Smart Wrist Band for Women Safety
V. Krishna sree1, Jeevan Sai2, Kasha Ruchitha3, Gunda Saishma4

1V. Krishna sree*, Engineering ECE Vallurupalli Nageshwarao Vignana Jyothi Institute of Engineering and Technology, Hyderabad, India.
2B Jeevan Sai, Engineering ECE Vallurupalli Nageswarao Vignana Jyothi Institute of Engineering and Technology, Hyderabad, India.
3Kasha Ruchitha, Engineering ECE Vallurupalli Nageshwarao Vignana Jyothi Institute of Engineering and Technology, Hyderabad, India.
4Gunda Saishma , Engineering ECE Vallurupalli Nageshwarao Vignana Jyothi Institute of Engineering and Technology, Hyderabad, India.
Manuscript received on May 16, 2020. | Revised Manuscript received on June 01, 2020. | Manuscript published on June 10, 2020. | PP: 630-632 | Volume-9 Issue-8, June 2020. | Retrieval Number: H6544069820/2020©BEIESP | DOI: 10.35940/ijitee.H6544.069820
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: It has become quite difficult for today girls to move freely on streets. This has become a constant matter of worry and safety regarding their safety. There has been a tremendous increase the harassments against women these days. 54%of all the harassments registered are women harassments. We can’t change the society but we can increase the security of girls. This proposed system for women consists of a wearable safety device which operates with sos button. This project is built using raspberry pi, GSM module and GSM modem. The sos button is provided in the band. If women get into any trouble, then if she presses sos button then the message is sent to registered mobile number. The message along with the location details is sent to the already registered mobile numbers and other emergency contacts. The location of the user is tracked using GPS. The LCD display will display the status of the project. This tracking system is a combination of raspberry pi, GPS receiver and GSM modem. The GPS receiver receives the location data from the satellite in the form of latitude and longitude. When a person presses the sos button, the raspberry pi processor processes this information and send it to the predefined registered mobile numbers through GSM modem. This research work can be applied in the safety sector for women. It reduces the crime rate against women to a major extent. 
Keywords: Wrist band Raspberry pi3, GSM, GPS, SOS, LED, and LCD.
Scope of the Article: Remote Sensing, GIS and GPS