Design of Dual Band Mono Pole Antenna for UWB and Ku Band Applications
Penchala Reddy Sura1, S Narayana Reddy2

1Penchala Reddy Sura, Department of Engineering and Communication Engineering, Visvodaya Engineering College / Kavali, India.
2S Narayana Reddy, Department of Engineering and Communication Engineering, SV University/ Tirupati, India.

Manuscript received on 01 July 2019 | Revised Manuscript received on 09 July 2019 | Manuscript published on 30 July 2019 | PP: 3094-3098 | Volume-8 Issue-9, July 2019 | Retrieval Number: I8253078919/19©BEIESP | DOI: 10.35940/ijitee.I8253.078919

Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (

Abstract: Over the past few decades, the evolution in new-fashioned wireless communication systems has actuated augmented exploration on uncomplicated dual band antennas. A compact dual band mono pole antenna for UWB and Ku Band Applications is proposed. The antenna consists of a corner truncated rectangular patch etched on cost effective FR4-substrate with thickness 1.6mm and is fed with 50 ohms feed line. The ground plane is truncated to enhance impedance matching and bandwidth. The proposed antenna has the ability to operate from 3.40 GHz to 10.67 GHz and 13.48 GHz to 15.87 GHz with return loss below -10 dB. The HFSS is used to design and simulate the antennas behavior over the different frequency ranges. The simulated results of the proposed antenna indicate higher gain at the two bands. The measured results demonstrated reasonable agreement with the simulated results.
Keywords: Corner Truncated, Dual, Mono Pole, Ku Band, UWB.

Scope of the Article: Software Design Patterns