Exploration of Electromagnetic Interference (EMI) on Shipboard Equipment
MA.Yahya1, Irfan Saad2, SH.Shamsudin3

1MA.Yahya, Marine and Electrical Engineering Technology, Universiti Kuala Lumpur, Jalan Pantai Remis, Lumut, Perak.
2Irfan Saad, Universiti Kuala Lumpur, Jalan Pantai Remis, Lumut, Perak.
3SH.Shamsudin, Marine and Electrical Engineering Technology. Universiti Kuala Lumpur, Jalan Pantai Remis, Lumut, Perak

Manuscript received on November 15, 2019. | Revised Manuscript received on 20 November, 2019. | Manuscript published on December 10, 2019. | PP: 4550-4554 | Volume-9 Issue-2, December 2019. | Retrieval Number: B9026129219/2019©BEIESP | DOI: 10.35940/ijitee.B9026.129219
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: The purpose of this research is to study about electromagnetic interference, its causes and effect and the effective method for reducing it on shipboard equipment. Electromagnetic interference is an electromagnetic disturbance or recognized as noise that can cause degradation performance of a device or a system on account of high density electromagnetic environment. In this research, a radar system circuit is designed in MATLAB Simulink for simulation and is analyzed by comparing the original signal transmitted by transmitter with the reflected signal on receiver. Radar system was chosen as radar has become one of the most important equipment on board ships. 
Keywords: EMI, Monostatic Pulse Radar, Simulation, MATLAB Simulink
Scope of the Article: Simulation Optimization and Risk Management