-74813b3e17f460286df-4a35 20220415052439922 beie:beie director@blueeyesintelligence.org WEB-FORM International Journal of Innovative Technology and Exploring Engineering IJITEE 22783075 10.35940/ijitee https://www.ijitee.org/ 05 30 2020 9 7 Teaching and Learning Development Center, Mangosuthu University of Technology, South Africa. Dr. Kehdinga George Formunyam* The process of change from a crude, agrarian economy to one dominated by industry and heavy machineries has taken a new facelift in the fourth industrial era. This era has in it a fusion of technologies in the physical, digital and biological sphere which can have profound impact on all industries and cause a shift in the models of business globally. There is a shift in the order of events and the fourth industrial revolution has with it velocity and exponential rate, breadth, and depth of convergence and its attendant import on industries, firms, government and the society at large. This research was framed as a qualitative study and a theoretical approach was used in providing support for the major thematic areas in this research article. A review of relevant pieces of literature in line with the topic under consideration was done to address the topic critically. This study reveals that there is a need for change along engineering lines since the traditional development models that have contributed to growth in the past might not be appropriate to maintain growth in the future. Exposing the need to have new techniques and business models that will influence present and future processes, this study recommends a rapid adaptation to global breakthroughs by South Africa, in order to ensure that all stakeholders vital to the educational, political and economic policies in South Africa, synergize to have in place factors that will ensure rapid uptake and local development of this emerging innovations. 05 30 2020 1116 1120 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4895.059720 https://www.ijitee.org/portfolio-item/G4895059720/ Assistant professor, Department of CSE, GCET, India K. Preethi* U. Sadhana Assistant professor, Department of CSE, GCET, India G. Udaya Sri Assistant professor, Department of CSE, GCET, India In earlier times planters utilized to figure the perfection of soil as well as influenced uncertainties to establish which to type of turnout. They failed to consider the humidity, degree of water and especially weather disorder which horrible a farmer significantly the Internet of things (IOT) is remodelling the agri-business enabling the agriculturists with the significant stable of approaches. IOT is actually extended with actuators as well as sensing units. The principal aim is to gather the analyses coming from various nodules and assist the planters deal with different operations for wise planters providing a clever agrarian area. 05 30 2020 51 54 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4901.059720 https://www.ijitee.org/portfolio-item/G4901059720/ Department of Mechanical Engineering, College of Engineering, Qassim University, Buraidah 51452, Saudi Arabia. Hany R. Ammar S. Sivasankaran Department of Mechanical Engineering, College of Engineering, Qassim University, Buraidah 51452, Saudi Arabia. Abdulaziz S. Alaboodi* Department of Mechanical Engineering, College of Engineering, Qassim University, Buraidah 51452, Saudi Arabia. High entropy alloys (HEAs) are formed by mixing of five or more elements with equal or large proportions. In the current study Al0.3Cr-FeNiCo0.3Si0.4 nanostructured high entropy alloy (HEA) is produced by means of mechanical alloying. The as-received elements in the powder form were processed in a high-energy ball mill with a ball-to-powder ratio (BPR) 15:1 and a speed of 300 rpm. Two Al0.3Cr-FeNiCo0.3Si0.4 alloy samples were produced with the same variables except milling time where alloy A was milled for 1 hr while alloy B was mechanically alloyed for 25 hr. Milling time is increased from 1 to 25 hr to allow the formation of the solid solution of the elements and the synthesis of high entropy alloy. The as-received powders were examined by Apreo field emission gun scanning electron microscope (FEGSEM). The distribution and dissolution of the elements in the produced alloys was examined using energy dispersive spectroscopy (EDS) attached to a high resolution scanning electron microscope system (FGSEM). 05 30 2020 275 278 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4919.059720 https://www.ijitee.org/portfolio-item/G4919059720/ Department of Computer Science and Engineering, Sri Shakthi Institute of Engineering and Technology, Coimbatore, India. Hemalatha. S Pranesh S* Department of Computer Science and Engineering, Sri Shakthi Institute of Engineering and Technology, Coimbatore, India. Kanagasabapathy P Department of Computer Science and Engineering, Sri Shakthi Institute of Engineering and Technology, Coimbatore, India. Nirmal Kumar R Department of Computer Science and Engineering, Sri Shakthi Institute of Engineering and Technology, Coimbatore, India. In recent times it has become necessary for any business to have an online platform to remain relevant and competitive. Because of this necessity, many businesses including small enterprises now operate an e-commerce web store to increase sales and attract new customers. Moreover, entrepreneurs don't need to stress over finding a spot to raise their stores and clients can have unhindered access to a wide scope of items whenever they need and at anyplace on the planet. The online stores or ecommerce websites are very useful to the people who have difficulty in accessing the outside world. While these websites are useful for other physically challenged people, most of the websites are not designed to be usable by visually impaired, partially blind or even color-blind people. The different types of blindness are surveyed in this paper and the paper proposes a framework that uses various techniques to aid the visually challenged, partially impaired person or color-blind people. An online food ordering website is developed using the framework and is tested by making the website available for use for visually blind, partially blind and color blind. The test results show that the framework had increased the usability of the website by them. 05 30 2020 55 58 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4924.059720 https://www.ijitee.org/portfolio-item/G4924059720/ Department of ECE, KPR Institute of Engineering and Technology, Coimbatore, India. K. Kalirajan* D. Venugopal Department of ECE, KPR Institute of Engineering and Technology, Coimbatore, India. V. Seethalakshmi Department of ECE, KPR Institute of Engineering and Technology, Coimbatore, India. K. Balaji Department of CSE, SNS College of Engineering and Technology, Coimbatore, India. Face recognition is first and foremost step in video surveillance applications which include human behavioral analysis, event detection, border security and ATM banking. Most of the time, it is very difficult to get good facial features from the particular image frame and it often requires sophisticated algorithm for face identification and recognition. Robust face detection system is still a more challenging job because of complex environments including illumination changes, background clutter and occlusions. This article presents a novel feature extraction algorithm for face recognition using edge detection and thresholding. Initially, the incoming image is preprocessed to smoothen the image features and it is converted in to grayscale image to reduce the computational complexity of post processing steps. In feature extraction step, the image is completely iterated throughout the spatial coordinates and the edges are detected using thresholding technique. The optimum threshold for global thresholding is identified by calculating the maximum between-class variance in the given image. The extracted edge features are invariant under scale and illumination changes and thus it ensures the robust binary mask for face identification. Finally, the foreground features are obtained using morphological operations and the face is highlighted in subsequent incoming image frames. The proposed method can be deployed in public places such as malls, ATM centers and airports for security applications. Experimental results clearly indicate that the proposed approach works well under complex situations. 05 30 2020 59 63 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4927.059720 https://www.ijitee.org/portfolio-item/G4927059720/ Department of Information Technology, Kongu Engineering College, Erode, India. Vinoth Kumar S* Akshaya A G K Department of Information Technology, Kongu Engineering College, Erode, India. Adithya N Department of Information Technology, Kongu Engineering College, Erode, India. Gokulnathan P Department of Information Technology, Kongu Engineering College, Erode, India. In Equity Market Forecasting, the goal is to predict the upcoming value of the financial stocks of a company. The current method in equity market forecasting is the use of machine learning which build to predict the values of recent equity market indices by training on their past values. Machine learning itself engage disparate models to forecast easier and authentic. The project focuses on the use of Regression and UP-TREE based Machine learning to forecastt stock values. The many factors thought-about are open, close, low, high and volume. During this project, a serial model has been created that involves stacking 2 LSTM layers on high of every alternative with the output price of 256. The input to the layer is within the style of 2 layer[0] and layer. A dropout price of 0.3 has been fastened which suggests that 0.3 out of total nodes are frozen throughout the coaching method to avoid over-fitting of knowledge. The core dense layer wherever every somatic cell is connected to an alternative within the next layer is providing input of thirty-two parameters to subsequent core layer which supplies output as one. The model is evaluated with a mean sq.price operate to take care of the error throughout the method and accuracy is chosen as a life to forecast. 05 30 2020 190 194 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4935.059720 https://www.ijitee.org/portfolio-item/G4935059720/ Department of Electrical Engineering, Govt. College of Engg., Chandrapur, India. Praful V Nandankar* Prashantkumar V Dhawas Department of Electrical Engineering,Govt. College of Engg., Chandrapur, India. This paper presents an automatic power factor correction unit which reduces system power loss and improves system performance by increasing the efficiency. Power wastage, now a days, is a global issue and hence proposed unit provides cost and energy effective solution. The increased use of inductive loads results in poor power factor in various residential locations. Therefore, a need to enhance the power factor of system increases in a present scenario and power factor can easily be improved by employing suitable techniques of power factor correction. The proposed technique improves the power factor and restores its value close to unity for efficient operation. The increased power factor reduces the system losses which in turn improves the voltage at load end. The corrected power factor also enhances the load carrying capability of an entire network. The proposed technique to improve the power factor, monitors the energy consumption continuously and automatically improves the power factor. The proposed technique discussed in this paper is possible with the help of 8051 microcontroller. The 8051 microcontroller senses time-variant values i.e. line voltage and line current from the system and these time variant values are further utilized to obtain phase angle and corresponding power factor. These two time variant values are calibrated properly to obtain the desired power factor. It also determines the range of power factor and depending on the power factor, it incorporates the capacitor in shunt across the load which in turn improves the power factor. The power factor correction device is designed and tested under load conditions and it is found that the power factor value is increased from 0.71 to 0.96. The average savings in energy consumption is also found to be 1.5% for load used for this proposed technique. There is significant saving in energy cost due to compensation of reactive power. 05 30 2020 574 578 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4937.059720 https://www.ijitee.org/portfolio-item/G4937059720/ Student, Master’s Degree, Structural Engineering, Chandigarh University (CU), Mohali, Punjab India. Mohmmad junaid wani* Dr. Mohit Bhandari Assistant Professor, Department of Civil engineering, Chandigarh University, Mohali, Punjab, India. Rajeev Assistant Professor, Department of Civil Engineering, Chandigarh University (CU), Mohali, Punjab, India. Due to rapid on-going horizontal development and restricted vertical development of buildings has resulted in congestion of cities and shrinkage of agricultural land, particularly in high seismic zones. For vertical development, there is a need for the construction of buildings as high as possible. The restriction to the vertical development is due to the reason that high rise structures are more vulnerable to lateral loads acting on the building resulting from the seismic events. With a background in view, the current work studies the seismic responses of a multi-storey complex building with concrete-filled steel tube columns (CFST). In present work, CFST columns of different sizes were used for the study of a Ground+12 storey building with plan dimensions 35m x 30m, situated in seismic Zone-V and medium soil type as per IS 1893-2016 classification. The Response spectrum analysis was carried out for different building models as per IS 1893:2016 provisions. E-TABS software was used for three-dimensional modelling and analysis of buildings. Several response parameters like fundamental time period, maximum storey displacement, maximum storey drift, storey shear and overturning moment are considered in this study to evaluate the performance of the building. It was concluded that CFST columns perform well for high seismic zones even at smaller cross-sectional dimensions. 05 30 2020 195 201 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4938.059720 https://www.ijitee.org/portfolio-item/G4938059720/ Masters, Structural Engineering, Chandigarh University (CU), Gharuan, Punjab, India. Nasir Ali* Himanshu Guleria Assistant Professor, Chandigarh University (CU), Gharuan, Punjab, India. Himashu Sharma Design Engineer (Highways and Bridges), SMEC India Private Limited, Gurugram, India. In the present study, modeling and analysis of a three-lane three-span box bridge has been carried out by using finite element software STAAD pro.v8i. The study has been execute to find the effect of skew angle on all bride slabs (top slab, bottom slab, outer walls, inner walls) under various loads (dead load, live load, surfacing load, earth pressure, temperature and live load surcharge) and their combinations using IRC 6:2016. Skew angles taken for study ranges from 00 to 700 with an interval of 100. Parameters that are mainly examined are longitudinal moments, transverse moments, torsional moments, shear forces and displacements. It has been observed that with the increase of skew angle all the parameters increases with the increase of skew angles in all slabs. 05 30 2020 64 69 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4941.059720 https://www.ijitee.org/portfolio-item/G4941059720/ Assistant Professer, Electronics and Telecommunications Department ,SVERI’s College of Engineering, Pandharpur. Prof. Manoj A. Deshmukh* Miss. Pratiksha V. Sanjekar Student of B.E of Electronics and Telecommunications Department, Studied in SVERI’s College of Engineering, Pandharpur. Miss. Sayali S. Patil student of B.E of Electronics and Telecommunications Department, Studied in SVERI’s College of Engineering, Pandharpur. Miss. Dnyaneshwari S. Maradkar student of B.E of Electronics and Telecommunications Department, Studied in SVERI’s College of Engineering, Pandharpur. Now a days we face such a lot of problems associated with road. To avoid this problem many methods has implemented but still problem is not fixed. In past days manual methods are used for inspection of road but due to traffic manual method does not work properly. Also manual method takes lot of time and still gives wrong output. To resolve all this problems we used this advanced techniques to detects the condition of road. Automatic detection of potholes and humps is used for sending the alert to government authority for maintenance of road. To find out the poor condition of roads such as potholes and unequal elevation to avoid accidents and damage of vehicles this projects is very much useful. Here, Ultrasonic sensors are used to analyze and calculate the depth and height of potholes as well as humps. Ultrasonic sensors uses ultrasonic waves to find out the distance between sensor and target object. To find out correct geographical position coordinates of the potholes and irregular humps we will be using the receiver of GPS. The data which is sensed by GPS includes pothole and hump location in the form of latitude, longitude, which is stored in the server. This gives information to the government authorities about the correct position. So that, government can take all possible decisions related to maintenance as early as possible and avoid accidents based on data provided by the GPS. Once the problem will be rectified the database updates accordingly and alerts or notification is given through short message service. 05 30 2020 533 535 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4946.059720 https://www.ijitee.org/portfolio-item/G4946059720/ Associate Professor Department of Mechanical Engineering, Godavari Institute of Engineering and Technology, (Autonomous) Rajahmundry, India E. Nirmala devi* T. Rajesh PG Scholar Department of Mechanical Engineering, Godavari Institute of Engineering and Technology, (Autonomous) Rajahmundry, India Day by day a huge measure of research is proceeding to discover the cooling solutions for electronics including various applications for CPU, LED coolers, relay cooling frameworks. The serious issue including electronic parts cooling is the structure of heat sinks and their compatibility with the electronics for the predefined applications. Likewise, the quick-paced progressions in computing driving for the production of superior processors with incorporated complex circuits for which the cooling turned into a troublesome task which became challenging the existing market. This study targets building up a metal matrix composite (MMC) heat sink for low coefficient of thermal expansion (CTE) in electronic parts. Aluminum nitrate (AlN) takes like 12.5% (wt/wt) and mixed Aluminum (Al) to form metal matrix composite (MMC) prototype heat sinks. Prototype metal matrix composite (MMC) properties were evaluated experimentally. The modeling of the laterally perforated finned heat sink (LA-PFHS) is done Solid-works. The sinks are fabricated by using CNC machining. Two configurations of circular piercings on the fins are used in which the diameter and the spacing between piercings vary. In a rectangular insulated duct, the experimental analysis on the three metal matrix composite (MMC) heat sinks was performed under the phenomenon of forced convection at varying heat fluxes and at ambient conditions of temperature 30°C, pressure 101.326 KPa and 45% humidity. From 1.0 m/s to 4.0 m/s wind velocities and with an interval of 1 m/s the experimentation were carried out. Results show that the model III prototype metal matrix composite (MMC) heat sink proposed in this study shows a decrease in thermal resistance (Rth) by 50.51 %. 05 30 2020 1323 1331 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4951.059720 https://www.ijitee.org/portfolio-item/G4951059720/ Pursuing Research, Department of Mechanical Engineering in KL University, Vijayawada, Andhra Pradesh, India Gari Surya Chandra Swamy* P. Jamaleswara Kumar Doctorate Degree, Mechanical Engineering from Andhra University, Visakhapatnam, Andhra Pradesh, India U.S Ramakanth PhD degree in Mechanical Engineering from Andhra University, Visakhapatnam, Andhra Pradesh, India The current work expects to decide the attributes of compression of the (Magnesium composite) AZ 91E-Zro2-Fly Ash Hybrid Metal Matrix utilizing the conventional explanatory strategy and limited component technique. Fly ash and ZrO2 taken as equal weight proportions, composites are fabricated by means of a vortex method under the path of stir casting. The density and fracture toughness were found experimentally, the experimental density was decreased compare to the theoretical density, but the density is increased slightly for composites compare to the base material. The fracture toughness is decreased for composites compare to the base material; this is due to the improvement of the grains by adding strengthening molecules. The compressive strength was decreased by decreasing of the height of the deformation in percentage for base material and the composites of H/D 1.0 and 1.5. The compressive strength is high for the composites compare to the base material even the density of the composite is little bit high, hence suggested that composite system gives the better compressive strength results 05 30 2020 163 167 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4956.059720 https://www.ijitee.org/portfolio-item/G4956059720/ Assistant professor , Department of Electronics and Communication Engineering , Thapar Institute of Engineering & Technology, Patiala,India. Harpreet Vohra* Ashima Singh Assistant Professor, Computer Science and Engineering Department, Thapar Institute of Engineering & Technology, Patiala,India. The 3D System-on-chip (SoC) technology supports the vertical interconnectivity required for the purpose of functional, supply and test access purposes through the use of Through Silicon Vias (TSVs). Little number of available TSVs for test purpose necessitates the optimization of test infrastructure. This paper proposes an algorithm to design the test wrapper for the 3D cores such that the number of the TSVs used per TAM chain are minimized. Test time optimization is done by balancing the lengths of the individual Wrapper chain inside the core. The proposed heuristic firstly distributes the different core elements on the given TAM chains and then uses a diagraph for their insertion ordering to get minimum possible TSV utilization. Simulation results are presented for the different cores of the ITC’02 SoC benchmark circuits. Results show that TSVs can be reduced to 20-30 percent with around 60-70 percent reduction in CPU time utilization for heavy SoCs in comparison to the other proposed techniques. 05 30 2020 279 285 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4957.059720 https://www.ijitee.org/portfolio-item/G4957059720/ Student, B.E of Electronics and Telecommunications Department studied, SVERI’s College of Engineering, Pandharpur. Miss. Sucheta B. Yelmar* Miss. Prajakta P. Pathak Student, B.E of Electronics and Telecommunications Department studied, SVERI’s College of Engineering, Pandharpur. Miss. Prajkta K. Wakade Student, B.E of Electronics and Telecommunications Department studied, SVERI’s College of Engineering, Pandharpur. Prof. Sneha S. Kadam Professor, Department of Electronics and Telecommunications, SVERI’s college of engineering, Pandharpur. At this time, children security is a main problem that has to be reduced. Parents are facing problems while their child is travelling through school buses. The problems are like they sometimes can’t identify the locations of school buses, they can’t identify the accidents of buses etc. Our paper presents a solution over this. We tried to reduce some problems of parents. Our system is a tracking system that gives live location to parents mobile including longitude, latitude, date and time. Also gives alert when some problem occurs in bus like fire. This data is to be stored on ThingSpeak. The ThingSpeak is the Internet of Things application. This used to store and retrieve the data via local area network. 05 30 2020 419 421 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4960.059720 https://www.ijitee.org/portfolio-item/G4960059720/ Associate Professor, Department of Electrical Engineering, Annamalai University, Annamalai Nagar, Tamilnadu, India Dr. R. Geetha* Dr. M. Ramaswamy Professor, Department of Electrical Engineering, Annamalai University, Annamalai Nagar, Tamilnadu, India This work explores a novel multilevel inverter (MLI) topology to minimize the number of power switches in the passage of current to accomplish each level of the output voltage. The unequal magnitudes of the dc voltage sources in attempt to realize higher levels of the output voltage bring in the asymmetrical nature of operation. It involves a series parallel switched configuration with bidirectional switches to avert the flow of circulating current in between the two H - bridges in each phase of the MLI. The effort incites to use the theory of a new Pulse Width Modulation (PWM) strategy for mitigating the higher frequency components of the voltage applied to the stator. It imbibes the Phase Disposition (PD) principles in the modulating strategy for arriving at the sinusoidal shape for the output voltage . Total Harmonic Distortion (THD) indexed by lower values for the output voltage over the traditional firing scheme serves to be the highlight for the MLI in acclaiming its place in the inverter world. The results obtained through MATLAB based simulation over a range of modulation indices. The performance measured in terms of the THD claims its suitability for use in Induction Motor (IM) drives. 05 30 2020 728 737 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4970.059720 https://www.ijitee.org/portfolio-item/G4970059720/ Assistant Professor, Department of E.E.E. KHIT, Guntur, India, Mr.Sriramulu Naik Mudhavath* Dr.Gudapati Sambasiva Rao Professor, department of E.E.E., R.V.R & J.C.C.E., Guntur, India. Direct torque control is an utmost control technique to attain high performance of AC drives. This paper presents controlling of 3-phase Induction Motor (IM) fed from a 3-level Modular Multilevel Converter (MMC) topology which results in minimization of torque and flux ripples when compared to a 3-level Neutral Point Clamping (NPC) inverter based on Direct Torque Control(DTC). As well this in turn can reduce the Total Harmonic Distortion (THD) of the output current and voltage. In recent, modular multilevel converters are becomes popular due to their excellent scalability, redundancy and lesser harmonics for high power applications. The objective of this paper is to improve the steady state and dynamic performances of 3-phase induction motor fed from MMC with DTC using MATLAB/Simulation. 05 30 2020 1156 1160 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4977.059720 https://www.ijitee.org/portfolio-item/G4977059720/ Industrial Engineering, Institute of National Technology, Malang, Indonesia. Julianus Hutabarat* Ida Bagus Suardika Industrial Engineering, Institute of National Technology, Malang, Indonesia. Diah Willis L. Basuki Industrial Engineering, Institute of National Technology, Malang, Indonesia. Renny Septiari Industrial Engineering, Institute of National Technology, Malang, Indonesia. Anisa Ramadhani Magister Program, Postgraduate Institute of National Technology, Malang, Indonesia. Cleaning workers are jobs that require physical strength especially if the work is carried out at a height, and it is not uncommon to complain about musculoskeletal discomfort in physical areas that feel uncomfortable when working in an un ergonomic position. From the observation results If observed posture when cleaning wokers work, body position tilted and bent with angles ranging from 20°-60°, neck bent with an angle of about 20 °, cleaning is done repeatedly by shifting the left hand and right hand with the angle of the upper arm > 90° raised for 10 minutes and forearm around 40°, this illustrates the condition of awkward posture cleaning wokers not ergonomic, posture that is not ergonomic will cause musculoskeletal disorder. The purpose of this research is to measure the effect of stretching on mental workload in an effort to mental recovery. To achieve these objectives, first determine the type of glass cleaning activity outside the building at a height including: preparing tools, climbing stairs, cleaning glass, moving to other areas and cleaning tools, determining stretching movements, then conducting experiments in this case divided into 3 (three) treatment, first without stretching, giving stretching in the morning at 10 am for 6 minutes and stretching during the day at 2 pm for 6 minutes. Measurement of mental workload using the Subjective Workload Assessment Technique (SWAT) method, statistical processing by carrying out the covariance homogeneity test, Multivariate test and followed by the MANOVA test. The results of this research that stretching in addition to having a positive influence on the decline in mental workload, can also be used for mental recovery. Working at a height with a work posture that is not ergonomic, will increase the level of mental workload. 05 30 2020 286 295 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4982.059720 https://www.ijitee.org/portfolio-item/G4982059720/ Assistant Profeesor, Department of Computer Science And Engineering, Sri Shakthi Institute of Engineering and Technology Coimbatore Umamaheswari G* Sai Adharsh B UG Student , Department of Computer Science And Engineering ,Sri Shakthi Institute of Engineering and Technology, Coimbatore Shanjeev P UG Student , Department Of Computer Science And Engineering ,Sri Shakthi Institute of Engineering and Technology, Coimbatore Vignesh K UG Student , Department of Computer Science And Engineering ,Sri Shakthi Institute of Engineering and Technology, Coimbatore Thangai Bharathi M UG Student Department of Computer Science and Enginerring Sri Shakthi Institute If Engerring And Technology,Coimbatore In India most of the people are into social networks. Some people are taking advantage of this and spreading fake and irrelevant news in the society. Due to these major riots, culture oriented problems, fake medical messages are spreading over the people. Still there is no technology to identify these problems. Here we are introducing block chain to overcome all the above mentioned problems. Our method finds the solution for these major issues. Using the above mentioned explanation with SHA256 algorithms supports block chain a lot to implement. In case of any changes done in the mid node, using the hash function and SHA 256 algorithm, the man in the middle can be identified. The entire hash should be exactly match with the primary hash. So that data cannot be changed in the middle. In case of any changes occurred the data owner will be get notice. 05 30 2020 738 740 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.G4987.059720 https://www.ijitee.org/portfolio-item/G4987059720/ Department of Computer Science and Engineering, SRM Institute of Science and Technology, Chennai, India. G. Ragu K. Dheeraj Department of Computer Science and Engineering, SRM Institute of Science and Technology, Chennai, India. M. Rama Mohan Reddy Department of Computer Science and Engineering,SRM Institute of Science and Technology, Chennai, India. B. Venkata Sai Department of Computer Science and Engineering, SRM Institute of Science and Technology, Chennai, India. Object detection is as of now generally utilized in industry. It is the strategy for location and design of genuine items. Models incorporate intermittent scaffold examinations, debacle the executives, power line observation and traffic examinations. As UAV applications become progressively broad, more significant levels of self-sufficiency and free dynamic procedures are expected to improve the security, proficiency and exactness of the gadgets. This article exhibits in detail the method and parameters important for the preparation of convolutional neural systems (CNN) in the programmed acknowledgment of items. The potential areas of utilization in the vehicle division are additionally featured. The precision and unwavering quality of the CNNs rely upon the arrangement of the system and the determination of working parameters. The impact of article recognition shows that by picking a parameter setting course of action, a CNN can recognize and gather objects with a noteworthy degree of accuracy (97.5%) and computational profitability. Moreover, utilizing a convolutional neural system actualized in the YOLO stage (V3), items can be followed, distinguished and characterized progressively. 05 30 2020 224 227 CC-BY-NC-ND 4.0 10.35940/BEIESP.CrossMarkPolicy www.ijitee.org true 10.35940/ijitee.E3152.059720 https://www.ijitee.org/portfolio-item/E3152039520/