Performance Analysis of Electromechanical Tuner for Broadband Application
Hetal M Pathak1, Shweta N Shah2

1Hetal M Pathak*, Babaria Institute of Technology, Vadodara, India.
2Shweta N Shah, National Institute of Technology, Surat, India.
Manuscript received on June 13, 2020. | Revised Manuscript received on June 24, 2020. | Manuscript published on July 10, 2020. | PP: 11-13 | Volume-9 Issue-9, July 2020 | Retrieval Number: 100.1/ijitee.F3836049620 | DOI: 10.35940/ijitee.F3836.079920
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (

Abstract: The greatest challenges to RF power devices are to match impedance for coupled network. Many causes for improper impedance results in cable loss, reflection losses and hence reduce the performance of existing system. An Impedance tuner is designed for testing prior to final set up to get satisfactory output with saving time. In modern communication systems many technologies are adding relay coils and other compensating passive components. In this paper, an impedance matching tuner is designed for multiband application with compact and cost effective structure. The characteristics of fabricated tuner is designed for 50 ohm matching two port network .The designed Electro mechanical tuner is manually characterised on the basis of experimental results to validate the system. The results suggest that it works for multiband sub GHz, Bluetooth sensor application. 
Keywords:  Impedance tuner, VSWR, Insertion loss, Electromagnetic Interference
Scope of the Article: Mechanical Design