Development and Substantiation of the Parameters of the Battery Mechanism with Elastic Elements of the Weaving Machines
A.Djuraev1, Sh. Kh. Madrakhimov2, A.P. Mavlyanov3, S. Urinova4
1Anvar Djuraev*, Doctor of Technical Sciences, Professor, Department of General Technical Disciplines, Tashkent Institute of Textile and Light Industry Tashkent, Uzbekistan.
2Shavkat Khalimovich Madrakhimov, Doctor of Philosophy in Engineering (Ph. D), Department of General Technical Disciplines, Tashkent Institute of Textile and Light Industry, Tashkent, Uzbekistan.
3Aybek Palvanbaevich Mavlyanov, Doctor of Philosophy in Engineering (Ph. D), Department of General Technical Disciplines, Tashkent Institute of Textile and Light Industry, Tashkent, Uzbekistan
4Urinova Sohiba Isroilzhonovna, Scientific Applicant, Department of General Technical Disciplines, Tashkent Institute of Textile and Light Industry, Tashkent, Uzbekistan.
Manuscript received on December 12, 2019. | Revised Manuscript received on December 22, 2019. | Manuscript published on January 10, 2020. | PP: 3343-3348 | Volume-9 Issue-3, January 2020. | Retrieval Number: C8902019320/2020©BEIESP | DOI: 10.35940/ijitee.C8902.019320
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: The article provides the scheme and principle of operation of the batan mechanism with elastic elements of looms. Based on theoretical studies, an expression is determined to determine the maximum compression moment of a torsion spring. From the equilibrium condition of the three-arm lever of the batan, the laws of movement of the reed are determined. The results of numerical solution of problems are presented. Studies substantiated the parameters of the mechanism. Based on the tests, the ways of increasing the productivity of the machine are substantiated..
Keywords: Loom, Batan Mechanism, Elastic Element, law of Motion, Degree of Mobility, Oscillations, Mat, Performance.
Scope of the Article: Machine Design