An Integrated Evaluation of Manufactured Sand and Metakaolin Impacts on Concrete Properties
Muppalla Venkata Sai Surya Pratap Chowdary1, P.Poluraju2, T.Suresh babu3, SS.Asadi4
1Muppalla Venkata Sai Surya Pratap Chowdary*, department of Civil Engineering, Vignan’s Foundation for Science, Technology & Research, Guntur, India.
2P.Poluraju, Department of Civil Engineering, V.R.Siddartha Engineering College, Vijayawada India.
3T.Suresh babu, department of Civil Engineering, Visvodaya Engineering College, Kavali, India.
4SS. Aadi, Profesor, Department of civil Engineering, Vignan’s Foundation for Science, Technology& Research, Guntur, India.
Manuscript received on September 16, 2019. | Revised Manuscript received on 24 September, 2019. | Manuscript published on October 10, 2019. | PP: 188-192 | Volume-8 Issue-12, October 2019. | Retrieval Number: L35311081219/2019©BEIESP | DOI: 10.35940/ijitee.L3531.1081219
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: This paper deals with M25 Concrete mix in which replacing Natural Sand by the Manufacturing Sand of 35% and 65% at Cement by Metakaolin of 0, 5, 10, 15 and 20 percentages is compared with concrete had cement with Metakaolin at different percentages without replacement of natural sand .Workability is determined for Concrete and Cylindrical specimens of 150mm*300mm of size are casted to test Concrete properties such as Split Tensile strength(STS) and Compressive Strength(CS) of Concrete. These specimens are placed under curing of 7days, 28days and 60days; after that time placed under testing and compared the results with Normal Concrete.
Keywords: Metakaolin, Manufacturing Sand, Workability, Split tensile strength and Compressive Strength
Scope of the Article: Manufacturing Processes