst method followed by transesterification process and then the tested biodiesel blended fuel samples MLB25, MLB0, MLB75, MLB100 were prepared by adding Madhuca Longifolia biodiesel in the rate of 25, 50, 75, 100 for diesel on volume basis. From the aquired results It was perceived that the performance of the engine was improved with MLB25 fuel sample compared to all other biodiesel blend fuel samples. And for all biodiesel blend fuel samples, the exhaust emissions like unburned hydrocarbons (ubhc), carbon oxide (CO), Smoke were reduced compared to the diesel and nitrogen oxide emissions (NOx) were increased slightly compared to diesel fuel. From the observed results, the MLB25 fuel sample suggested as alternate fuel in diesel engines in place of conventionsl diesel. 03 30 2020 298 302 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2158.039520 https://www.ijitee.org/portfolio-item/E2158039520/ Associate Professor, Electronics and Communication Engineering, Karpagam College of Engineering – Coimbatore Dr. Saminathan V Gobinath B Electronics and Communication Engineering,Karpagam College of Engineering – Coimbatore Naveenkumar N Electronics and Communication Engineering,Karpagam College of Engineering – Coimbatore Mouliram S Electronics and Communication Engineering,Karpagam College of Engineering – Coimbatore- Roobaan MT Electronics and Communication Engineering,Karpagam College of Engineering – Coimbatore In this world, that it would be a school, office, banks or apartment the only thing which we concern is safety and security. In this case, we are trying to keep our personal belongings safe like data, money and other important files to be secured from unauthorized persons. To overcome this technology, we are going to represent a fingerprint and algorithm-based security system that provides complete security and making unable to access for unauthorized person or someone else. Therefore, in this system, we are going to tighten the security for the unauthorized person. In this system, we are going to authorize the person's fingerprint who is going to open the locker or door. This fingerprint recognition is only done by the Arduino Uno to check for authentication. In this case, if the person has the correct fingerprint matched with the registered fingerprint, the door will automatically open otherwise the GSM module will be triggered and the registered person will get the concern alert message and the buzzer connected will be intimate the sound to alert the surroundings officially. Here we have done a few algorithms for more safety purposes. 03 30 2020 2389 2393 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2160.039520 https://www.ijitee.org/portfolio-item/E2160039520/ PhD of Architecture, Comparable to the academic degree of Doctor of Philosophy, Kyiv National University of Construction and Architecture, Kyiv, Ukraine Valentyna Praslova Yuliya Ryabets PhD of Architecture, Comparable to the academic degree of Doctor of Philosophy, Kyiv National University of Construction and Architecture, Kyiv, Ukraine Viktoriia Shchurova PhD of Architecture, Comparable to the academic degree of Doctor of Philosophy, Kyiv National University of Construction and Architecture, Kyiv, Ukraine Olena Zinovieva PhD of Architecture, Comparable to the academic degree of Doctor of Philosophy, Kyiv National University of Construction and Architecture, Kyiv, Ukraine Maryna Harbar PhD of Architecture, Comparable to the academic degree of Doctor of Philosophy, Kyiv National University of Construction and Architecture, Kyiv, Ukraine In the article relevant problems of colonization of other planets by mankind and development of extraterrestrial settlements are examined, in particular colonization of Mars and creation of Martian multifunctional base. Modern projects of leading space agencies for research and Mars colonization, shipping of equipment and the first settlers to the planet, and also projects of the first Martian habitats within the modern space technologies are discussed. In response to that natural and climatic conditions of the planet Mars which could substantially influence the formation and development of extraterrestrial multifunctional base are analyzed. Main natural and climatic factors such as high radiation background, absence of atmosphere, extreme temperature profile, low gravity, that have significant influence on formation of the Martian settlement on functional architectural and organizational levels are determined in the study. Functional model for establishment of an autonomic multifunctional base in extraterrestrial environment under the surface of the planet is proposed like the most fully satisfying the requirements for organization of extraterrestrial artificial environment for human's long-term stay considering extreme climate conditions of planet Mars and the desire to create comfortable conditions for livelihood of Martian pioneers. Basic blocks are determined and zones being parts of these blocks, which form the basis of the functional organization of extraterrestrial multifunctional complexes are detected. Possible options for functional connections between blocks and zones are analyzed. 03 30 2020 303 312 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2161.039520 https://www.ijitee.org/portfolio-item/E2161039520/ Electrical Engineering Department, National Institute of Technology, Jamshedpur, Jharkhand, India. Sushil Kumar Gupta* Sanjay Kumar Electrical Engineering Department, National Institute of Technology, Jamshedpur, Jharkhand, India. Rhea Srivastava Electrical Engineering Department, National Institute of Technology Jamshedpur, Jharkhand, India. Chelliboyina Prasanna Lakshmi Electrical Engineering Department, National Institute of Technology, Jamshedpur, Jharkhand, India. Megha Raj Lakshmi Electrical Engineering Department, National Institute of Technology, Jamshedpur, Jharkhand, India. With the ever increasing demand of power, the major concern that has aroused is the problem of voltage instability. Due to voltage instability several major power system failures and blackouts occur. Voltage stability thus becomes a necessity. For this FACTS devices like SVC, STATCOM, etc. are used. Load Flow analysis and Continuation Power Flow Analysis is done to identify the weak buses and FACTS devices are installed in these weak buses to enhance the voltage stability. This paper presents a network formulation of IEEE 30 Bus test system using MATLAB and PSAT software and then comparing the effect of SVC and STATCOM for voltage stability enhancement. 03 30 2020 215 220 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2163.039520 https://www.ijitee.org/portfolio-item/E2163039520/ Assistant Professor Dept. of Computer Engineering Sandip foundation (SITRC) Nashik, India Ankita Karale Priyal Patel B.E. Computer Engineering Sandip foundation (SITRC) Nashik, India Vaishnavi Khot B.E. Computer Engineering Sandip foundation (SITRC) Nashik, India Komal Bedarkar B.E. Computer Engineering Sandip foundation (SITRC) Nashik, India Shubhangi Shinde B.E. Computer Engneering Sandip foundation (SITRC)) Nashik, India Citizens or patients gratification has developed a paramount quantification for evaluating the quality of hospitals in health care. This quantification has evolved along with an incipient feature: the quality of care perspective of the patient. These days, knowledge put away in hospital databases are developing in an undeniably tremendously. Examining that knowledge is vital for restorative basic leadership. It has been broadly perceived that hospital knowledge examination can prompt an upgrade of social insurance by ameliorating the exhibition of denizens or patient administration. The number of days patient stay is generally utilized result evaluate for emergency clinic asset utilization and to screen the exhibition of the clinic. It avails in productive utilization of assets and offices. The forecast structure are visually examined utilizing exactness, precision and review. It has been discovered that utilizing Process Mining as an antecedent to arrangement gives better outcomes. Patient feedback comprise of the perspectives and assessments of patients and administration clients on the consideration that they have encountered. The survey is been taken on the patient entrance itself by responding to certain inquiries, and this input can be seen by hospital additionally to check what criticism is given and it’s right or wrong. Brought together organization just as database framework is remembered for proposed framework which isn’t accessible in any of the application accessible right now. 03 30 2020 577 581 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2166.039520 https://www.ijitee.org/portfolio-item/E2166039520/ Department of Instrumentation Engineering, D. V. V. P. F’s Dr. Vithalrao Vikhe Patil College of Engineering, Ahmednagar, India. Vandana Dhawane* Dr. Rajankumar S. Bichkar Principal Department of Electronics Vidya Pratishtan’s Kamalnayan Bajaj Institute of Engineering and Technology, Baramati, Pune, India. In this paper Automatic Generation Control (AGC) of a single-area thermal power plant without reheat turbine is introduced using a Proportional Integral Derivative (PID) controller. The gains of the controller are optimized using Genetic Algorithm (GA). The problem of tuning the PID controller is formulated as optimization problem with constraints on proportional, derivative and integral gains. The proposed algorithm uses Darwin’s law of natural selection and survival of the fittest to reach the optimal solution. The simulation results confirm the system’s ability to retain frequency while handling sudden load disturbances. The second part of the investigation includes robustness testing of the system against plant parameter variations. The results are verified and the system performance is found to be robust against parameter uncertainties. 03 30 2020 1047 1053 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2171.039520 https://www.ijitee.org/portfolio-item/E2171039520/ Ph.D Schlor, Dept. of Computer Science & Engineering, Himalayan University, Arunachal Pradesh, Eta Nagar India. Parmanand Prabhat* Dr. Syed Umar Professor, Dept. of Computer Science & Engineering, Himalayan University, Arunachal Pradesh, Eta Nagar India. Background/ purpose: organization that execution handling foundation on the Definite heart use paten virtualization technique to extenuate expenditure. majority organization use hypervisor- foundation paten virtualization processing, which postulate hardware virtualization to support many I/O and Estate at the ground scale. prescript / statistic breakdown: hypervisor- foundation processing is delimited by wretched motion, which can be sankalp by using implant - foundation virtualization processing. However, check - foundation mechanism also has purport. It is stiff to build resilient implant - foundation mechanism, and Definite devolution execution relapse if the current implant mechanism interface is used. Epitome: To settle these case, this document uses SDN technique and Kubernetes, which is used as a implant orchestration method. further, mechanism vesiculation is mixed with CNI of Kubernetes and materially samarpan mechanism darkhast foundation on the Open mechanism Direction method command for SDN. In other sound, we have evolved a new CNI by remove the overlay mechanism and a pseudo viaduct used in the spot Kubernetes. The Different evolved CNIs are outright coalescent to the amphitryon mechanism for sublimate - execution mechanism manipulation. advance / experiment: The intercommunity of VDN and Kubernetes portion sublimate execution and waxen mechanism competence. We weigh the mechanism execution of the spot CNIs and the Different elevated CNI in this document, which report the excellence of the new CNI in terms of the premeditated mechanism flow capacity results. 03 30 2020 360 363 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2176.039520 https://www.ijitee.org/portfolio-item/E2176039520/ Masters of Technology in Structure from RIMT University Punjab. BE Civil From Kashmir University. Peerzada Fayaz Brahmjeet Singh Education And Qualification Masters Of Technology, Guru Nanak Dev University, Bachelors. Improvements in materials used for construction have an important impact on the Construction industry. Therefore many efforts have been made in the construction industry to put to use waste material products, e.g., worn-out tyres, into useful and Economical items. If this is achieved successfully it will contribute to the reduced quantity of waste material dumping problems by effective use of these waste materials in the building sector. The present research will concentrate on how to effectively put to use the rubber waste tyres in construction industry so as to reduce their impact on our precious environment and also using them effectively in the construction process. It will involve comprehensive laboratory tests on fresh and hardened rubberized concrete in order to study its strength behavior i.e. compressive and flexure strength, and its impact resistance with different volume of rubber in crumb state (fine aggregate). Volume variation of crumb rubber. The proposed research work will study the effect of volume variation of crumb rubber on the compressive strength, flexural strength, split tensile strength & workability in terms of Slump in mm of the concrete. 03 30 2020 149 154 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2177.039520 https://www.ijitee.org/portfolio-item/E2177039520/ Department of ECE, Parul Institute of Technology, Limda, Vadodara, Gujarat, India. Dhwani Brahmbhatt Yogesh Parmar Asst. Prof., Department. of ECE, Parul Institute of Technology, Limda, Vadodara, Gujarat, India. Ongoing improvements in the region of satellite communication are making conceivable minimal effort information transmission and TV broadcasting to gently populated zones spread over a huge environmental district. As a result of direct and non-direct manner of satellite subsystems and station, audio and video transmissions through satellite transponders face corruption. These damages make an antagonistic impact on the end to end interface execution. This Project is centered around reproduction of the Digital Video Broadcasting – Satellite second era computerized TV transmission. For this simulation, an application in MATLAB is created. It tends to be utilized for re-enactment of entire preparation in DVB-S2 transmitter including stream adjustment, FEC coding with interleaving, modulation, channel damage & also opposite tasks in the receiver. The main aim of this model is to manage Digital Video Broadcasting – Satellite second era parameters using filter in different modulation scheme like QPSK, 8PSK, 16APSK and 32APSK, to get better roll off factor, with all the possible code rates, and use Hardware Description Language to prepare this model, since this way of implementation will make the model cost efficient and also enables the user for the customized code rates. 03 30 2020 698 701 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2178.039520 https://www.ijitee.org/portfolio-item/E2178039520/ Pursuing Bachelor of Technology in Computer Science and Engineering from Meerut Institute of Engineering and Technology, Meerut. Divyanshi Tyagi Divyansh Khare Pursuing Bachelor of Technology in Computer Science and Engineering from Meerut Institute of Engineering and Technology, Meerut. Disheak Ahlawat Pursuing Bachelor of Technology in Computer Science and Engineering from Meerut Institute of Engineering and Technology, Meerut. Mansi Pursuing Bachelor of Technology in Computer Science and Engineering from Meerut Institute of Engineering and Technology, Meerut. Gaurav Yadav Pursuing Bachelor of Technology in Computer Science and Engineering from Meerut Institute of Engineering and Technology, Meerut. We are predicting the bias (left leaning or right leaning) in online news articles based on text of online articles collected and the publication. The rating (either Left or Right) was assigned by looking at the leaning of the publication as found on mediabiasfactcheck.com. As we know the importance of online news has evolved with the advancement in technology. In order to understand the biasness in online journalism related to text of an article, we used a deep Neural Net to make classifications based on the labeling assigned according to publication. If the political bias of the publisher creeps in and such a correlation is there the AI will be able to learn it. Our training produced a very accurate classification model. This shows that online media is not as transparent when presenting news. The methodology is described ahead. 03 30 2020 364 366 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2185.039520 https://www.ijitee.org/portfolio-item/E2185039520/ Physics and Chemical Technology Department, Termez State University Azaamat Kurbanov Name* Xurshid Kurbanov Physics and Chemical Technology Department, Termez branch of Tashkent State Technical University Yadgarov Siroj Physics and Chemical Technology Department, Termez branch of Tashkent State Technical University A. Turdiev Termez branch of Tashkent State Technical University Z. Amanov Termez branch of Tashkent State Technical University The article explores the structure of the grinding machine, which is a pole to the body, and the disk to the disk with a screwdriver and a toothbrush, and to the shaft with a disc and a screwdriver. On the upper side of the body of the machine is placed an anchor at an inclined angle. The tooth is used as a working element and can be adjusted using a rack in the process of researching the disc. We also paid attention to the creation of a machine: the analysis of scientific resources in this area, the technological process being studied in a laboratory setting. The following research has been carried out to develop a model of stone crusher model and some of its dimensions: an overview of the existing technology of building work, the study of some properties of stones, the optimal methods of building work, the diameter and weight of stone. The technological process of the machine is studied; the performance of the new machine is calculated. Experimental tests have shown that the total crushing of a machine with a 2.0-fold increase compared to existing machines will increase by 2.0 times. Thus, based on the results of our preliminary experiments, we came to the following conclusions: The creation of a grinding machine allows for the shortest period of construction work. Unless the creation of a crushing machine does not require the creation of precious stone crushers. 03 30 2020 313 315 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2197.039520 https://www.ijitee.org/portfolio-item/E2197039520/ Department of computer science, KL University, Hyderabad, Telangana, India, Sumitra Mallick Mrutyunjaya Panda Department of computer science and applications, Utkal University, odisha, India The rise in chronic diseases becomes strain in modern healthcare systems, some such disease is the mental illness. However, a solution is required to provide high quality care for the patient that is achieved through precision medicine. The precision medicine for mental illness disease is found to be taken care of because it treats the patient health by considering the individual profiles. The modern healthcare systems are encouraged to develop precision medicine to be used in the future and accessed anywhere in the world. This paper further provides a comprehensive survey of the state of art technologies of precision medicine approach for the mental illness disease. The aim of this research is to develop a taxonomy of mental illness disease by finding their symptoms along with genomes. The survey proposes a Medicare system should be developed for precision medicine considering deep learning techniques are the methodologies to classify the mental illness diseases for better accuracy and efficiency. 03 30 2020 367 371 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2206.039520 https://www.ijitee.org/portfolio-item/E2206039520/ Ph.D Research Scholar - Mother Theresa Women's University and Faculty, Department of Computer Science, Kristu Jayanti College, Bangalore. Mary N Peter* Pushpa Rani Professor and Chairperson, Department of Computer Science of Mother Teresa Women’s University, India In smart cities, traffic congestion is one of the significant problems for citizens. Traffic management is an essential one for the quick development of populace and urban movement in metropolitan areas, and traffic blockage is often seeming on streets. To handle different issues for managing traffic on the streets and to help experts in inappropriate arrangement, a smart traffic management system with the IoT (Internet of Things) is proposed in this paper. Mechanisms to utilize IR sensors to distinguish traffic density isn't easy as smooth a solo vehicle recognized at the last sensor so that it can suggest traffic density in high in any event, even if there is free space before it. A technique to be proposed to solve the previously mentioned issues efficiently is by utilizing the Internet of things for traffic management systems. This paper aims to propose a Fuzzy controller to deal with traffics in smart cities. Fuzzy induction used to compute exact traffic, which separates the parking vehicle and moving vehicle. There is an issue of separating parking and un-parking vehicles in the existing systems. So, we planned to solve this using fuzzy logic. 03 30 2020 488 494 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2213.039520 https://www.ijitee.org/portfolio-item/E2213039520/ Department of Computer Science & Engineering, Government College of Engineering & Textile Technology Berhampore, WB, India. Dibyendu Barman* Md Bakash Ahamed Department of Computer Science & Engineering, Government College of Engineering & Textile Technology Berhampore, WB, India. This work attempts to give a best approach for selecting one of the popular image compression algorithm. The proposed method is designed to find the best performance approach amongst the several compression algorithms. In this work existing lossless compression technique LZW (Lempel-Ziv-Welch) is redesigned to achieve better compression ratio. LZW compression technique works on the basis of repetition of data. In a situation where all the values are distinct or repetition of data does not present the LZW can’t work properly. To avoid this problem, difference method called difference matrix method which is actually calculate the difference between two consequence data and store it in a resultant matrix is used. In this case the matrix contains repetitive data which is more effective compared to LZW technique. Another problem of LZW is dictionary overflow, because of LZW works on ASCII character there is a limit of 256 dictionary length initially. In this work dynamic dictionary method is used without using the ASCII rather than this static method. As a result, this dictionary can contain the initial value anything in a range of -256 to 255. Here ASCII values are not used because the proposed method is applicable grayscale image, where the pixel values are between in range 0 to 255. Using these two changes the proposed improved LZW method becomes more powerful that can compress a non-repetitive set of data significantly. The proposed method is applied on many standard gray images found in the literature achieved 7% to 18% more compression the normal LZW keeping quality of the image same as existing. 03 30 2020 87 92 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2216.039520 https://www.ijitee.org/portfolio-item/E2216039520/ Department of E.C.E, School of Engineering and Technology, Centurion University of Technology and Management, Odisha, India. Prabhat K. Patnaik* Dhruba C. Panda Department of Electronic Science, Berhampur University, Berhampur, India. M.Vamshi Krishna Department of E.C.E, School of Engineering and Technology, Centurion University of Technology and Management, Odisha, India. In this paper various geometrical shapes, derived from fractal mathematics have been simulated for obtaining its multiband or wideband features. Design of fractal antennas involves a lot of calculations. In order to ease the calculation, the Artificial Neural Network (ANN) is implemented. The results obtained from ANN are in accordance with the measured results. 03 30 2020 1787 1791 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2220.039520 https://www.ijitee.org/portfolio-item/E2220039520/ Department of information technology from BINUS University Indonesia Natassya Afdalena Triany* Sani Muhamad Isa Lecturer and researcher in the Department of Computer Science, BINUS University Indonesia Social media currently plays an important role as a means of exchanging information. Through social media, information is obtained that can be used to see people's sentiments about a product or an event. Social media is a viable option to attract public sentiment through a method called sentiment analysis. The thing done is attracting sentiment from internet users through the posts made. In this way, sentiment data can be collected quickly and easily. Current economic behavior has proven that financial decisions are driven significantly by sentiment. The level of collective optimism or pessimism in society can influence investor decisions. Sentiment can also be interpreted as something that is felt by someone, both positive and negative. Sentiments and perceptions are psychological constructs and therefore difficult to measure in the analysis. This study focuses on sentiment analysis of information obtained from Twitter about stocks. For sentiment classification process ensemble methods of Naïve Bayes and SVM is used. Sentiment results are classified as positive or negative. We are expecting to see if there is connection between sentiment analysis from social media in predicting movement of IHSG stock price. As a result, we obtained strong correlation with coefficient of correlation r= 0.56609. 03 30 2020 155 161 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2226.039520 https://www.ijitee.org/portfolio-item/E2226039520/ pursuing B.Tech + M.Tech (integrated course) from ITM University, Gwalior. Avinash Birthare* Dr Mukesh Pandey professor, Department of Civil Engineering, ITM University Gwalior, (M.P), Sohit Agarwal Associate professor in the Department of Civil Engineering at ITM University, Gwalior. Now days, there are so many new nano-technologies and methodologies are developed on the field of construction. These days, there is a swiftly rising concern especially using Nano-particles in Portland Pozzolana cement (PPC) concrete to improve the overall properties. The upper layer area of Nano-particles gives more chemical reaction at the subject to gives improved properties and capacities. Complete experiment the mixture of PPC- mortar with Nano-particles, ZnO with diameter of 50-60 nm of compressive-strength are investigated. ZnO have good physical and chemical properties such as dissolve in most of acids, reducing void ratio, availability in different crystalline forms gives enhanced mix of mortar. The principle reason for this investigation prepare a blended mortar with improved mechanical properties. The impacts of nano particles on the qualities such as compressive strength of mortar were experimentally investigated. The blended cement consists of Portland Pozzolana cement (PPC) and nano zinc oxide (NZnO) particles are used. The blended cement given in this investigation consists of Por PPC-cement and NZnO particles. The cement is moderately replaced with NZnO of 0, 0.5, 1, and 1.5 % by PPC cement. The mixture of cement, sand and water was prepared by the ratio of 1:2 and 1:3 of cement-sand by weight with water – binder ratio of 0.35. The strength of cement mortar will be measured after 7, 14 and 28 days. By adding NZnO, we can get good strength values of concrete more than usual strength values we got approximately 18%, of more strength by replacing 1.5% of cement by weight and also there is minimum usage of water with using super plasticizer. 03 30 2020 5 8 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2227.039520 https://www.ijitee.org/portfolio-item/E2227039520/ Information Systems Management Department, BINUS Graduate Program-Master of Information Systems Management, Bina Nusantara University Jakarta, Indonesia Fachrizal* Ahmad Nurul Fajar Information Systems Management Department, BINUS Graduate Program-Master of Information Systems Management, Bina Nusantara University Jakarta, Indonesia Every welding process possess its own advantages and limitations and selected after careful analysis and study of variables related to the process /product form and application criteria. Factors governing the selection of welding process includes the type of the product to be welded, material, joint geometry, field and service conditions, productivity expectations, capital cost, availability of resources, quality requirements, net cost savings etc. Currently in India, shielded metal arc welding is the major welding process dominates the welding industry and plays a key role compared to other welding processes. To achieve the higher productivity and cost savings, it is necessary to adopt suitable welding process, which can be superior to SMAW and can be justified fully in terms of productivity, quality and cost. Comparative production studies were conducted to establish the facts and to arrive conclusion. This concept will be applicable for pipe spools welding in a fabrication shop for welding groove and fillet weld joints in out of position. Process will be applied for large bore spools welding i.e. for Pipe diameter equivalent or greater than 168 mm OD and wall thickness of 7.11 mm and above. For study purpose only two welding processes were taken into account i.e. SMAW and FCAW. Since carbon steel pipe spools fabrication is 85% of the total scope, selection of the high productive and cost economic welding process plays a vital role. 03 30 2020 372 376 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2228.039520 https://www.ijitee.org/portfolio-item/E2228039520/ ECE Department, Andhra University College of Engineering(A), Andhra University, Visakhapatnam, India. Regidi Suneetha* Prof P V Sridevi* ECE Department, Andhra University College of Engineering(A), Andhra University, Visakhapatnam, India. It is aimed to provide an insight on microstrip patch antenna in biomedical applications, the challenges and to discuss the procedure in the way they are dealt so far, in the literature. Microstrip patch antenna gained considerable scientific interest because of its integration with textiles, body mounted applications and medical implants. The ease of integration, confirmability, planar structure, miniaturization, patient safety and biocompatibility make pondering conclusion of intriguing mathematical and experimental paradigm. Simulation tools like HFSS, CST Microwave Studio etc., are being used and the antenna is fabricated after getting satisfactory results. The fabricated antenna is tested under various bio-medical, environmental and mechanical stress and strain conditions. The challenges along with some remedial solution are being discussed with envision to achieve painless, uncomplicated, trustworthy diagnosis and treatment. 03 30 2020 162 165 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2235.039520 https://www.ijitee.org/portfolio-item/E2235039520/ Departement, National Engineering College, Kovilpatti M. Aswini* P.Anu Karthika Departement, National Engineering College, Kovilpatti. V. Nivedha Departement, National Engineering College, Kovilpatti. V. Poorani* Departement, National Engineering College, Kovilpatti. Gengaraj. M EEE Department, National Engineering College, Kovilpatti, India Dr.Kalaivani. L EEE Department, National Engineering College, Kovilpatti, India. This paper depicts the methodology of improving power quality at load end is connected with renewable source of energy for power generation. The excessive of power physics devices in distribution system has evolved the matter of power quality. Shunt active power filter (SAPF) acts as a current supply and suppresses the harmonics by introducing the same amount of compensating opposite harmonics component along with common coupling. Simulation design of SAPF based on d-q model is implemented using MATLAB/simulink Toolbox. It explores the modelling of a Proportional Integral (PI) and fuzzy logic controller (FLC) based, SAPF for a 3 wire network to compensate current harmonics fed to a nonlinear load. The proposed model can be validated and its robustness will be checked through the simulation results. Simulation results illustrate that the logic based active filter out performs the PI based shunt active filter. 03 30 2020 377 381 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2237.039520 https://www.ijitee.org/portfolio-item/E2237039520/ Assistant Professor, Department of Electronics and Instrumentation Engineering , Vignan Institute of Technology and Science, Hyderabad. B. Rajesh P. Srinivas Assistant Professor, Department of Electronics and Instrumentation Engineering , Vignan Institute of Technology and Science, Hyderabad. K. Premsagar Assistant Professor, Department of Electronics and Instrumentation Engineering , Vignan Institute of Technology and Science, Hyderabad. P. Prashanthi Reddy Assistant Professor, Department of Electronics and Instrumentation Engineering , Vignan Institute of Technology and Science, Hyderabad. M. Akhila Assistant Professor, Department of Electronics and Instrumentation Engineering , Vignan Institute of Technology and Science, Hyderabad. The Electrostatic sensors are extensively used in military, radar and electronic applications which can sense the electric charge from the moving charged motes. The signal conditioning circuit for an electrostatic sensor is a voltage amplifier that can intensify a small input signal. This paper proposal is to design a low noise signal conditioning circuit using Multisim and to study the performance of its gain, bandwidth and noise properties. 03 30 2020 166 168 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2238.039520 https://www.ijitee.org/portfolio-item/E2238039520/ Department of electronics and communication University of Allahabad, Prayagraj-211002,U.P., India. *Shekhar Yadav Komal Jaiswal Department of electronics and communication,University of Allahabad, Prayagraj-211002,U.P.,India Dheeraj Kumar Department of Physics and Electronics, Rajdhani College, Delhi (University of Delhi). Rajeev Singh Department of electronics and communication University of Allahabad, Prayagraj-211002,U.P., India. A novel stacked double U, angular ring shaped MIMO antenna is designed using DGS, and a pair of balanced shorting pin is proposed for C, X, and K-band applications. The aim of this design is to enhance the bandwidth by using different techniques in a compact MSA. The proposed antenna is designed on an FR4 substrate with permittivity of 4.4 is used in this design with dimension of 10×10 mm2 with two-microstrip line and one coaxial feed as a feeding mechanism. Two asymmetrical antennas of FR4 substrate are stacked with an air gap of thickness 1.6mm that exhibits a low correlation coefficient; low mutual coupling and refection coefficient is below-25 dB. The antenna is simulated through HFSS software 13.0 version shows Operates at UWB of frequency range 6.17-9.3, 18.1-18.7 GHz with maximum radiation efficiency of 83%. 03 30 2020 382 388 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2239.039520 https://www.ijitee.org/portfolio-item/E2239039520/ Department of Computer and Information Sciences,King Saud University Alanoud Alsudairy Dr.Ahmed Alsanad Department of Computer and Information Sciences, King Saud University Dr.Ahmed Emam Department of Computer and Information SciencesKing Saud University Internet of Things (IoT) is an information exchange system between computing devices and people over a network. Because IoT is new to Saudi Arabia (SA), no business model in the public sector provides it, making it difficult to adopt. The results of 55 studies show that one challenge for adopting IoT in SA is a lack of a consistency in designing a dynamic solutions architecture to coordinate the required support to integrate IoT into the SA digital transformation plan. Another challenge is a lack of government standards. This study summarizes the problems that researchers and developers face in managing IoT activities for a dynamic solutions architecture for Saudi Vision 2030. It explores how to define a dynamic solutions architecture for any IT platform, based on design, implementation, experimental validation, and evaluation of the effects on system quality. To begin, this study provides an overview of IoT and details to enable IoT technologies for public and private sectors to help achieve Saudi Vision 2030. 03 30 2020 93 100 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2241.039520 https://www.ijitee.org/portfolio-item/E2241039520/ Head , ERP , Analytics and Billing, Department of Information Technology, India and APAC American Towers Corporation, Gurugram India Dr Sunil Kaushik Dr. Akashdeep Bhardwaj Professor, Department of School of Comp Science, University of Petroleum and Energy Studies, Dehradun, India Tough competition in the Enterprise Resource Planning or the ERP marketplace has led to the need for optimizing resources to improve productivity, cost effectiveness and smooth operations to provide immediate support and response. This ensures the customers are kept satisfied. Selecting an ERP solution that can satisfy specific business requirements enable smooth implementation. However, ERP failures indicate that 1/3 of the companies fail to realize even half the benefits of an ERP, while 3/4 implementations over run the allocated budget and 1/2 end up exceeding the planned and scheduled duration. This research focuses on Agile Methodologies and Lean Thinking. The authors implemented effort and schedule comparison their research that prove and outshines the traditional ERP implementation methodologies. 03 30 2020 1061 1067 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2244.039520 https://www.ijitee.org/portfolio-item/E2244039520/ Civil Engineering Department, Beni-suef University, Beni-suef, Egypt. Amr A. Elbanna* Sherif S. Safar Civil Engineering Department, Cairo University, Giza, Egypt. Mokhtar M. Seddik Civil Engineering Department, Cairo University, Giza, Egypt. Various numerical models of diagonally stiffened steel plate shear wall were tested under push-over loads to study the required stiffness of columns of diagonally stiffened SPSWs. This research presents a parametric study to explore the influence of varying the infill panel’s thickness, width, and height and the number of floors on the stiffness of the edge columns, and to propose expressions to predict the column’s in-plane stiffness and area required for preliminary design. Different SPSWs were modeled with a range of several stories, an aspect ratio, and height to thickness ratio, respectively, of (n=3-7), (Lp/hp=1-2), and (λ=200-400). The results indicated that the number of floors (n) has a great effect on the wall’s shear capacity. A greater number of floors lead to buckling in columns and early failure of the system, and subsequently, an increase in the column’s rigidity is required. Higher the drift is, lower the shear capacity of the wall is, particularly for walls with a larger aspect ratio (Lp/hp > 1.5), and smaller height to thickness ratio (λ < 400). It is proposed that the columns’ out-of-plane stiffness divided by its in-plane stiffness to be equal or greater than 0.4. Equations are proposed to predict the required columns’ rx, and ωh substantial to assure that the columns can resist the impact of the tension field and the plate achieves full yield strength. 03 30 2020 101 109 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2249.039520 https://www.ijitee.org/portfolio-item/E2249039520/ B.Tech, Final Year, Department of Informa-tion Technology, SRM Institute of Science and Technology, Chen-nai, India Apurva Anand* Prasoon B.Tech, Final Year, Department of Information Tech-nology, SRM Institute of Science and Technology, Chennai, India. Bipul Kumar B.Tech, Final Year, Department of Information Technology, SRM Institute of Science and Technology, Chennai, India. R.M. Rani Assistant Professor and HOD, Department of Information Technology, SRM Institute of Science and Technolo-gy, Chennai, India. Communication is the part and parcel of everyone. In organizations including educational institu-tions, Group communication is a common phenomenon. This type of communication happens between employees of the same team or organization, students of the same course or department, etc. Many mobile applications provide a group communication facility. However, the privacy of users is often compromised. For instance, in the WhatsApp Group, the mobile numbers are visible to every recipient. That is not always desirable. So, in this paper, a cloud-based iOS application is proposed for group communication in which the contact numbers are not visible. The administrator will control the read and write access to the recipients. Even, the identification label of the users inside the chat screen will be decided by the administrator. The application is coded in Swift. Cloud FireStore, one of the tools of the Firebase is used as the database and Firebase SDK is integrated with the code using CocoaPods. 03 30 2020 1054 1060 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2250.039520 https://www.ijitee.org/portfolio-item/E2250039520/ Department of Electrical and Electronics Engineering, Sri Krishna College of Technology, Coimbatore, India. V. Vanitha* D.Magdalin Mary Department of Electrical and Electronics Engineering, Sri Krishna College of Technology, Coimbatore, India. G.Sophia Jasmine Department of Electrical and Electronics Engineering, Sri Krishna College of Technology, Coimbatore, India. Akhil Balagopalan Department of Electrical and Electronics Engineering, Amrita School of Engineering, Coimbatore, India. Due to the stochastic nature of wind speed, accurate wind power prediction plays a major challenge to power system operators for unit commitment and load dispatching. To predict wind power production with great accuracy, wind speed forecasting in different time horizons is gaining importance nowadays. This paper explores the application of Adaptive Neuro-Fuzzy Inference Systems (ANFIS) to forecast the wind speed in Logan international airport, USA for one year in every one hour time interval. ANFIS with different structures and membership functions are trained to find out the best model to do short term wind forecasting. Simulation with the best model is performed in MATLAB and the results show that the three input model with wind speed, direction and air pressure as inputs using Gaussian bell membership function provides the smallest errors. 03 30 2020 389 391 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2252.039520 https://www.ijitee.org/portfolio-item/E2252039520/ Assistant Professor, Mittal School of Business, Lovely Professional University, Phagwara, India. Maninder Singh Dr. Sanjeev. K. Sharma Professor, UIAMS, Panjab University, Chandigarh, India. Dr. Suresk. K. Chadha Professor, UBS, Panjab University, Chandigarh, India. The lack of implementation of SCI in construction companies is one of the major cause that these companies does not gain competitive advantage in this competitive world. SCI is calculated on various variables. The main aim of this study is to find the effect of Supplier Partnership and Logical Integration as the major variable related to supply chain over Competitive Advantage. Initially the questionnaire was checked for validity and reliability. Then SEM is applied using smartPLS software. Correlation reported that Strategic Partnership is having moderate positive and Logical Integration is having high positive relation with Competitive Advantage. And regression reported that overall SCI is having a strong and positive relation with Competitive Advantage. Further research is advised as this study was having limitations. 03 30 2020 174 179 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2255.039520 https://www.ijitee.org/portfolio-item/E2255039520/ Associate Professor, Electronics and Communication Engineering, Karpagam College of Engineering – Coimbatore Dr. Saminathan V Harikrishnan S Electronics and Communication Engineering, Karpagam College of Engineering – Coimbatore Karthik P Electronics and Communication Engineering, Karpagam College of Engineering – Coimbatore Sudharson V Electronics and Communication Engineering,Karpagam College of Engineering – Coimbatore Vimalkishore J Electronics and Communication Engineering,Karpagam College of Engineering – Coimbatore The earthquake and tsunami are dangerous natural disasters that are unpredictable, which causes damage to lives and property. It happens all of a sudden, but we can alert from it. In this modern world, many modern technologies can easily analyze the small vibrations and knock so that we can take the necessary precautions. The usage of accelerometer ADXL335 paves the way to sense the earthquake vibrations and tsunami seismic waves in all three axes. This project setup includes the LoRa and GSM module in addition to the accelerometer. Hence, it acts as a perfect shield because it gives a warning, vibration graph on the computer and spread the warning via messages. 03 30 2020 1091 1094 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2256.039520 https://www.ijitee.org/portfolio-item/E2256039520/ Information Systems Management Department, BINUS Graduate Program – Master of Information Systems Management, Bina Nusantara University, Jakarta Sfenrianto Sfenrianto* Kevin Angriawan Information Systems Management Department, BINUS Graduate Program – Master of Information Systems Management, Bina Nusantara University, Jakarta Rahmat Ivan Aziz Information Systems Management Department, BINUS Graduate Program – Master of Information Systems Management, Bina Nusantara University, Jakarta Teguh Sugiyono Information Systems Management Department, BINUS Graduate Program – Master of Information Systems Management, Bina Nusantara University, Jakarta PELNI Medical Center is one of the oldest Medical Centers in Indonesia which in 2018 is already 100 years old. In providing good health services to the community, PELNI Medical Center also conducts education and training processes for its employees. The current training is conventional training, where the time and place of training can change because it adjusts to the conditions of existing services and patients. Besides, the costs required are quite a lot to meet the needs of the training that is held. Therefore, PELNI Medical Center wants an e-Learning system as a learning medium to overcome these problems and can facilitate the education and training process. The design of the e-Learning system is built using the method of designing Object-Oriented Analysis and Design with the Unified Process. As for the data collection techniques used, namely interviews and questionnaires. The expected results of the design of this e-Learning system are that it can be used as an educational medium in the education and training process at Pelni Medical Center, increase the ability of knowledge and independent learning in each of its users, and can facilitate the improvement and storage of learning materials applied at the PELNI Medical Center. 03 30 2020 180 186 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2257.039520 https://www.ijitee.org/portfolio-item/E2257039520/ Assitant Professor, Department of Computer Science and Engineering, SRM Institute of Science and Technology, Kat-tankulathur, Chennai. Dr. K P Vijayakumar Ananthu Nair Undergraduate Student, Department of Computer Sci-ence and Engineering, SRM Institute of Science and Technology, Kat-tankulathur, Chennai. Nishant Tomar Undergraduate Student, Department of Computer Sci-ence and Engineering, SRM Institute of Science and Technology, Kat-tankulathur, Chennai. Sign language and facial expressions are the major means of communication for the speech flawed people. General people can understand the facial expression to an extent but cannot understand the sign language. Dumb people are unable to express their thoughts to normal humans. To reduce this gap of communication, this paper presents an electronic system which will help the mute people to exchange their ideas with the normal person in emergency situations. The system consists of a glove that can be worn by the subject which will convert the hand ges-tures to speech and text. The message displayed will also help deaf people to understand their thoughts. This prototype involves raspberry pi 3 as the micro-controller along with the flex sensors, accelerometer sensor. The resistance of the flex sensor changes due to the bending moment of the fingers of the subject. The accelerometer measures the angular displacement of the wrist along the y-axis. The microcontroller takes the input from the two sensors and matches it with the pre-programmed values and plays the respective message. The system makes use of python and its libraries for microcontroller programming. 03 30 2020 1241 1246 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2260.039520 https://www.ijitee.org/portfolio-item/E2260039520/ BTech (2nd year), Electronics and Communication Engineering (Spec in IOT & Sensors), Vellore Institute of Technology, Vellore. P. Pujithsai O.Goutham Sai BTech (2nd year), Electronics and Communication Engineering (Spec in IOT & Sensors), Vellore Institute of Technology, Vellore. Varshith BTech (2nd year), Electronics and Communication Engineering (Spec in IOT & Sensors), Vellore Institute of Technology, Vellore. Mr. Bagubali A Assistant professor, VIT, Vellore We have proposed the enhancement of Traffic Light Controller utilizing ultrasonic sensor and microcontroller. The Paper is planned for structuring a thickness based dynamic traffic signal framework where the planning of signal will change consequently on detecting the traffic density at any road junction. Traffic jams are an extreme issue in many urban areas over the world and thusly the time has come to move progressively manual mode or fixed clock mode to a robotized framework with choice making abilities. Present day traffic control framework is fixed time based which may render wasteful on the off chance that one path is operational than the others. To solve this issue, we have made a structure for a clever traffic control system. Some of the time higher traffic density at one side of the intersection requires longer green light time when compared with standard green light time. We, consequently propose here a component where the time of green light and red light is allotted based on the thickness of the traffic present around then. This is accomplished by utilizing ultrasonic sensors which are available on Top of the street.Sometime, in specific intersection of the street junctions extended periods of Red Traffic Light. In instance of any vehicle in crisis circumstance or on the other hand in emergency like VVIPs,a SMS is send to Traffic Control Authority, who has the control of microcontroller empowers microcontroller to change traffic light green for specific time on need premise. 03 30 2020 392 394 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2263.039520 https://www.ijitee.org/portfolio-item/E2263039520/ Department of Mechanical Engineering, Faculty of Engineering, Near East University, via Mersin 10 Turkey, 99138 Nicosia, Cyprus. Constant Bande Bakande Youssef Kassem Department of Mechanical Engineering, Faculty of Engineering, Near East University, via Mersin 10 Turkey, 99138 Nicosia, Cyprus. Hüseyin Çamur Department of Mechanical Engineering, Faculty of Engineering, Near East University, via Mersin 10 Turkey, 99138 Nicosia, Cyprus. Density, viscosity and cetane number are important physical properties of biodiesel as they participate in one way or another in the fuel metering, calibration and nozzle process during combustion. High and good accuracy of the physical properties of biodiesel will therefore lead to improved combustion and therefore better efficiency. The aim of this study is therefore to seek good and high precision by combining properties and comparing the analysis between ANN and RSM. Studies have been made by researchers to collect data. In this study the combination of properties is exploited. A total of 1360 data from the various studies has been collected and exploited. From this data after elimination and treatment 39 possible combinations were analyzed and compared by ANN and RSM. The result of simulation is: The best combinations: 𝝆=𝒇(𝑭𝒂) , 𝝂=𝒇(𝑭𝒂) , 𝒄𝒏=𝒇(𝑭𝒂) with 𝑹𝟐 respectively equal to (0.9998, 0.9998 , 0.9987) and R equal to ( 0.9997,0.99971,0.9984) obtained with ANN simulation provide more accuracy than 𝑹𝟐 ( 0.912 , 0.799 , 0.766 ) and R ( 0.837, 0.739 , 0.920) obtained with RSM simulation in general 𝑹𝟐 obtained with ANN (0.9998, 0.9998 , 0.9987) provide good accuracy than 𝑹𝟐 (0.9112,0.799,0.766) obtained with RSM . Also there is a good relationship between fatty acid and others properties since they provide good result. In general the overall regression coefficient R and the correlation coefficient 𝑹𝟐 values of the combinations obtained in the simulation with the ANN provide better and good accuracy since their values are close to each other and all close to 1, and their mse tend towards 0. While the one obtained with RSM are distant from each other and distant of 0 so they provide an acceptable accuracy.it is also important to note that high accuracy of properties using RSM must have at least combination of three parameters. Also after every combination, the conclusion says there is a good relationship between fatty acid and other properties. Then for the future work, it will be benefit to combine fatty acid with others properties and evaluate result, also use another network to simulate. 03 30 2020 2362 2376 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2266.039520 https://www.ijitee.org/portfolio-item/E2266039520/ Research Scholar, Department of Civil Engineering, RIMT University, Punjab, India. Basharat Nabi Anuj Sachar Assistant Professor, Department of Civil Engineering RIMT University, Punjab, India. Manish Kaushal Assistant Professor, Department of Civil Engineering RIMT University, Punjab, India Re-use of waste, otherwise deemed to be of no use, in concrete will lead to green environment. The concrete made so is called sustainable concrete which can also be called as Green concrete. The main focus of this research is to study the strength of concrete with crushed waste ceramic tile and silica fume as partial replacement of coarse aggregate and cement respectively. Rapid construction and total reliance on conventional materials of making concrete are leading to dearth of the materials and increased construction cost. In this research an attempt is being made to find the sustainability of waste ceramic tile as coarse aggregate and silica fume as a possible replacement for conventional aggregate and cement in concrete. In this study we replace the micro silica for cement partially in the percentage of 5%,10%, 15%, 20%, and 20% of coarse aggregate is replaced with crushed waste ceramic tiles. The replaced concrete is compared with the normal concrete. Tests are done following codes of Bureau of Indian Standards. Mix design of M30 grade of concrete is designed by following the specification given in the IS 10262:2009. For all the materials, physical properties shall be determined and fresh concrete is prepared. Concrete is then tested for determination of physical properties in fresh state. In hardened concrete, mechanical properties such as compressive strength & split tensile strength of concrete and durability properties like resistance against acid and alkaline attack would be examined and compared with conventional concrete. 03 30 2020 187 194 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2268.039520 https://www.ijitee.org/portfolio-item/E2268039520/ Assistant professor of Information technology in SRM IST,Chennai,Tamil Nadu,India. T. Chandraleka S. Abinayaa Assistant professor of Information Technology in SRM IST,Chennai,Tamil Nadu,India. Anshu Rathour Department of Information Technology,SRM IST,Chennai,Tamil Nadu,India. Arthi Mahalakshmi Department of Information Technology,SRM IST,Chennai,Tamil Nadu,India. Chinnerikuppam Heema Department of Information Technology,SRM IST,Chennai,Tamil Nadu,India Aflatoxins are found in food items and are treated as essential to food security issue. Aflatoxins are poisonous toxins which are found in various feed products and are very dangerous for humans and animals as well. These are not the products which cause immediate liver cancer or the liver damage but instead grow slowly in the human body. They are also a type of fungal toxins can only be noticed in costly machines with the use of UV fluorescence spectroscopy. These are mostly found in peanuts,corn,maize and broken rice. Aflatoxins are never found in freshly released products, rather they are formed because of the moisture found in the atmosphere around.Aflatoxin-B1 when present in food products undergoes the process of fluorescent spectroscopy .Here the UV rays are excited to 365 nm for single photon and 730 nm for bi photon. Basically the results for the range of 400 and 550 nm is considered as the most contaminated of the food product. For every wavelength when photons are excited ,the inward florescent signals are to be noted and observed. Based on the wavelengths of the excitation signal we can distinguish between the hygienic and impure food samples .There would be largest difference of wavelength between single and bi photon fluorescence values. The similarity between the florescent signals of the samples of different food products would define the impure samples. Thus UV fluoroscence spectroscopy is very essential for measuring the aflatoxin B1 present in various food products. 03 30 2020 1068 1071 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2272.039520 https://www.ijitee.org/portfolio-item/E2272039520/ Ph.D. student at Civil Engineering Department, National Institute of Technology, Surat, India. Kalpesh Borse* Prasit G. Agnihotri Professor at Civil Engineering Department, National Institute of Technology, Surat, India. This study primarily focused on the change in the trend of rainfall, temperature and rice yield of the Nashik region of Maharashtra state. The trend analysis of all three climatic parameters was carried out using the Mann - Kendall method. For this, daily rainfall, minimum, and maximum temperature and rice yield data of 30 years i.e. from 1984 to 2014 were processed to find out the overall trend of rainfall, temperature and rice yield. The Mann-Kendall method was applied for the determination of trends. The results obtained from the study show that there is an increase in the trend of rainfall for stations viz. Nashik, Trimbakeshwar, and Sinnar subsequently decreasing trend for Dindori, Igatpuri, Peint, and Niphad. Minimum and maximum temperature for all the stations present in the study area showing an upward trend. Crop yield of Nashik, Peint, and Sinner shows an upward trend and Trimbakeshwar, Dindori, Igatpuri, and Niphad show a downward trend. It has been found that the rainfall trend over the entire region is decreasing. Sixty percent of station data shows that there is a significant decrease in the trend of the rice yield due to a decrease in the rainfall and an increase in temperature trends. 03 30 2020 395 398 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2276.039520 https://www.ijitee.org/portfolio-item/E2276039520/ Research Scholar, CSE, SRM IST, Kattankulathur (Chennai), India. *Saravanan. M Rajeev Sukumaran* SRM-CARE, SRMIST, Kattankulathur (Chennai), India. M.R. Christhuraj CSE, SRMIST, Kattankulathur (Chennai), India T.T. Manikandan CSE, SRMIST, Kattankulathur (Chennai), India The behavior of underwater acoustic wireless communication is challenging one compared to terrestrial communication due to the unpredictable changes in underwater. The multichannel communication needs to consider a lot of parameters at the time of modeling and investigation such as losses and noise. Thus, communication channel separation is curiously inflexible to investigate all properties of underwater. Compared with other modes of communication, acoustics waves afford the sturdy data delivery and receiving capability in underwater. The channel allocation and detachment appearing quite difficult in acoustic with respect to techniques that induce the transmission of data digitally, which compared with the major properties of attenuation variation in underwater. In this proposal, we concentrate on the numerical results for the transmission and receiver end delay variation with the help of stochastic network calculus to measure the deviation between the simulation and numerical results (SNC) with respect to multichannel(MC). 03 30 2020 169 173 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2277.039520 https://www.ijitee.org/portfolio-item/E2277039520/ Assistant Professor, Dept. of CSE, GITAM School of Technology-Bengaluru Dr. Chetana Tukkoji Shreyas K. S Final Year B.Tech Students, Dept. of CSE, GITAM School of Technology-Bengaluru Arun N. K Final Year B.Tech Students, Dept. of CSE, GITAM School of Technology-Bengaluru R.Venkatrami Reddy Final Year B.Tech Students, Dept. of CSE, GITAM School of Technology-Bengaluru K.S Harshavardhan Final Year B.Tech Students, Dept. of CSE, GITAM School of Technology-Bengaluru Traffic Jam has been one of the worst problems in the Country. Traffic Jams are leading consumption of enormous amount of Time, Energy and Money. Even though various traffic avoiding techniques are implemented, we are not able to reduce the traffic due to growing intensity of vehicles. Hence, there is a requirement for alternate method to overcome this traffic congestion. In this paper, we are implementing a separate lane for public transport by allotting a separate lane for them and to monitor the traffic we are using Artificial Number Plate Recognition camera which can capture the vehicles number plates and can store in database which can also be used as Real Time monitoring of traffic. The public will also be notified by sending them a message to use public transport so that they can save their time and money. 03 30 2020 787 790 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2280.039520 https://www.ijitee.org/portfolio-item/E2280039520/ Assistant professor of Information technology in SRM IST, Chennai, Tamil Nadu, India. Liza M Kunjachen Mhd Faheem Khan Department of Information Technology,SRM IST,Chennai,Tamil Nadu,India Piyush Kumar Department of Information Technology, SRM IST, Chennai, Tamil Nadu,India. Rahul Ranjan Department of Information Technology,SRM IST,Chennai,Tamil Nadu,India. Sneh Pallav Department of Information Technology,SRM IST,Chennai,Tamil Nadu,India. The proposed system generally results a solution to some of the problems which occurs in colleges and schools by providing a monitoring camera with the help of “Artificial Intelligence (AI)” . The main problem which can be occurred is wastage of time in taking the attendance manually or through any biometric sensors. The next problem which can be solved is to control the usage of electricity in classrooms when students are not in class. When the videos are getting recorded with the help of monitoring cameras, at the same time the head counting and face detection of the students present will also be done. When the strength of the class is zero ,the head counting also results to zero. The electricity can also be saved at the same time when people are not present in the classroom. The face recognition is the easiest process which can be done for marking the attendance, where the attendance is marked automatically. This process also helps to prevent the fake attendance. Face recognition and detection is generally based on line edge mapping to attain the identity of the student and also meets the wants of attendance in the universities and schools. The image of the student is to be captured and checked with the database simultaneously and marks the attendance of the particular student. The video gets recorded all the time and checks whether the student remains in class for the entire period.The attendance marking system with the help of technology is very essential for both the teachers and students. 03 30 2020 399 403 CC BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E2285.039520 https://www.ijitee.org/portfolio-item/E2285039520/