Design of Components of 4 Stroke Engine using Hybrid Metal Matrix
V Amit M Naidu1, S.D. Shelare2, S.M. Awatade3

1V Amit M Naidu, Student, Department of Mechanical Engineering, Priyadarshini College of Engineering, Nagpur, Maharashtra, India.
2Prof. S.D. Shelare, Assistant Professor, Department of Mechanical Engineering, Priyadarshini College of Engineering, Nagpur, Maharashtra, India.
3Prof. S.M. Awatade, Assistant Professor, Department of Mechanical Engineering, Priyadarshini College of Engineering, Nagpur, Maharashtra, India.
Manuscript received on July 15, 2020. | Revised Manuscript received on July 28, 2020. | Manuscript published on August 10, 2020. | PP: 238-242 | Volume-9 Issue-10, August 2020 | Retrieval Number: 100.1/ijitee.J75090891020 | DOI: 10.35940/ijitee.J7509.0891020
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: In the present study of Aluminum Metal Matrix Composites (AMMCs), specifically speaking, in our case Al-SiC-graphite have been discussed on the basis of literature review, comprising of similar characteristics of base aluminum alloy but not completely identical. Aluminum metal matrix composites have different properties when compared with Cast Iron and Aluminum. This difference in properties gives us a chance to design components which may give better results than the conventional ones. In a new approach, we are trying to develop new components for 4 Stroke Petrol Engine namely piston & connecting rod, which would have better Tensile Strength, Young’s Modulus & Low Thermal Conductivity as compared to the pure Aluminum. Paper Setup must be in A4 size with Margin: Top 0.7”, Bottom 0.7”, Left 0.65”, 0.65”, Gutter 0”, and Gutter Position Top. Paper must be in two Columns after Authors Name with Width 8.27”, height 11.69” Spacing 0.2”. Whole paper must be with: Font Name Times New Roman, Font Size 10, Line Spacing 1.05 EXCEPT Abstract, Keywords (Index Term), Paper Tile, References, Author Profile (in the last page of the paper, maximum 400 words), All Headings, and Manuscript Details (First Page, Bottom, left side).Paper Title must be in Font Size 24, Bold, with Single Line Spacing. Authors Name must be in Font Size 11, Bold, Before Spacing 0, After Spacing 16, with Single Line Spacing. Please do not write Author e-mail or author address in the place of Authors name. Authors e-mail, and their Address details must be in the Manuscript details. Abstract and Keywords (Index Term) must be in Font Size 9, Bold, Italic with Single Line Spacing. All MAIN HEADING must be in Upper Case, Centre, and Roman Numbering (I, II, III…etc), Before Spacing 12, After Spacing 6, with single line spacing. All Sub Heading must be in Title Case, Left 0.25 cm, Italic, and Alphabet Numbering (A, B, C…etc), Before Spacing 6, After Spacing 4, with Single Line Spacing. Manuscript Details must be in Font Size 8, in the Bottom, First Page, and Left Side with Single Line Spacing. References must be in Font Size 8, Hanging 0.25 with single line spacing. Author Profile must be in Font Size 8, with single line spacing. Fore more details, please download TEMPLATE HELP FILE from the website. 
Keywords:  Al-SiC-Graphite Specimen, Melting Metallurgy Metal matrix.
Scope of the Article: Aluminum Metal Matrix Composites