-74813b3e17f460286df-4a72 20220415034113134 beie:beie director@blueeyesintelligence.org WEB-FORM International Journal of Innovative Technology and Exploring Engineering IJITEE 22783075 10.35940/ijitee https://www.ijitee.org/ 05 30 2020 9 7 department of Information science and Engineering, MSRIT, Bangalore, India. Ashwitha A* Latha C A department of Computer science and Engineering, AMCEC, Bangalore, India. A perception that is being enacted by numerous in the world is an ample range of day to day things associated and interfacing with one another across world network economically- "the Internet of Things." The gadgets around us trigger extensive amounts of data and an endless interaction between these electronic appliances and the Internet produces useful data for analysis and future prediction. These gadgets are often classified as data sources like sensors, end-user devices like displays, databases and even a knowledge source and sink such as Actuator and Smartphone. Internet of Things (IoT) has promised to facilitate ease and enhanced standard of living for users. Data management for IoT takes part during essential function in its efficient activities and has become a key research theme of IOT. This paper brings the representations of IOT architecture, various techniques for data acquisition, collection, pre-processing and visualization 05 30 2020 255 262 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.F4631.059720 https://www.ijitee.org/portfolio-item/F4631049620/ Department of CSE, VR Siddhartha Engineering College, Vijayawada, India K Srinidhi* G Jotsna Priya Department of CSE, VR Siddhartha Engineering College, Vijayawada, India M Rishitha Department of CSE, VR Siddhartha Engineering College, Vijayawada, India K Tejo Vishnu Department of CSE, VR Siddhartha Engineering College, Vijayawada, India G Anuradha Associate Professor, Department of CSE, VR Siddhartha Engineering College, Vijayawada, India Skin Cancer, a health issue which might cause severe consequences if not detected and controlled properly. Since there is a huge evolution in the health sector because of development in computer technologies, it is possible to analyze images efficiently and make correct decisions. Deep learning algorithms can be used for analyzing dermoscopic images by learning features of images in an incremental manner. Aim of our proposed method is to categorize skin lesion image as Benign or Melanoma and also to study the performance of Convolutional Neural Network algorithm using data augmentation technique and without data augmentation technique. The proposed method uses dataset from ISIC archive 2019. Steps involved in the proposed method are Image Pre-Processing, Image Segmentation and Image Classification. Initially, Image Pre-Processing algorithm is performed on skin lesion image. Image Segmentation algorithm is used to obtain Region of Interest (ROI) from pre-processed image. Then, Convolutional Neural Network algorithm classifies image as melanoma or benign. The Proposed method can rapidly detect melanoma skin cancer which aids in starting the treatment process without delay. 05 30 2020 115 118 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.F4636.059720 https://www.ijitee.org/portfolio-item/F4636049620/ Associate Professor, Department of Computer Science and Engineering at SRM Institute of Science and Technology. R. Naresh* Dhruvil Patel Pursuing Bachelor of Technology, Computer Science and Engineering at SRM Institute of Science and Technology. Aaryan Krishna Pursuing Bachelor of Technology, Computer Science and Engineering at SRM Institute of Science and Technology. Secure car driving is an important entity for safety and is the first priority for any automobile driver and is the main reason for designing a system which captures the state of the drivers eyes and his/her facial variations combined with pulse fluctuations, altogether they gives us parameters to decide whether the driver should be notified or not. Eye detection - more precisely it analyses the eyes and check if they're closed or open using camera module the amount of frames during which eyes are closed is decided. When this number of frames is above a selected threshold, the drive will get a alert. Camera module periodically takes snaps so as to confirm safety..A true time system which captures the state of the driver which will benefit many of us round the globe. 05 30 2020 263 267 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.F4736.059720 https://www.ijitee.org/portfolio-item/F4736049620/ UG Student, Department of Civil Engineering, Medi-Caps University, Indore, India. Adarsh Kosta* Raj Ranjan Gupta UG Student, Department of Civil Engineering, Medi-Caps University, Indore, India. Uttam Vishwakarma UG Student, Department of Civil Engineering, Medi-Caps University, Indore, India. Vinod Kumawat UG Student, Department of Civil Engineering, Medi-Caps University, Indore, India. Chaitanya Mishra Assistant Professor, Department of Civil Engineering, Medi-Caps University, Indore, India. There is a issue of rusting and brittle failure in building structures so there is a need of more durable structure for better performance. The durability of the structure is affected by the choice of the construction material only .But here our main focus is not only to increase the durability but we are also aiming towards increasing the strength of the structure which can be achieved by the confinement of the column. Studies shows that by confining the column, its strength can be increased significantly. From durability point of view, we have carried out the complete replacement of the natural coarse aggregate with the recycled aggregate in order to know its properties and suitability as a replacement material and to promote the idea of sustainable development. In the present paper, an experimental study is presented regarding the load carrying capacity of the unplasticized poly vinyl chloride (U-PVC) confined columns subjected to axial compressive load. The cylinders that are used for this study are M20 grade concrete cylinders which are made using the recycled coarse aggregates. The cylinders are confined using the U-PVC pipes of 2.5mm & 3.5mm thickness and epoxy resin was used to increase the bond strength between the concrete cylinders & the U-PVC pipes. The cylinders that are used in this study are of length 300mm & diameter 150mm. The concrete used in study are designed as per the latest versions of Indian Standard Code of Practice and are prepared after running various trial mixes. A total of 9 specimens were casted for this study out of which 6 specimens were confined using U-PVC pipes while the other 3 specimens were unconfined. The specimens were subjected to gradual compressive load in universal testing machine (UTM) upto the failure and the results were recorded. The results indicated significant increase in the load carrying capacity of the confined columns as compared to the unconfined columns. 05 30 2020 119 124 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.F4739.059720 https://www.ijitee.org/portfolio-item/F4739049620/ Assistant Professor, Sri Shakthi Institute of Engineering and Technology Coimbatore Tamil Nadu, India. Ramachandran V* Sangeeth P Student, Computer Science and Engineering from Sri Shakthi Institute of Engineering and Technology, BE, Coimbatore, Tamil Nadu, India. Shabesh R M Student, Computer Science and Engineering from Sri Shakthi Institute of Engineering and Technology, BE, Coimbatore, Tamil Nadu, India. Yashvanth R P Student, Computer Science and Engineering from Sri Shakthi Institute of Engineering and Technology, BE, Coimbatore, Tamil Nadu, India. Here we are presenting a made sure about DNS with upgraded database which underpins on cloud mail server. DNS in general considered as a straightforward approach where content-based convention occurs, where at least one among the beneficiaries of a message are indicated along with the message content and possibly with additional encoded entities act on behalf of the supreme database. A remote server then receives the message employing a method of inquiries and responses among the client and the server. A server Mail Transfer Agent (MTA) or a Mail User Agent (MUA) whose is the end client can be a customer in the SMTP server database. Here we presenting a technique-based security strategy called as guidance location framework (IDS) which follow the internet protocol (IP) subtleties, date, time and the secret key level of the programmer from the programmer's side. Programmer's area can be discovered utilizing their IP address. The subtleties will be put away in the database from the server side. The email or the DNS client associates with the server MTA through the communication port 25. Telnet program is the most commonly used to test the SMTP server. Upon request DNS doesn't permit one to pull messages from a remote server as it works on the conventional push protocol. With the goal that the primary article is to make protection conservation for the private database the proposed design executes this present reality mysterious database by actualizing the speculation and concealment. It manages forestalling pernicious gatherings and interruption utilizing trust mindful steering system with trust as an assistance. The proficiency and security of information can be accomplished by keeping up single database with explicit access rights. With the activity performed with IDS with ESMTP in Anonymous and Confidential Databases. 05 30 2020 415 418 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.F4748.059720 https://www.ijitee.org/portfolio-item/F4748049620/ Research Scholar, Department of Computer Applications, Alagappa University, Karaikudi, Tamilnadu, India. P. Selvashankari* P. Prabhu Assistant Professor in Information Technology, Directorate of Distance Education, Alagappa University, Karaikudi, Tamilnadu, India. Healthcare is major issue and challenge now-a-days for human being in a daily life. Parkinson Disease or P.D is a one of the disorders that affected in the mid of nervous system. Parkinson Disease affected person cannot be act as normal human being. Among the innumerable disease listed so far, the Parkinson disease occupies an alarming position due to its life threaten concern. Early prediction of Parkinson disease from large volume of electronic health records leads to protect various health issues. There are various challenges and issues such as scalability, accuracy, risk factor, time complexity and sparsity in early prediction of Parkinson disease. There are various conventional algorithms have been proposed to solve these issues and challenges and still needs improvement. The present study, systematic predictive analytics using various classification algorithms such as Support Vector Machine (SVM), Random Forest, AdaBoost, Multi-Layer Perceptron (MLP), Naive Bayes, Decision table, J48, Logistic Regression is presented and evaluated using benchmarking Parkinson disease data set which are collected from UCI machine learning repository. The extraction of hidden data present in the dataset is obtained using WEKA environment. The results from the prediction models gives better clinical decision-making support to the doctors in predicting disease earlier and risk level. 05 30 2020 1354 1359 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.F4821.059720 https://www.ijitee.org/portfolio-item/F4821049620/ Assistant Professor, Chaitanya Bharathi Institute of Technology-Hyderabad Krishna Kumar* D. Deepika Assistant Professor, Mahatma Gandhi Institute of Technology-Hyderabad Nanomechanical computational systems proposed by K.Drexler is one of the approaches to molecular scale electronic circuits for memory and logic applications. The nanomechanical rod logic proposed is distinguished by its small size and very low energy dissipation, compared to transistors. it has been found from the sources available to us, that presently the idea was highly unexplored and still remains in its nascent stages This paper presents the use of nanorods as variant to the existing silicon technology for the design of a full adder circuit along with the speed, power and energy dissipation characteristics. The full adder circuit is then extended to an n-bit adder (which forms the basis of an ALU circuit). The paper also addresses the use of parallel architectures to overcome the limitations of switching speeds. 05 30 2020 18 21 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4839.059720 https://www.ijitee.org/portfolio-item/G4839059720/ Assistant Professor,Dept. of Computer Applications,Jindal College for Women, Bangalore, Karnataka,India. Latha H R* Dr. A. Rama Prasath Assistant Professor (Selection Grade), Department of Computer Applications, Hindustan Institute of Technology and Science, Chennai, India.. Protection of digital data is the utmost requirement of the day. Everything in the world is being upgraded to electronic communication and which requires protection against data fraud. Data is nowadays not only text but image, audio video individually and sometimes together as multimedia files. Encryption algorithms protect data against attacks and hackers. This paper proposes a new Sealion Optimization algorithm for enhanced image security, analyses several recent developments in encryption and decryption algorithms and summarizes different approaches, their benefits and limitations. 05 30 2020 22 25 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4841.059720 https://www.ijitee.org/portfolio-item/G4841059720/ M.Tech, ECE department, Asst. professor of Bapatla Women’s Engineering College, Acharya Nagarjuna University, Andhra Pradesh, India. K. Srilatha* M. Udaya Sri ECE department, Bapatla Women’s Engineering College, Acharya Nagarjuna University, Andhra Pradesh, India. G. Udaya Lakshmi ECE department, Bapatla Women’s Engineering College, Acharya Nagarjuna University, Andhra Pradesh, India. M.G. Vineela ECE department, Bapatla Women’s Engineering College, Acharya Nagarjuna University, Andhra Pradesh, India G. Varapriya ECE department, Bapatla Women’s Engineering College, Acharya Nagarjuna University, Andhra Pradesh, India. CH. Suneetha ECE department, Bapatla Women’s Engineering College, Acharya Nagarjuna University, Andhra Pradesh, India. Now a day’s satellite image processing plays a major role. By using remote sensing technique, we can classify the satellite images like LISS (Linear image self-scanner), LANDSAT satellite image by using ERDAS imagine software. By using ERDAS imagine software, the classification of an satellite images will take more time. Rather than ERDAS imagine software we can use NEURAL NETWORKS in MATLAB software for classifying the satellite images by using the corresponding code with respect to the image by simply changing the file name. This paper includes the method like supervised and classification by using ERDAS imagine software and MATLAB code. The aim of this projects is to realize the image classification using NEURAL NETWORKS. 05 30 2020 26 31 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4847.059720 https://www.ijitee.org/portfolio-item/G4847059720/ Department of civil engineering, Chandigarh University, Mohali, Punjab, India. Mustafa Hussaini* Sandeep Nasier Department of civil engineering, Chandigarh University, Mohali, Punjab, India. In this paper bracing, diagrid and outrigger system have been analyzed for comparing the seismic performance of multistorey buildings. Bracing system is a very efficient system which can be used as a lateral load resisting system in concrete and steel buildings, in this system lateral loads are transferred through lateral bracing by undergoing in tension and compression .diagrid is another effective and efficient system that can be used as lateral load resisting system in steel and concrete tall buildings, in this system lateral loads are transferred by inclined members of the building. Another very effective system which commonly used for resisting lateral loads in concrete and steel high rise building is outrigger system, in this system lateral loads will be resisted by outrigger belt truss and core shear wall. Location and number of outrigger and type of bracing is very important which needs to be optimized in this system. In this paper comparison of bracing, diagrid and outrigger system have been studied on a 24 storey by using a standard package of ETABS 2017. 05 30 2020 32 36 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4860.059720 https://www.ijitee.org/portfolio-item/G4860059720/ Research Scholar, Department of Computer Science and Engineering, GSSSIETW, Mysuru, affiliated to VTU Belagavi, India. Tejaswini R Murgod* Dr. S Meenakshi Sundaram Professor and HOD, Department of Computer Science and Engineering, GSSSIETW, Mysuru, affiliated to VTU Belagavi , India. In underwater Wireless Sensor Networks (UWSN) the node mobility is higher as the nodes drift with the water so identifying the exact location of the nodes is a challenging task. Terrestrial WSN use Global Positioning System (GPS) to locate the nodes, but the same cannot be applied for UWSN as they do not propagate under water. Underwater uses acoustic channel for communication which suffers from low bandwidth, high propagation delay, high bit error rate, high node mobility and variable sound speed which makes localization a challenging task. Hence there is an evolving requirement for energy efficient localization algorithm. To overcome these problems we propose an Energy Efficient Cluster Based Localization Algorithm (EECBLA) to minimize the energy utilization and identify an accurate location of the sensor nodes. EECBLA is a cluster based localization protocol where the GPS enabled high power anchor nodes are utilized to estimate the location of the un localized sensor nodes. To improve the localization accuracy it is necessary to improve the network connectivity. Network connectivity can be improved by increasing the lifetime of the sensor nodes. EECBLA proposes an energy efficient localization scheme where the node operates in active and sleep mode to efficiently utilize the available energy. In this research work we take a sample example and demonstrate how the location is estimated through TOA and Euclidean distance. Accuracy of TOA is measured as 8.36, 4.76, 13.21, 14.85, 16.26 and 3.60. The average estimated localization error of EECBLA is around 4m to 6m. EECBLA localization error is compared with other localization algorithms like 3DUL whose average localization error is 5m to 10m, SDMA whose average localization error is around 24% and localization error of Hybrid RSS ranges from 4.69m to 15.85m. When compared with these methodologies there is a decrease in localization error by 3%, and the increase in accuracy by 5% in EECBLA protocol. 05 30 2020 37 42 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4861.059720 https://www.ijitee.org/portfolio-item/G4861059720/ Department of Computer Application, TN.D.A.L.U, India Dr. R. Varalakshmi* In the 21st century, Media technology plays a vital role in every individual’s life. The world of electronic media, found an exponential growth. Presently the media world is filled with gadgets includes TV, mobile phones, emails, egames, interactive internet games, virtual reality games, iPods, instant messenger, esports, social networks etc.. This makes the physical world smaller in today’s days and helps in effective communication ranging from text messaging, multimedia message, video conferencing, virtual meetings and so on. As of today, social networks including Facebook, Twitter, Wordpress, Whatsapp, LinkedIn, Blogger, Google, Pinterest, and Wikipedia etc. has become the most powerful sources for sharing information and news updates. In addition, the cost of smartphones and internet data are reducing which makes easy penetration of this technology among people. Apart from the entertainment, the social networks created new business opportunities, sales promotions, marketing research, and customer relationship development etc. In this paper, the impact of social networks in family relationships is presented. 05 30 2020 43 46 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4863.059720 https://www.ijitee.org/portfolio-item/G4863059720/ Computer Science department, Government College For Women, Panchkula,India. Sapna Malik* Dr. Kirti walia University Institute of Computing, Chandigarh University, Chandigarh, India. With increasing usage of technologies and smart solutions smart cities are developed and enabled with many smart services. This paper has conducted a systematic literature review to find out IOT applications and its role in Traffic Control System. The review protocol is formulated to define some of the research questions, searching strategy, selection criteria of papers and how data is extracted. This paper contributed towards one main issue: The various research areas of Internet of Things and Role of IOT in the Traffic Control Services? All the papers were categorized by the application services of IOT and Traffic Control services they discussed. All the recent work were categorised under the application in various area like traffic and transport; Agriculture; Security; Healthcare; energy management; city infrastructure; and modes of transport. This paper reviews the various methods of traffic control system in different perspective of different IOT application areas. 05 30 2020 47 50 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4866.059720 https://www.ijitee.org/portfolio-item/G4866059720/ Department of Computer Applications, NIT Raipur, Raipur, C.G., India. Pinkey Chauhan* Mithilesh Atulkar Department of Computer Applications, NIT Raipur, Raipur, C.G., India. Separating out control plane from the forwarding plane is the core idea of Software Defined Networking (SDN). Control plane has the complete decision making logic and the forwarding plane is restricted to just follow the instructions given by control panel i.e. it is concerned with just forwarding the data. This part of decision making in the control plane is looked after by the Controller, so it is the most important component of the SDN. Depending upon the main objective of the created network a wise selection of the controller is important so that it can provide maximum performance for the said objective. Depending upon the need, if a right controller is selected it will give more enhanced performance as compared to a randomly selected controlled which is not made for the said objective. In this paper four Java based controllers namely Beacon, OpenDaylight, Floodlight and ONOS have been taken and their suitability has been checked for the performance measuring parameters namely throughput, jitter, packet loss and latency in TCP and UDP traffic of the network. Out of these four controllers, two controllers namely ONOS and OpenDaylight are distributed controllers whereas Beacon and Floodlight are centralized controllers. All the controllers have been run in centralized manner one at a time and the performance measuring parameters have been evaluated for TCP and UDP traffic. Logic behind running distributed controllers in centralized manner is to compare their performance with pure centralized controllers if they are run in centralized manner. TCP is a connection oriented protocol and due to its property of error checking, packet retransmission, congestion control mechanism etc measurement of throughput in TCP traffic is more important than measuring it for UDP traffic so throughput has been checked in TCP traffic. UDP is connection less data transmission protocol which is basically used with the applications which send data sporadically or send stream data where small amount of data loss can be accepted. So, two parameters concerned with UPD traffic namely jitter and packet loss have been evaluated with UDP traffic of the network. It has been analysed that Floodlight is performing best for throughput in TCP traffic when the size of the network is increasing. In case of jitter and delay ODL is performing best in UDP traffic. In case of Packet Loss Beacon is best. Mininet has been used as emulator to create the tree networks of different depths. iperf has been used as TCP and UDP traffic generator. 05 30 2020 268 274 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4868.059720 https://www.ijitee.org/portfolio-item/G4868059720/ Civil Engineering, National Institute of Technology Calicut, Calicut, India. B Venkata Subbaiah* Santosh G Thampi Civil Engineering, National Institute of Technology Calicut, Calicut, India. Nimma Rambabu Civil Engineering, National Institute of Technology Calicut, Calicut, India. V Mustafa Civil Engineering, National Institute of Technology Calicut, Calicut, India. M Abdul Akbar Civil Engineering, Dr. B.R. Ambedkar National Institute of Technology, Jalandhar, India. In this study, analysis of the hull forms of traditional vessels in Kerala, viz., Snake boat, Uru and Houseboat have been studied. Ideal draft from wave cut analysis, estimation of drag forces, pressure and velocity contours on the surface of the hulls has been studied using a proposed 3-D model. The CFD package SHIPFLOW 5.1® has been used for the hydrodynamic analysis of ship/vessel in this work. The wave-elevation vectors (Kelvin wave pattern) at different Froude numbers and the different draft has been evaluated along the length of the vessel. The results show that that out of the total drag force experienced by a Snake boat at the ideal draft, 66.8% is attributed to the frictional drag and only 33.2% is wave-making resistance drag. These values change to 73.1% and 26.9% respectively for Uru and 23.7% and 76.3% for a Houseboat. With regards to the magnitude of resistance drag values, the total resistance experience by an Uru when compared to Snake boat and Houseboat are 30.16 and 1.17 times respectively. It has also been found that the presence of the skeg improves the hydrodynamic performance of the Houseboat considerably. The findings will be useful to design these boats considering its specific applications. 05 30 2020 132 149 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4874.059720 https://www.ijitee.org/portfolio-item/G4874059720/ Electrical engineering department, college of engineering, Qassim University, KSA. Saad A. Eltarfawi* Ahmed A. Mahfouz Electrical engineering department, college of engineering, Qassim University, KSA. A QZSI with an energy storage system is developed for standalone applications. A controller based on the battery-assisted Quasi Z-Source Inverter model is designed to achieve both MPPT from the solar panels and to control the battery State of Charge (SOC). The control strategy will control both MPPT and Battery SOC through the shoot-through duty ratio (D) and Modulation index of the inverter (M). The simple boost modulation technique is adopted for the inverter switching strategy. The performance of the designed system is verified using simulation. 05 30 2020 1309 1314 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4877.059720 https://www.ijitee.org/portfolio-item/G4877059720/ ECE department, KL University, Vijayawada, India G. Yashaswini Sree Neha* L. Rajani ECE department, KL University, Vijayawada, India B. Santosh ECE department, KL University, Vijayawada, India Glaucoma is a autistic eye disease and major causes of firm blindness worldwide. For this we are trying to design a tool for early detection of glaucoma. In this paper glaucoma detection is based on the algorithm of retinal fundus images[1]. A supervised techniques for the detection of glaucoma is used. For the extraction of the features of the images we used PCA(principal component analysis). And for the classification support vectors are used. It shows mainly an artificial intelligent system for the segmentation of optic disk and cup. The accuracy of this model is comparatively much more greater than previously designed neural architectures. 05 30 2020 336 339 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4879.059720 https://www.ijitee.org/portfolio-item/G4879059720/ Assistant professor, Department of Civil Engineering, Christian College of Engineering and Technology, Dindigual, India. Abiraami. R* Johnpaul. V Assistant Professor, Department of Civil Engineering, Karpagam Academy of Higher Education, Coimbatore, India. Dr. R. Anuradha Professor, Department of civil engineering, SNS college of technology, Coimbatore, India. Kalaivaani R Assistant professor, Department of civil engineering, Sri Ranganathar institute of engineering and Technology, Coimbatore, India. Now a days construction gets delayed in the site due to the factors such as inefficient management, design issues, economic variation, coordination failure between time schedule and execution etc. The major problem faced by the construction sector is not able to manage the fund allocated for the work and not able to complete the work in targeted days. This can be overcome by the implementation of scheduling and cost optimization process in the construction field. Scheduling is a critical component of successful time management. Optimizing cost should be carried out to aware the building cost is kept within the estimated cost limits .This paper deals with scheduling of multi-story building and cost effective method to find required cost for completion of the project. On going project is located at Nagar Kovil and Manual scheduling data collected from the site. Scheduling of the project is done with primavera p6 software. Cost required for the project is also computed with primaveraP6 software. For reducing the cost of the project, required actions are taken. The cost is reduced by proper using of resources, such as manpower, materials and machines. Computerized scheduling provides clear scheduling data for execution of the project. Cost required for the project execution is also reduced with proper scheduling process. Cost is optimized by using a dynamic programming method. Microsoft excel is used for dynamic method of cost optimization. In this project cost is considerably reduced by using the dynamic programming method of cost optimization techniques. 05 30 2020 75 80 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4890.059720 https://www.ijitee.org/portfolio-item/G4890059720/