Design of Ultra Wideband Patch Antenna
Anjaneyulu Katuru1, Sudhakar Alapati2
1Anjaneyulu Katuru*, Anjaneyulu Katuru , Associate Professor, Dept. of ECE, Tirumala Engineering College, Narasaraopet, A.P, India.
2Sudhakar Alapati, Professor, Dept. of ECE, RVR & JC College of Engineering, Guntur, A.P, India
Manuscript received on January 14, 2020. | Revised Manuscript received on January 22, 2020. | Manuscript published on February 10, 2020. | PP: 3004-3006 | Volume-9 Issue-4, February 2020. | Retrieval Number: A4129119119/2020©BEIESP | DOI: 10.35940/ijitee.A4129.029420
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: This paper presents an ultra wideband(UWB) antenna which is in rectangular shape is designed and analyzed by Microwave Studio Computer Simulation Technology(MS CST).The antenna uses FR-4 substrate. The rectangular patch which is excited by micro strip line is printed on the top of the substrate and a partial ground plane is printed on the other side. The basic structure of antenna produces ultra-wideband characteristics. But these characteristics can further be improved by cutting the lower left corner of the patch as stair case and observed the simulated results like return loss(S11), voltage standing wave ratio(VSWR), gain and bandwidth(BW).
Keywords: UWB, Rectangular Patch, Return loss, VSWR, Gain, Bandwidth.
Scope of the Article: Microstrip Antenna design and application