Multi-Response Enhancement of Drilling Process Parameters for AM 60 Magnesium Alloy as per the Quality Characteristics utilizing Taguchi-Ranking Algorithm and ANOVA
S.P. Sundar Singh Sivam1, Ganesh Babu Loganathan2, K. Saravanan3, S. RajendraKumar4
1S.P. Sundar Singh Sivam, Department of Mechanical Engineering, SRM Institute of Science and Technology, Kancheepuram Kattankulathur (Tamil Nadu), India.
2Ganesh Babu Loganathan, Assistant Professor Head, Department of Mechatronics Engineering, Tishk International University, Erbil Kurdistan Region-Iraq.
3K.Saravanan, Department of Mechatronics Engineering, SRM Institute of Science and Technology, Kancheepuram Kattankulathur (Tamil Nadu), India.
4S.Rajendra Kumar, Department of Mechanical Engineering, SRM Institute of Science and Technology, Kancheepuram Kattankulathur (Tamil Nadu), India.
Manuscript received on 05 February 2019 | Revised Manuscript received on 13 February 2019 | Manuscript published on 28 February 2019 | PP: 437-440 | Volume-8 Issue-4, February 2019 | Retrieval Number: D2732028419/19©BEIESP
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: This investigation shows the improvement of Drilling parameters on AM-60 Mg alloy made with the help of Gravity Die Casting and with reactions upheld symmetrical cluster with Grey relational analysis – GRA. Which Focuses on the streamlining of Drilling constraints utilizing the system to get least surface Roughness (Ra), Tool Wear, Cutting Time, Power Requirement and Torque and Max MRR. Concentrates on the optimization of drilling constraints utilizing the procedure to get minimum surface roughness (Ra), Thrust Force, Burr size and Circularity Error. An amount of drilling experiments remained conducted mistreatment the L9 OA on CNC Machining Center. The trails remained achieved on Mg alloy block cutting tool of an ISO 460.1-1140-034A0-XM GC3 of 12 mm diameter with Tool Angle 140 degrees, used throughout the experimental work beneath dry cutting conditions. This experimental study results like Ra, TF, CE, and BZ were analyzed. GRA & ANOVA was utilized to effort out the principal essential Spindle speed, feed rate, Titanium Coated for Drill Bits (TiN, TiAN, TiCN) with 0.020 in Coating Thickness manipulating the Reaction. The essential and collaboration effect of the data influences on the ordinary responses remain analyzed. The standard qualities and projected values are truly near.
Keyword: AM 60, Dry Drilling, Grey Relational Analysis Taguchi Method.
Scope of the Article: Manufacturing Processes