Comparative Analysis of PWM And Neural Network-Based Modulation Techniques for a 5 Level CHB Inverter
Amrita Baruah1, Aditya Bihar Kandali2, Pankaj Borah3
1Amrita Baruah, Department of Electrical Engineering, Jorhat Engineering College, Dibrugarh (Assam), India.
2Dr. Aditya Bihar Kandali, Professor, Department of Electrical Engineering at Jorhat Engineering College, Dibrugarh (Assam), India.
3Dr. Pankaj Borah, Assistant Professor, Department of Power Electronics and Instrumentation Engineering at Jorhat Institute of Science and Technology, Dibrugarh (Assam), India.
Manuscript received on 17 July 2026 | First Revised Manuscript received on 23 July 2026 | Second Revised Manuscript received on 08 August 2026 | Manuscript Accepted on 15 August 2026 | Manuscript published on 30 August 2026. | PP: 23-29 | Volume-15 Issue-9, August 2026 | Retrieval Number: 100.1/ijitee.J130215100926 | DOI: 10.35940/ijitee.J1302.15090826
Open Access | Editorial and Publishing Policies | Cite | Zenodo | OJS | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: This paper compares the performance of conventional Pulse Width Modulation (PWM) with an optimised Neural Network (NN)-based modulation strategy for inverter control. Although PWM remains one of the most widely used modulation techniques because of its simplicity and reliability, its performance is inherently limited by fixed linear switching schemes. An NN-based controller offers a different approach by learning switching patterns from the system, enabling better overall performance. To investigate this, we developed and evaluated both modulation methods in the MATLAB/Simulink environment under identical nominal operating conditions. The results indicate that the proposed NN-based controller provides a higher output RMS voltage, improved output waveform quality and lower Total Harmonic Distortion (THD) than conventional PWM. Together, these improvements lead to a cleaner output waveform and more effective use of the available DC source, without requiring any hardware modifications. The present study is limited to simulation and does not account for practical hardware non-idealities. Even so, the results suggest that the neural network’s learning capability can improve performance under nonlinear operating conditions. Future work will focus on real-time implementation using DSP/FPGA platforms, further optimisation of the learning algorithm, and exploring hybrid modulation techniques for multilevel inverters.
Keywords: 5-level Multilevel Inverter, Pulse Width Modulation, Neural Network, THD, RMS Voltage
Scope of the Article: Electrical Engineering