Stress Analysis of Plate With Oblique Hole
B.C.Patle1, D.V. Bhope2
1B.C.Patle, Dept of Mechanical Engineering, Rajiv Gandhi College of Engineering, Research and Technology, Chandrapur (M.S.) India.
2Dr. D.V. Bhope, Professor, Dept of Mechanical Engineering, Rajiv Gandhi College of Engineering, Research and Technology, Chandrapur (M.S.) India.
Manuscript received on October 01, 2012. | Revised Manuscript received on October 20, 2012. | Manuscript Published on September 10, 2012. | PP: 13-17 | Volume-1 Issue-4, September 2012. | Retrieval Number: D0245081412/2012©BEIESP
Open Access | Ethics and Policies | Cite
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: In this study, the wok is carried out to analyzed, the stresses of plate with oblique hole with the Finite Element Analysis. Stress analysis of a series of flat plates with oblique holes subjected to axial tension has been carried out using the finite element method (FEM). Different plate hole diameter-width ratios, angles of hole obliquity have been considered to provide stress concentration factors at such holes. The work covers plate hole diameter- width (d/w) ratios from 0.1 to 0.9, hole obliquity angles from 00 to 800 and inclination of hole axis in widthwise, lengthwise and diagonal wise direction, 300 direction and 600 direction.
Keywords: Finite Element Method, Oblique Hole, Stress Analysis.