Determination of Anisotropy Value by Compliance Parameter for Titanium Alloy OT4-1
Mikhail V. Grachev

Mikhail V.Grachev, Senior Lecturer, Department of  “Technology of Production and Operation of Aircraft, Moscow Aviation Institute (National Research University) (MAI),  Engines” Moscow, Russia.

Manuscript received on 08 June 2019 | Revised Manuscript received on 13 June 2019 | Manuscript Published on 08 July 2019 | PP: 379-381 | Volume-8 Issue-8S3 June 2019 | Retrieval Number: H10950688S319/19©BEIESP

Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open-access article under the CC-BY-NC-ND license (

Abstract: The characteristic of a semi-finished product from a sheet of titanium alloy OT4-1 is the presence of anisotropy of mechanical properties along and across the direction of rolling (along and across the fibers). The purpose of the experiments was to establish magnitude of the anisotropy on the parameter of the compliance of the samples in these directions and to develop measures to reduce it. The tests were comparative in nature; circles with a diameter of 80 mm and a thickness of 0.5 … 1 mm served as samples.

Keywords: Titanium, Technology, Stiffness
Scope of the Article: Civil and Environmental Engineering